48 volt torque vectoring electric rear drive module (eRDM) – Excellent driving dynamics with significant CO2 savings

2018 ◽  
pp. I-517-I-528
Author(s):  
T. Högnäs ◽  
G. Beldie
Keyword(s):  
Author(s):  
Mingcong Cao ◽  
Chuan Hu ◽  
Rongrong Wang ◽  
Jinxiang Wang ◽  
Nan Chen

This paper investigates the trajectory tracking control of independently actuated autonomous vehicles after the first impact, aiming to mitigate the secondary collision probability. An integrated predictive control strategy is proposed to mitigate the deteriorated state propagation and facilitate safety objective achievement in critical conditions after a collision. Three highlights can be concluded in this work: (1) A compensatory model predictive control (MPC) strategy is proposed to incorporate a feedforward-feedback compensation control (FCC) method. Based on the definite physical analysis, it is verified that adequate reverse steering and differential torque vectoring render more potentials and flexibility for vehicle post-impact control; (2) With compensatory portions, the deteriorated states after a collision are far beyond the traditional stability envelope. Hence it can be further manipulated in MPC by constraint transformation, rather than introducing soft constraints and decreasing the control efforts on tracking error; (3) Considering time-varying saturation on input, input rate, and slip ratio, the proposed FCC-MPC controller is developed to improve faster deviation attenuation both in lateral and yaw motions. Finally two high-fidelity simulation cases implemented on CarSim-Simulink conjoint platform have demonstrated that the proposed controller has the advanced capabilities of vehicle safety improvement and better control performance achievement after severe impacts.


Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1291
Author(s):  
Balázs Németh

The paper proposes a novel learning-based coordination strategy for lateral control systems of automated vehicles. The motivation of the research is to improve the performance level of the coordinated system compared to the conventional model-based reconfigurable solutions. During vehicle maneuvers, the coordinated control system provides torque vectoring and front-wheel steering angle in order to guarantee the various lateral dynamical performances. The performance specifications are guaranteed on two levels, i.e., primary performances are guaranteed by Linear Parameter Varying (LPV) controllers, while secondary performances (e.g., economy and comfort) are maintained by a reinforcement-learning-based (RL) controller. The coordination of the control systems is carried out by a supervisor. The effectiveness of the proposed coordinated control system is illustrated through high velocity vehicle maneuvers.


Author(s):  
Francesco Braghin ◽  
Edoardo Sabbioni ◽  
Gabriele Sironi ◽  
Michele Vignati

In last decades hybrid and electric vehicles have been one of the main object of study for automotive industry. Among the different layout of the electric power-train, four in-wheel motors appear to be one of the most attractive. This configuration in fact has several advantages in terms of inner room increase and mass distribution. Furthermore the possibility of independently distribute braking and driving torques on the wheels allows to generate a yaw moment able to improve vehicle handling (torque vectoring). In this paper a torque vectoring control strategy for an electric vehicle with four in-wheel motors is presented. The control strategy is constituted of a steady-state contribution to enhance vehicle handling performances and a transient contribution to increase vehicle lateral stability during limit manoeuvres. Performances of the control logic are evaluated by means of numerical simulations of open and closed loop manoeuvres. Robustness to friction coefficient changes is analysed.


2006 ◽  
Vol 44 (sup1) ◽  
pp. 313-320 ◽  
Author(s):  
M. Croft-White ◽  
M. Harrison
Keyword(s):  

ATZ worldwide ◽  
2017 ◽  
Vol 119 (10) ◽  
pp. 46-49
Author(s):  
Theo Gassmann ◽  
Dirk Gueth ◽  
Jan Haupt
Keyword(s):  

ATZ worldwide ◽  
2010 ◽  
Vol 112 (6) ◽  
pp. 8-12 ◽  
Author(s):  
Reiner Folke ◽  
Ralph Böker ◽  
Adrian Thomys ◽  
Lars König

Author(s):  
Federico Cheli ◽  
Sidharth Dave ◽  
Michele Vignati
Keyword(s):  

2017 ◽  
Vol 56 (2) ◽  
pp. 221-248 ◽  
Author(s):  
E. N. Smith ◽  
E. Velenis ◽  
D. Tavernini ◽  
D. Cao

Sign in / Sign up

Export Citation Format

Share Document