scholarly journals A Transport Protocol for Future Wireless Internets

Author(s):  
Deddy Chandra ◽  
Richard J Harris

The traditional assumptions made by TCP about the operation of wired networks are often found to be invalid for wireless networks. Standard TCP semantics such as end-to-end flow control, congestion control mechanisms and error recovery provide reliability in wired networks. However, wireless communication systems have different characteristics when compared to wired networks that include higher bit error rates, higher latency, limited bandwidth, multipath fading of the signals and handoff. In this paper, we propose an enhancement to TCP that we shall call ETCP, which improves upon conventional TCP when it is applied to the wireless environment. Our simulation results show significant improvements to TCP performance with respect to packet loss detection.

2021 ◽  
Author(s):  
Carlos Molero ◽  
Ángel Palomares-Caballero ◽  
Antonio Alex-Amor ◽  
Ignacio Parellada-Serrano ◽  
Francisco Gamiz ◽  
...  

The upcoming high-speed wireless communication systems will be hosted by millimeter and sub-millimeter-wave frequency bands. At these frequencies, electromagnetic waves suffer from severe propagation losses and non-line-of-sight (NLOS) scenarios. A new wireless communication paradigm has arrived to resolve this situation through the use of reconfigurable intelligent surfaces (RIS). These metadevices are designed to reconfigure the wireless environment in a smart way. Traditional RIS designs based on the implementation of 2-D configurations have been considered up to now. However, 3-D structures enable an extra degree of freedom in the design that can be taken as an advantage for the development of improved RIS structures with advanced functionalities. This article proposes the implementation of a novel electronically-reconfigurable RIS based on the use of 3-D graphene meta-atoms. The reconfigurability lies on the graphene conductivity, easily tunable with a biasing voltage. Different conductivity values vary the meta-atom electromagnetic response, modifying the RIS functionality. A multi-objective optimization framework determines the optimal phase state of each meta-atom to accomplish the desired RIS performance. The operation of the RIS as an efficient beam steerer/splitter, absorber and polarization selector is validated with full-wave results.


2021 ◽  
Author(s):  
Carlos Molero ◽  
Ángel Palomares-Caballero ◽  
Antonio Alex-Amor ◽  
Ignacio Parellada-Serrano ◽  
Francisco Gamiz ◽  
...  

The upcoming high-speed wireless communication systems will be hosted by millimeter and sub-millimeter-wave frequency bands. At these frequencies, electromagnetic waves suffer from severe propagation losses and non-line-of-sight (NLOS) scenarios. A new wireless communication paradigm has arrived to resolve this situation through the use of reconfigurable intelligent surfaces (RIS). These metadevices are designed to reconfigure the wireless environment in a smart way. Traditional RIS designs based on the implementation of 2-D configurations have been considered up to now. However, 3-D structures enable an extra degree of freedom in the design that can be taken as an advantage for the development of improved RIS structures with advanced functionalities. This article proposes the implementation of a novel electronically-reconfigurable RIS based on the use of 3-D graphene meta-atoms. The reconfigurability lies on the graphene conductivity, easily tunable with a biasing voltage. Different conductivity values vary the meta-atom electromagnetic response, modifying the RIS functionality. A multi-objective optimization framework determines the optimal phase state of each meta-atom to accomplish the desired RIS performance. The operation of the RIS as an efficient beam steerer/splitter, absorber and polarization selector is validated with full-wave results.


2021 ◽  
Author(s):  
Ángel Palomares-Caballero ◽  
Carlos Molero ◽  
Antonio Alex-Amor ◽  
Ignacio Parellada-Serrano ◽  
Francisco Gamiz ◽  
...  

The upcoming high-speed wireless communication systems will be hosted by millimeter and sub-millimeter-wave frequency bands. At these frequencies, electromagnetic waves suffer from severe propagation losses and non-line-of-sight (NLOS) scenarios. A new wireless communication paradigm has arrived to resolve this situation through the use of reconfigurable intelligent surfaces (RIS). These metadevices are designed to reconfigure the wireless environment in a smart way. Traditional RIS designs based on the implementation of 2-D configurations have been considered up to now. However, 3-D structures enable an extra degree of freedom in the design that can be taken as an advantage for the development of improved RIS structures with advanced functionalities. This article proposes the implementation of a novel electronically-reconfigurable RIS based on the use of 3-D graphene meta-atoms. The reconfigurability lies on the graphene conductivity, easily tunable with a biasing voltage. Different conductivity values vary the meta-atom electromagnetic response, modifying the RIS functionality. A multi-objective optimization framework determines the optimal phase state of each meta-atom to accomplish the desired RIS performance. The operation of the RIS as an efficient beam steerer/splitter, absorber and polarization selector is validated with full-wave results.


2021 ◽  
Author(s):  
Ghasan Ali Hussain

Abstract In mobile communication systems, there are errors that will be generated in the digital signal due to fading and interference. Consequently, different techniques are used to improve the system's reliability and enhance the signal's robustness. Channel coding techniques are used to enhance the system reliability of 5G wireless communication systems . In the upcoming wireless technologies, LDPC codes are still introduced as an alternative to turbo codes. However, the error floor phenomenon is one of the biggest demerits of using LDPC code in the different communication systems that need low error rates. This paper uses RS codes with LDPC codes in a concatenated code to solve this demerit of LDPC codes. Meanwhile, a modified concatenated RS/LDPC codes are created using outer RS codes with inner LDPC codes then appended by interleaver, unlike the conventional concatenated codes that use the interleaver between both codes. Thereafter, the modified concatenated RS/LDPC codes were suggested to enhance BER performance for the f-OFDM system. The results showed that using the proposed concatenated code outperformed using single and familiar concatenated RS/LDPC code in terms of improving BER performance. Meanwhile, the proposed system achieved lower OOBE values than the conventional OFDM system. Therefore, the resulted system can be introduced as a competitor candidate for 5G wireless communication systems due to these features


Author(s):  
Ertugrul Basar

Owing to the envisioned new use-cases, such as immersive virtual reality and high-fidelity mobile hologram, and their potential challenging new requirements for future wireless networks, extensive research has already started on 6G and beyond wireless technologies. Despite the fact that several modern physical layer solutions have been introduced in the past decade, a level of saturation has been reached in terms of the available spectrum and adapted modulation/coding solutions, which accordingly limits the maximum capacity and reliability. Within this respective, reconfigurable intelligent surface (RIS)-empowered communication appears as a potential candidate to overcome the inherent drawbacks of legacy wireless systems. The core idea of RIS-assisted communication is the transformation of the random and uncontrollable wireless propagation environment into a reconfigurable communication system entity that plays an active role in conveying information and improving system performance. In this paper, the well-known multipath fading phenomenon is revisited in mobile wireless communication systems, and novel and unique solutions are introduced from the perspective of RISs. The feasibility of eliminating or mitigating the multipath fading effect stemming from the movement of mobile receivers is also investigated by utilizing RISs. It is shown that rapid fluctuations in the received signal strength due to the Doppler effect can be effectively reduced by using real-time tunable RISs. It is also proven that for a hypothetical propagation environment where all reflectors are coated with RISs, the multipath fading effect can be totally eliminated. Furthermore, we show that for more general propagation environments with several interacting objects, even a few real-time tunable RISs can remarkably reduce the Doppler spread and the deep fades in the received signal.


Sign in / Sign up

Export Citation Format

Share Document