scholarly journals Evaluation of the effectiveness of different immunostimulatory medicine at the experimental trichinosis and leishmaniosis on white mice

2021 ◽  
Vol 18 (02) ◽  
pp. 12-12
Author(s):  
Olga Zhdanova ◽  
O.V. Rudneva ◽  
J.K. Akulinina ◽  
L.A. Napisanova
Keyword(s):  
Treatment Time ◽  
Trichinella Spiralis ◽  
Gastrointestinal Nematode ◽  
Control Group ◽  
Protective Efficiency ◽  
Sterile Saline ◽  
Group 3 ◽  
Group 5 ◽  
Group 2

Immunostimulatory drugs in recent years are widely used in Parasitology. Also, homeopathic drugs such as Cina have anti-helmintic and immunostimulation properties. We studied the possibility of using immunostimulating and high dilutions drugs during parasitological disease treatment. Two experimental parasitological disease models (trichinelosis and cutaneous leishmaniosis) were used. Trichinellosis caused by gastrointestinal nematode Trichinella spiralis occurs in humans, domestic and wild animals. Leishmaniasis is a disease caused by parasites of Leishmania genus. It is spread by certain sandflies types bite. The disease can present in three main ways. We used 2 leishmania in vitro models and experimental mice cutaneous model. The cutaneous form presents skin ulcers, while the mucocutaneous form presents skin, mouth, and nose ulcers. For estimation of immunostimulatory efficacy, size of leishmanioma, presence of leishmania in the ulcer, and treatment time were analyzed. This study aimed at to assess the protective efficiency of homeopathic drug such as Cina C6cH and interferon 2 and inductors of interferons of types 1 and 2 interferon, against experimental trichinosis and leichmaniosis. An assay was carried out on 50 white outbred mice. These were divided into three groups of ten mice each. Group 1 was injected with interferon inductors (2.16 mg/mouse in 0.2 ml sterile saline, intramuscularly); group 2 - desoldering dissolved in water Cina C6cH one time a day per os. The group 3 received interferone-a2b; and the group 4 was injected 0.2 ml of sterile 0.9% NaCl. The group 5 was only for leishmaniasis. After a 48 hours regimen, the groups 1-3 were inoculated with a dose of 80 ± 5 units of T. spiralis larva per mouse. After 90 days of trichinellosis incubation, and during one year of leishmaniasis process the mice were euthanized and dissected for evaluation. Maximum protection was obtained in mice immunized with interferon-a2b and its stimulatory, as T. spiralis detected larvae in animals was 733.5±25.1 larva/animal. Cina C6cH immunized group presented 2840.5±183.3 larva/animal. This was less than control group (4485±430.6 larva/mouse). Also mice with leishmaniasis had fewer ulcers during treatment with immune stimulating. Ulcers sizes were 0.46+0.05 (group 3); 2.2 +0.5 (group 2), and 3.2+0.8 (group 5). Leishmanial amount in the ulcer was 3.1 +0.7(group 3), 3.6 +0.4 (group 2), and 3.7+0.3(goup 5). The time of the treatment in the 3-d group was 19.2+0.9 and more than 40 days in all group (2,4,5). So, based on this, we consider it advantageous to continue the study of immunostimulatory drugs in the complex treatment of trichinelosis and leishmaniosis.

scholarly journals Protective action by homeopathic drug Cina C6cH and immune modulator «Recombinant human INTERLEUKIN-2» against experimental trichinosis of mice

2021 ◽  
Vol 15 (4) ◽  
pp. 17-17
Author(s):  
Runeva V. Olga ◽  
Liudmila A. Napisanova ◽  
Vera K. BEREZHKO
Keyword(s):  
Trichinella Spiralis ◽  
Protective Action ◽  
Interleukin 2 ◽  
Gastrointestinal Nematode ◽  
Control Group ◽  
Protective Efficiency ◽  
Sterile Saline ◽  
Homeopathic Drug ◽  
Group 2 ◽  
Homeopathic Drugs

Trichinellosis caused by the gastrointestinal nematode Trichinella spiralis occurs in humans, domestic animals and wild animals. This heavy ubiquitous parasitic disease. The muscle phase of the parasite of difficult to controlling. Homeopathic drugs such as Cina have anthelmintic and immunostimulation properties. The purpose of this study was assess the protective efficiency of homeopathic drug such as Cina C6cH and Roncoleukin ® (recombinant interleukin-2 (rIL-2) immunostimulation) against experimental trichinosis, that can affect the muscle phase of the parasite T. spiralis in mice. An assay was carried out on 30 white outbred mice. These were divided into tree groups of ten mice each. The group 1 were treated with the Roncoleukin ® (100 IU/per mouse in 0,2 ml sterile saline intramuscularly, twice with 48 hours intervals); the group 2 - desoldering dissolved in water Cina C6cH (under the scheme). The group 3 received 0.2 ml of sterile 0.9% NaCl. After a 21 day regimen, the groups were inoculated with a dose of 80 ± 5 units of Trihinella spiralis larva per mouse. After 90 days of incubation, the mice were euthanized and dissected for evaluation. The maximum protection was obtained in mice immunized with Roncoleukin ® (80,61%; 869,5±16,6 larva/per animal). The protective effect in the group immunized by Cina C6cH was of 36,67 ( (2840,5±183,3 larva/per animal)%. In control group invasion on muscle phase T.spiralis was 4485±430,6 larva/per animal/ In conclusion, the use of homeopathic drugs also reduces in the number of infective Trichinella spiralis larvae in mice and has a synergistic effect on the treatment.

scholarly journals Effect of the number of thermocycles on microleakage of resin composite restorations

2003 ◽  
Vol 17 (4) ◽  
pp. 337-341 ◽  
Author(s):  
Flávia Bittencourt Pazinatto ◽  
Bruno Barbosa Campos ◽  
Leonardo César Costa ◽  
Maria Teresa Atta
Keyword(s):  
Resin Composite ◽  
Control Group ◽  
Group 4 ◽  
Thermal Changes ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Number Of Cycles ◽  
Group 1

Thermocycling simulates, in vitro, thermal changes that occur in the oral cavity. The aim of this study was to evaluate the influence of the number of cycles on microleakage. Class V cavities (1.5 mm deep, 3 mm in height and 3 mm in width) were prepared in bovine teeth, restored with a Single Bond/Z250 restorative system (3M/ESPE) and then divided into five groups of ten teeth each: group 1 was not thermocycled (control group), and groups 2, 3, 4 and 5 were thermocycled 500, 1,000, 2,500 and 5,000 times, respectively (5º-55º ± 2ºC, 15 s dwell time). The teeth were immersed in 0.5% basic fuchsin aqueous solution for 24 h, sectioned and the sections with the highest degree of microleakage were selected, scanned and the extent of dye penetration was measured by the ImageTool program. The results submitted to one-way ANOVA showed no significant differences between the groups (p > 0.05). The averages of microleakage values in millimeters were: group 1 (3.92); group 2 (3.13); group 3 (4.48); group 4 (4.33) and group 5 (3.42). Thus, it was concluded that there is no relation between the increase of the number of cycles and the increase in microleakage.

scholarly journals Effectiveness of medical treatment in overcoming the ureteral double-J stent related symptoms

2012 ◽  
Vol 6 (6) ◽  
pp. 234 ◽  
Author(s):  
Ugur Kuyumcuoglu ◽  
Bilal Eryildirim ◽  
Murat Tuncer ◽  
Gokhan Faydaci ◽  
Fatih Tarhan ◽  
...  
Keyword(s):  
The Body ◽  
Control Group ◽  
Group 4 ◽  
Double J Stent ◽  
Urinary Tract Symptoms ◽  
Stone Treatment ◽  
Group 3 ◽  
Group 5 ◽  
Group 2

Background: We investigated whether the frequency of lower urinary tract symptoms (LUTS) increased in patients in whom double-J stents were applied. We also evaluated several medical therapy protocols to treat symptoms related with ureteral stents.Materials and Methods: A total of 108 patients, in whom unilateral double-j stent was applied during ureteral stone treatment, were included. Before the double-J stent was applied, all patients completed storage components of the “International Prostate Symptom Score” (IPSSs), quality of life components of the IPSS (IPSS-QOL) and “Overactive Bladder Questionnaire” (OABq) forms and scores were calculated. After the procedure, cases were randomized into 5 groups, an antiinflammatory was given to Group 1, spasmolytic to Group 2, anticholinergic to Group 3 and α-blocker to Group 4. No additional drug was given to Group 5 as this control group. During the fourth week of the procedure, IPSSs, IPSS-QOL and OABq forms were again completed and scores were compared with the previous ones.Results: When all the cases were evaluated, the IPSSs, IPSS-QOLand OABq scores of patients in whom the double-J stent was applied were statistically significantly higher the procedure. Compared to the control group, the cases where the double-J stent was applied showed a higher IPSSs, IPSS-QOL and OABq scores and none of the medical therapies could prevent this increase.Interpretation: The frequency of LUTS increased in cases where the ureteral stent was applied and discomfort continued as long as the stent stayed in the body.

scholarly journals Zingerone Ameliorates Hepatotoxicity

2020 ◽  
Vol 11 (1) ◽  
pp. 280-284 ◽  
Author(s):  
Julietpoornamathy J ◽  
Parameswari C.S.
Keyword(s):  
The Body ◽  
Control Group ◽  
Medical Sciences ◽  
Toxic Compounds ◽  
Group 4 ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Insight Into ◽  
Group 1

In medical sciences, toxicity is an area wherein extensive studies have been carried to improve the diseases as well as to prevent. So, there is a high requirement for novel and improved alternative therapeutic strategies to manage diseases. The liver is the largest gland in the body, which executes several important mechanisms; it stores minerals and vitamins and releases them in periods of need. The main aim of this study was to give a closer insight into potent non- toxic compounds that is capable of modifying the responses. Animals were divided into five equal groups viz control (Group 1), administered with food and water ad libitum, (Group 2) administered with olive oil, (Group 3) administered with zingerone, (Group 4) administered with concanavalin A, (Group 5) administered with cyclosporine A followed by zingerone. Our results revealed significant changes in liver marker enzymes and liver histology of zingerone treated rats when compared to control rats.  A corollary, zingerone has no toxic effect on hepatocytes and was found to be safe at a dose of 10mg/kg b wt and also ameliorates hepatotoxicity.

scholarly journals The Influence of Post Bleaching Treatments in Stain Absorption and Microhardness

2016 ◽  
Vol 10 (1) ◽  
pp. 69-78 ◽  
Author(s):  
Horieh Moosavi ◽  
Fatemeh Darvishzadeh
Keyword(s):  
Color Change ◽  
Enamel Surface ◽  
Control Group ◽  
Surface Microhardness ◽  
Dental Bleaching ◽  
Tooth Color ◽  
Group 4 ◽  
Group 3 ◽  
Group 2

Objectives: This study investigated the effects of post bleaching treatments to prevent restaining and the change of enamel surface microhardness after dental bleaching in vitro. Methods: Sixty intact human incisor teeth were stained in tea solution and randomly assigned into four groups (n=15). Then samples were bleached for two weeks (8 hours daily) by 15% carbamide peroxide. Tooth color was determined both with a spectrophotometer and visually before bleaching (T1) and immediately after bleaching (T2). Next, it was applied in group 1 fluoride (Naf 2%) gel for 2 minutes, and in group 2 a fractional CO2 laser (10 mJ, 200 Hz, 10 s), and in group 3, nanohydroxyapatite gel for 2 minutes. The bleached teeth in group 4 remained untreated (control group). Then teeth placed in tea solution again. Color examinations were repeated after various post bleaching treatments (T3) and restaining with tea (T4) and color change values recorded. The microhardness was measured at the enamel surface of samples. Data was analyzed using ANOVA, Tukey HSD test and Dunnett T3 (α = 0.05). Results: Directly after bleaching (ΔE T3-T2), the treatment with nanohydroxyapatite showed significantly the least color lapse in colorimetric evaluation. In experimental groups, the color change between T3 and T4 stages (ΔE T4-T3) was significantly lower than control group (P < 0.05). Different methods of enamel treatment caused a significant increase in surface microhardness compared to control group (P < 0.05). Significance: Application of fluoride, fractional CO2 laser and nanohydroxyapatite as post bleaching treatments are suggested for prevention of stain absorption and increasing the hardening of bleached enamel.

Evaluation of physical and adhesive properties of enamel after a therapeutic dose of radiation and bonding of orthodontic metal brackets: an in vitro study

2020 ◽  
pp. 1-5
Author(s):  
A. Anushree ◽  
Ashutosh Shetty ◽  
Crystal Runa Soans ◽  
M. N. Kuttappa ◽  
Akhil Shetty ◽  
...  
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Tooth Surface ◽  
Control Group ◽  
Adhesive Properties ◽  
Adhesive Resin ◽  
Adhesive Remnant Index ◽  
Group 3 ◽  
Group 2

Abstract Aim: The study aimed to evaluate the shear bond strength (SBS) of metal brackets and adhesive properties of bonded irradiated and non-irradiated teeth. Methods: Sixty-six extracted premolar samples were randomly divided into three groups—(a) Control group consisting of 22 non-irradiated, non-aged teeth (Group 1), (b) 22 non-irradiated, aged samples (Group 2) and (c) 22 irradiated, aged samples (Group 3). Irradiation was done using gamma irradiation with a fractionated dose of 60 Gy for 5 consecutive days per week over 6 weeks. Metal brackets were bonded on all samples with light cure adhesive and subjected to SBS test using universal testing machine. The samples were assessed under the scanning electron microscope to check for the adhesive remnant index (ARI) and tag depth. Results: There was a statistically significant decrease in the mean SBS of the irradiated samples compared to the non-irradiated teeth. The non-irradiated, aged samples showed a majority of ARI scoring 1 and 2. Whereas, the irradiated samples showed ARI scoring 2 and 3. Approximately, 77·3% of the non-irradiated samples showed no adhesive present on the tooth surface, and 27·2% of the irradiated samples had more than 50% adhesive present on the enamel surface. Conclusion: There is a statistically significant decrease in SBS of irradiated enamel compared to that of non-irradiated teeth. However, the SBS observed in the three groups was well above the ideal SBS for orthodontic bonding, that is, 5·6–6·8 MPa. The adhesive remnant was found on all samples of the irradiated group. Deeper adhesive resin tags were found in the irradiated group in the resin–enamel interface.

scholarly journals AN INVITRO COMPARATIVE EVALUATION OF FRACTURE RESISTANCE OF ENDODONTICALLY TREATED TEETH OBTURATED WITH RESILON AND GUTTA-PERCHA

2014 ◽  
Vol 04 (03) ◽  
pp. 075-079
Author(s):  
Kiran Halkai ◽  
Rahul Halkai ◽  
Mithra N. Hegde ◽  
Vijay Kumar ◽  
Keyword(s):  
Fracture Resistance ◽  
Testing Machine ◽  
Control Group ◽  
Endodontically Treated Teeth ◽  
Group 4 ◽  
Anterior Teeth ◽  
Ah Plus ◽  
Group 3 ◽  
Group 2

Abstract Aim: To compare and evaluate in-vitro the fracture resistance of endodontically treated teeth obturated with resilon & epiphany sealer and guttapercha using different sealers. Epoxy resin based sealer AH-plus and zinc oxide eugenol based sealer-TubliSeal (EWT). Methodology: sixty four human single rooted maxillary anterior teeth, cleaned stored in 0.9% saline. All the teeth were decoronated to root length 14mm and bucco-lingual diameter of 5-7mm, After access openings teeth were instrumented using K3.06 up to final apical size 30/.06 and randomly allocated into 4 experimental groups (n=16 per group). Group 1(Control group): teeth were instrumented but not obturated, Group 2: Resilon cones and epiphany SE-sealer. Group 3: guttapercha cones and epoxy based sealer AH plus. Group 4: guttapercha and Tubli seal EWT. Coronal seal was done using IRM cement. Each of the specimens were tested for fracture resistance by instron universal testing machine. Results: Higher fracture resistance values were observed for group 2 (Resilon & Epiphany SE sealer) followed by group 3(Guttapercha & AH Plus sealer) and group 4(Guttapercha & TubliSeal EWT) when compared to group1 (control-instrumented but not obturated). Conclusion: filling the root canals with contemporary polymer based root canal obturating system- Resilon increased the in vitro fracture resistance of endodontically treated teeth.

scholarly journals FE-SEM Evaluation of Dental Specimens Prepared by Different Methods forIn VitroContamination

2012 ◽  
Vol 2012 ◽  
pp. 1-5
Author(s):  
Vitor Cesar Nakamura ◽  
Simony Hidee Hamoy Kataoka ◽  
Giulio Gavini ◽  
Patrícia Helena Ferrari ◽  
Silvana Cai
Keyword(s):  
Control Group ◽  
Buffer Solution ◽  
Morphological Alterations ◽  
Ultrasonic Bath ◽  
Group 4 ◽  
Cement Removal ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Group 1

Objective. To evaluate through FE-SEM the cleanliness and dentinal alterations promoted by different methods of dental sample preparation.Methods. Twenty-five human single-rooted teeth were used. The teeth were cleaned and autoclaved in wet medium and randomly divided into 5 groups (), according to the preparation methods employed—control group: no solutions applied; group 1: cement removal and irrigation with 5.25% % EDTA for 4 minutes each; group 2: 17%  % NaOCl (4 minutes ultrasonic bath); group 3: cement removal and 17%     buffer solution + distilled water (10 minutes ultrasonic); group 4: 17%   NaOCl (3 minutes ultrasonic bath). Specimens were analyzed by field emission scanning electron microscope (FE-SEM), at 1500x magnification. Data were submitted to qualitative analysis according to a scoring system and submitted to Kruskal-Wallis test.Results. In ascending order, as to bind parameters, (i) cleanliness: control, group 2, group 3, group 5, and group 4, (ii) dentinal alterations: group 1, group 5, group 2, group 3, and group 4.Conclusion. The proposed protocol was suitable for subsequent microbiological contamination, because it showed less dentinal morphological alterations with increased removal of organic waste.

scholarly journals The Evaluation of Various Restoration Techniques on Internal Adaptation of Composites in Class V Cavities

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
D. Dionysopoulos ◽  
C. Papadopoulos ◽  
E. Koliniotou-Koumpia
Keyword(s):  
Room Temperature ◽  
Control Group ◽  
Class V ◽  
Group 4 ◽  
Restoration Techniques ◽  
Group 3 ◽  
Internal Adaptation ◽  
Group 5 ◽  
Group 2 ◽  
Group 1

Aim.The aim of this study was to evaluate the effect of different restoration techniques on the formation of internal microgaps between materials and dentin in class V restorations.Materials and Methods.Twenty-five extracted human premolars were prepared with standardized class V cavity outlines (3 mm × 2 mm × 2 mm). The cavities were randomly divided into 5 groups of 10 cavities each and restored according to manufacturer’s instructions: Group 1: preheating (55°C) conventional composite (Filtek Z250), Group 2: flowable composite (Filtek Flow), Group 3: Filtek Flow + Filtek Z250 light-cured separately, Group 4: Filtek Flow + Filtek Z250 light-cured simultaneously, and Group 5 (control): Filtek Z250 at room temperature (23°C). The specimens were then thermocycled and cross-sectioned through the center of the restoration. Subsequently, impressions were taken, and epoxy resin replicas were made. The internal adaptation of the materials to the axial wall was analyzed under SEM.Results.The preheated Filtek Z250 (Group 1) showed better internal adaptation than the room temperature groups(P<0.05). The combination of Filtek Flow with Filtek Z250 which was light-cured separately (Group 3) exhibited better internal adaptation than control group(P<0.05).Conclusion.Different restoration techniques exhibit different behavior regarding internal adaptation to dentin after photopolymerization.

scholarly journals Effect of Different Finishing and Polishing Methods for Color Stability of the E-Max Dental Ceramics: In vitro Study

2021 ◽  
Vol 14 (4) ◽  
pp. 1508-1513
Author(s):  
Ibraheem F Alshiddi
Keyword(s):  
Surface Brightness ◽  
Color Stability ◽  
Color Measurement ◽  
Control Group ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

In order to assess the influence of finishing and polishing on the surface brightness and color stability of the ceramic veneer, fifty specimens were fabricated with 10 mm diameter and 2 mm thickness using IPS E-Max Ceramic. After glazing, 10 specimens were untouched as control group, and the other 40 specimens were abraded using 125µm diamond bur to create surface roughness. Forty specimens were divided into four groups (n=10), in group 1: specimens were finished using diamond point, in group 2 specimens’ surface was polished with a polishing kit, Group 3: Each specimen surface was polished with the polishing kit as in protocol 2 and was polished a polishing past and group 4 Each specimen was glazed by heating at 621℃ for 3 minutes followed by a temperature increase of 83℃/min up to 918℃ for 30 seconds. Color measurement was performed using spectrophotometer. Color stability data were analyzed using two-way ANOVA and Tukey’s HSD test (α=0.05). For Ra values, paired-samples t-tests were used to analyze the data and compare groups. The change in L and E showed a significant difference among the study groups; (group 1, group 2, group 3 and group 4) with respect to three variables L, a and b. A significant difference was noted when compared each group with the control; however, only group 2 showed a significant difference from group 4; the remaining groups demonstrated similar findings for all three variables. The study displayed a significant impact of the finishing and polishing technique on the surface brightness and color stability of ceramic restoration. However, it was evident that combination of two or three polishing techniques which includes polish kit and glaze enhances the surface finish and adds color stability by alternating the yellow – blue axis (increase in b) and red- green axis (decrease in a).

Sign in / Sign up

Export Citation Format

Share Document