scholarly journals Supplementary material to "The Zugspitze radiative closure experiment for quantifying water vapor absorption over the terrestrial and solar infrared. Part III: Quantification of the near-infrared water vapor continuum under atmospheric conditions"

Author(s):  
Andreas Reichert ◽  
Ralf Sussmann
2016 ◽  
Vol 16 (18) ◽  
pp. 11671-11686 ◽  
Author(s):  
Andreas Reichert ◽  
Ralf Sussmann

Abstract. We present a first quantification of the near-infrared (NIR) water vapor continuum absorption from an atmospheric radiative closure experiment carried out at the Zugspitze (47.42° N, 10.98° E; 2964 m a.s.l.). Continuum quantification is achieved via radiative closure using radiometrically calibrated solar Fourier transform infrared (FTIR) absorption spectra covering the 2500 to 7800 cm−1 spectral range. The dry atmospheric conditions at the Zugspitze site (IWV 1.4 to 3.3 mm) enable continuum quantification even within water vapor absorption bands, while upper limits for continuum absorption can be provided in the centers of window regions. Throughout 75 % of the 2500 to 7800 cm−1 spectral range, the Zugspitze results agree within our estimated uncertainty with the widely used MT_CKD 2.5.2 model (Mlawer et al., 2012). In the wings of water vapor absorption bands, our measurements indicate about 2–5 times stronger continuum absorption than MT_CKD, namely in the 2800 to 3000 cm−1 and 4100 to 4200 cm−1 spectral ranges. The measurements are consistent with the laboratory measurements of Mondelain et al. (2015), which rely on cavity ring-down spectroscopy (CDRS), and the calorimetric–interferometric measurements of Bicknell et al. (2006). Compared to the recent FTIR laboratory studies of Ptashnik et al. (2012, 2013), our measurements are consistent within the estimated errors throughout most of the spectral range. However, in the wings of water vapor absorption bands our measurements indicate typically 2–3 times weaker continuum absorption under atmospheric conditions, namely in the 3200 to 3400, 4050 to 4200, and 6950 to 7050 cm−1 spectral regions.


2016 ◽  
Author(s):  
Andreas Reichert ◽  
Ralf Sussmann

Abstract. We present a first quantification of the near-infrared (NIR) water vapor continuum absorption from an atmospheric radiative closure experiment carried out at Mt. Zugspitze (47.42° N, 10.98° E, 2964 m a.s.l.). Continuum quantification is achieved via radiative closure using radiometrically calibrated solar FTIR absorption spectra covering the 2500 to 7800 cm−1 spectral range. The dry atmospheric conditions at the Zugspitze site (IWV 1.4 to 3.3 mm) enable continuum quantification even within water vapor absorption bands, while upper limits for continuum absorption can be provided in the centers of window regions. Throughout 75 % of the 2500 to 7800 cm−1 spectral range, the Zugspitze results are agree within our estimated uncertainty with the widely used MT_CKD 2.5.2-model (Mlawer et al., 2012). Notable exceptions are the 2800 to 3000 cm−1 and 4100 to 4200 cm−1 spectral ranges, where our measurements indicate about 5 times stronger continuum absorption than MT_CKD. The measurements are consistent with the laboratory measurements of Mondelain et al. (2015), which rely on cavity ring-down spectroscopy (CDRS), and the calorimetric-interferometric measurements of Bicknell et al. (2006). Compared to the recent FTIR laboratory studies of Ptashnik et al. (2012) and (2013), our measurements indicate 2–5 times weaker continuum absorption under atmospheric conditions in the wings of water vapor absorption bands, namely in the 3200 to 3400 cm−1, 4050 to 4200 cm−1, and 6950 to 7050 cm−1 spectral regions.


2016 ◽  
Vol 9 (4) ◽  
pp. 1743-1753 ◽  
Author(s):  
Kerry Meyer ◽  
Steven Platnick ◽  
G. Thomas Arnold ◽  
Robert E. Holz ◽  
Paolo Veglio ◽  
...  

Abstract. Previous bi-spectral imager retrievals of cloud optical thickness (COT) and effective particle radius (CER) based on the Nakajima and King (1990) approach, such as those of the operational MODIS cloud optical property retrieval product (MOD06), have typically paired a non-absorbing visible or near-infrared wavelength, sensitive to COT, with an absorbing shortwave or mid-wave infrared wavelength sensitive to CER. However, in practice it is only necessary to select two spectral channels that exhibit a strong contrast in cloud particle absorption. Here it is shown, using eMAS observations obtained during NASA's SEAC4RS field campaign, that selecting two absorbing wavelength channels within the broader 1.88 µm water vapor absorption band, namely the 1.83 and 1.93 µm channels that have sufficient differences in ice crystal single scattering albedo, can yield COT and CER retrievals for thin to moderately thick single-layer cirrus that are reasonably consistent with other solar and IR imager-based and lidar-based retrievals. A distinct advantage of this channel selection for cirrus cloud retrievals is that the below-cloud water vapor absorption minimizes the surface contribution to measured cloudy top-of-atmosphere reflectance, in particular compared to the solar window channels used in heritage retrievals such as MOD06. This reduces retrieval uncertainty resulting from errors in the surface reflectance assumption and reduces the frequency of retrieval failures for thin cirrus clouds.


2016 ◽  
Author(s):  
K. Meyer ◽  
S. Platnick ◽  
G. T. Arnold ◽  
R. E. Holz ◽  
P. Veglio ◽  
...  

Abstract. Previous bi-spectral imager retrievals of cloud optical thickness (COT) and effective particle radius (CER) based on the Nakajima and King (1990) approach, such as those of the operational MODIS cloud optical property retrieval product (MOD06), have typically paired a non-absorbing visible or near-infrared wavelength, sensitive to COT, with an absorbing shortwave or midwave infrared wavelength sensitive to CER. However, in practice it is only necessary to select two spectral channels that exhibit a strong contrast in cloud particle absorption. Here it is shown, using eMAS observations obtained during NASA's SEAC4RS field campaign, that selecting two absorbing wavelength channels within the broader 1.88 μm water vapor absorption band, namely the 1.83 and 1.93 μm channels that have sufficient differences in ice crystal single scattering albedo, can yield COT and CER retrievals for thin to moderately thick single-layer cirrus that are reasonably consistent with other solar and IR imager-based and lidar-based retrievals. A distinct advantage of this channel selection for cirrus cloud retrievals is that the surface contribution to measured cloudy TOA reflectance is minimized due to below-cloud water vapor absorption, thus reducing retrieval uncertainty resulting from errors in the surface reflectance assumption, as well as reducing the frequency of retrieval failures for thin cirrus clouds.


1981 ◽  
Vol 103 (3) ◽  
pp. 182-192 ◽  
Author(s):  
R. E. Bird ◽  
R. L. Hulstrom

A study was performed to: (1) define the relative significance of the various atmospheric constituents to the depletion of the direct solar beam irradiance; (2) compare and evaluate several simple models versus a complex SOLTRAN-model; and (3) develop an improved, easy to use model. The results indicate that for a reasonable range of atmospheric conditions the broadband direct beam energy is attenuated by atmospheric constituents in the following order: aerosols attenuate the most; molecular scattering is next in importance; and water vapor absorption is third. Attenuation by O3, O2, and CO2 is minor. The total irradiance from various models agree to within ±10 percent at small zenith angles, but diverge significantly at large zenith angles.


2018 ◽  
Vol 176 ◽  
pp. 01027
Author(s):  
H. Vogelmann ◽  
T. Trickl ◽  
M . Perfahl ◽  
S. Biggel

Recently, we quantified the very high spatio-temporal short term variability of tropospheric water vapor in a three dimensional study [1]. From a technical point of view this also depicted the general requirement of short integration times for recording water-vapor profiles with lidar. For this purpose, the only suitable technique is the differential absorption lidar (DIAL) working in the near-infrared (NIR) spectral region. The laser emission of most water vapor DIAL systems is generated by Ti:sapphire or alexandrite lasers. The water vapor absorption band at 817 nm is predominated for the use of Ti:sapphire. We present a new concept of transversely pumping in a Ti:Sapphire amplification stage as well as a compact laser design for the generation of single mode NIR pulses with two different DIAL wavelengths inside a single resonator. This laser concept allows for high output power due to repetitions rates up to 100Hz or even more. It is, because of its compactness, also suitable for mobile applications.


Sign in / Sign up

Export Citation Format

Share Document