scholarly journals Ground-based Investigation of HO<sub>x</sub> and Ozone Chemistry in Biomass Burning Plumes in Rural Idaho

2021 ◽  
Author(s):  
Andrew J. Lindsay ◽  
Daniel C. Anderson ◽  
Rebecca A. Wernis ◽  
Yutong Liang ◽  
Allen H. Goldstein ◽  
...  
Keyword(s):  
Biomass Burning ◽  
Nitrous Acid ◽  
Peroxy Radical ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Trace Gas ◽  
Radical Species ◽  
Smoke Plumes ◽  
Secondary Pollutants ◽  
Master Chemical Mechanism

Abstract. Ozone (O3), a potent greenhouse gas that is detrimental to human health, is typically found in elevated concentrations within biomass burning (BB) smoke plumes. The radical species OH, HO2, and RO2 (known collectively as ROx) have central roles in the formation of secondary pollutants including O3 but are poorly characterized for BB plumes. We present measurements of total peroxy radical concentrations ([XO2] ≡ [HO2] + [RO2]) and additional trace-gas and particulate matter measurements from McCall, Idaho during August 2018. There were five distinct periods in which BB smoke impacted this site. During BB events, O3 concentrations were enhanced as evidenced by ozone enhancement ratios (ΔO3/ ΔCO) that ranged up to 0.25 ppbv ppbv−1. [XO2] was similarly elevated during some BB events. Overall, quantified instantaneous ozone production rates (P(O3)) were only slightly impacted by the presence of smoke as NOx enhancements were minimal. Measured XO2 concentrations were compared to zero-dimensional box modeling results to evaluate the effectiveness of the Master Chemical Mechanism (MCM) and GEOS-Chem mechanisms during periods of BB influence and overall agreed within 31 %. One period of BB influence had distinct measured enhancements of 15 pptv XO2 that were not reflected in the model output, likely due to the presence of an unmeasured HOx source, quite likely nitrous acid (HONO). To our knowledge, this is the first BB study featuring peroxy radical measurements.

scholarly journals The MCM v3.3 degradation scheme for isoprene

2015 ◽  
Vol 15 (6) ◽  
pp. 9709-9766 ◽  
Author(s):  
M. E. Jenkin ◽  
J. C. Young ◽  
A. R. Rickard
Keyword(s):  
Boundary Layer ◽  
Free Radical ◽  
Degradation Mechanism ◽  
Closed Shell ◽  
Chemical Mechanism ◽  
Formation Mechanisms ◽  
Oh Radicals ◽  
Atmospheric Conditions ◽  
Radical Species ◽  
Master Chemical Mechanism

Abstract. The chemistry of isoprene degradation in the Master Chemical Mechanism (MCM) has been systematically refined and updated to reflect recent advances in understanding, with these updates appearing in the latest version, MCM v3.3. The complete isoprene degradation mechanism in MCM v3.3 consists of 1935 reactions of 605 closed shell and free radical species, which treat the chemistry initiated by reaction with OH radicals, NO3 radicals and ozone (O3). A detailed overview of the updates is provided, within the context of reported kinetic and mechanistic information. The revisions mainly relate to the OH-initiated chemistry, which tends to dominate under atmospheric conditions, although these include updates to the chemistry of some products that are also generated from the O3 - and NO3-initiated oxidation. The revisions have impacts in a number of key areas, including HOx recycling, NOx recycling and the formation of species reported to play a role in SOA-formation mechanisms. The performance of the MCM v3.3 isoprene mechanism has been compared with those of earlier versions (MCM v3.1 and MCM v3.2) over a range of relevant conditions, using a box model of the tropical forested boundary layer. The results of these calculations are presented and discussed, and are used to illustrate the impacts of the mechanistic updates in MCM v3.3.

scholarly journals Peroxy radical chemistry and the control of ozone photochemistry at Mace Head, Ireland during the summer of 2002

2006 ◽  
Vol 6 (8) ◽  
pp. 2193-2214 ◽  
Author(s):  
Z. L. Fleming ◽  
P. S. Monks ◽  
A. R. Rickard ◽  
D. E. Heard ◽  
W. J. Bloss ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Production Rate ◽  
Marine Boundary Layer ◽  
Strong Dependence ◽  
Peroxy Radical ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Night Time ◽  
Model Measurement

Abstract. Peroxy radical (HO2+ΣRO2) measurements, using the PEroxy Radical Chemical Amplification (PERCA) technique at the North Atlantic Marine Boundary Layer EXperiment (NAMBLEX) at Mace Head in summer 2002, are presented and put into the context of marine, boundary-layer chemistry. A suite of other chemical parameters (NO, NO2, NO3, CO, CH4, O3, VOCs, peroxides), photolysis frequencies and meteorological measurements, are used to present a detailed analysis of the role of peroxy radicals in tropospheric oxidation cycles and ozone formation. Under the range of conditions encountered the peroxy radical daily maxima varied from 10 to 40 pptv. The diurnal cycles showed an asymmetric shape typically shifted to the afternoon. Using a box model based on the master chemical mechanism the average model measurement agreement was 2.5 across the campaign. The addition of halogen oxides to the model increases the level of model/measurement agreement, apparently by respeciation of HOx. A good correlation exists between j(HCHO).[HCHO] and the peroxy radicals indicative of the importance of HCHO in the remote atmosphere as a HOx source, particularly in the afternoon. The peroxy radicals showed a strong dependence on [NO2] with a break point at 0.1 ppbv, where the radicals increased concomitantly with the reactive VOC loading, this is a lower value than seen at representative urban campaigns. The HO2/(HO2+ΣRO2) ratios are dependent on [NOx] ranging between 0.2 and 0.6, with the ratio increasing linearly with NOx. Significant night-time levels of peroxy radicals were measured up to 25 pptv. The contribution of ozone-alkenes and NO3-alkene chemistry to night-time peroxy radical production was shown to be on average 59 and 41%. The campaign mean net ozone production rate was 0.11±0.3 ppbv h-1. The ozone production rate was strongly dependent on [NO] having linear sensitivity (dln(P(O3))/dln(NO)=1.0). The results imply that the N(O3) (the in-situ net photochemical rate of ozone production/destruction) will be strongly sensitive in the marine boundary layer to small changes in [NO] which has ramifications for changing NOx loadings in the European continental boundary layer.

scholarly journals Atmospheric OH reactivity in central London: observations, model predictions and estimates of in situ ozone production

2015 ◽  
Vol 15 (21) ◽  
pp. 31247-31286
Author(s):  
L. K. Whalley ◽  
D. Stone ◽  
B. Bandy ◽  
R. Dunmore ◽  
J. F. Hamilton ◽  
...  
Keyword(s):  
Degradation Mechanism ◽  
Oxidation Products ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Two Dimensional ◽  
Diurnal Profile ◽  
Biogenic Compounds ◽  
Master Chemical Mechanism ◽  
The Difference

Abstract. Near-continuous measurements of OH reactivity in the urban background atmosphere of central London during the summer of 2012 are presented. OH reactivity behaviour is seen to be broadly dependent on airmass origin with the highest reactivity and the most pronounced diurnal profile observed when air had passed over central London to the East, prior to measurement. Averaged over the entire observation period of 26 days, OH reactivity peaked at ~ 27 s−1 in the morning with a minimum of ~ 15 s−1 during the afternoon. A maximum OH reactivity of 116 s−1 was recorded on one day during morning rush hour. A detailed box model using the Master Chemical Mechanism was used to calculate OH reactivity, and was constrained with an extended measurement dataset of volatile organic compounds (VOCs) derived from GC-FID and a two-dimensional GC instrument which included heavier molecular weight (up to C12) aliphatic VOCs, oxygenated VOCs and the biogenic VOCs of α pinene and limonene. Comparison was made between observed OH reactivity and modelled OH reactivity using (i) a standard suite of VOC measurements (C2-C8 hydrocarbons and a small selection of oxygenated VOCs) and (ii) a more comprehensive inventory including species up to C12. Modelled reactivities were lower than those measured (by 33 %) when only the reactivity of the standard VOC suite was considered. The difference between measured and modelled reactivity was improved, to within 15 %, if the reactivity of the higher VOCs (&amp;geq; C9) was also considered, with the reactivity of the biogenic compounds of α pinene and limonene and their oxidation products almost entirely responsible for this improvement. Further improvements in the model's ability to reproduce OH reactivity (to within 6 %) could be achieved if the reactivity and degradation mechanism of unassigned two-dimensional GC peaks were estimated. Neglecting the contribution of the higher VOCs (&amp;geq; C9) (particularly α pinene and limonene) and model-generated intermediates worsened the agreement between modelled and observed OH concentrations (by 41 %) and the magnitude of in situ ozone production calculated from the production of RO2 was significantly lower (60 %). This work highlights that any future ozone abatement strategies should consider the role that biogenic emissions play alongside anthropogenic emissions in influencing London's air quality.

scholarly journals Modelling of the photooxidation of toluene: conceptual ideas for validating detailed mechanisms

2003 ◽  
Vol 3 (1) ◽  
pp. 89-106 ◽  
Author(s):  
V. Wagner ◽  
M. E. Jenkin ◽  
S. M. Saunders ◽  
J. Stanton ◽  
K Wirtz ◽  
...  
Keyword(s):  
First Generation ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Reaction Systems ◽  
Master Chemical Mechanism ◽  
Reactive Nitrogen Oxides ◽  
Toluene Photooxidation ◽  
Radical Transformation ◽  
Validation Experiments

Abstract. Toluene photooxidation is chosen as an example to examine how simulations of smog-chamber experiments can be used to unravel shortcomings in detailed mechanisms and to provide information on complex reaction systems that will be crucial for the design of future validation experiments. The mechanism used in this study is extracted from the Master Chemical Mechanism Version 3 (MCM v3) and has been updated with new modules for cresol and g-dicarbonyl chemistry. Model simulations are carried out for a toluene-NOx experiment undertaken at the European Photoreactor (EUPHORE). The comparison of the simulation with the experimental data reveals two fundamental shortcomings in the mechanism: OH production is too low by about 80%, and the ozone concentration at the end of the experiment is over-predicted by 55%. The radical budget was analysed to identify the key intermediates governing the radical transformation in the toluene system. Ring-opening products, particularly conjugated g-dicarbonyls, were identified as dominant radical sources in the early stages of the experiment. The analysis of the time evolution of radical production points to a missing OH source that peaks when the system reaches highest reactivity. First generation products are also of major importance for the ozone production in the system. The analysis of the radical budget suggests two options to explain the concurrent under-prediction of OH and over-prediction of ozone in the model: 1) missing oxidation processes that produce or regenerate OH without or with little NO to NO2 conversion or 2) NO3 chemistry that sequesters reactive nitrogen oxides into stable nitrogen compounds and at the same time produces peroxy radicals. Sensitivity analysis was employed to identify significant contributors to ozone production and it is shown how this technique, in combination with ozone isopleth plots, can be used for the design of validation experiments.

scholarly journals The MCM v3.3.1 degradation scheme for isoprene

2015 ◽  
Vol 15 (20) ◽  
pp. 11433-11459 ◽  
Author(s):  
M. E. Jenkin ◽  
J. C. Young ◽  
A. R. Rickard
Keyword(s):  
Degradation Mechanism ◽  
Closed Shell ◽  
Organic Aerosol ◽  
Chemical Mechanism ◽  
Formation Mechanisms ◽  
Oh Radicals ◽  
Atmospheric Conditions ◽  
Aerosol Formation ◽  
Radical Species ◽  
Master Chemical Mechanism

Abstract. The chemistry of isoprene degradation in the Master Chemical Mechanism (MCM) has been systematically refined and updated to reflect recent advances in understanding, with these updates appearing in the latest version, MCM v3.3.1. The complete isoprene degradation mechanism in MCM v3.3.1 consists of 1926 reactions of 602 closed shell and free radical species, which treat the chemistry initiated by reaction with OH radicals, NO3 radicals and ozone (O3). A detailed overview of the updates is provided, within the context of reported kinetic and mechanistic information. The revisions mainly relate to the OH-initiated chemistry, which tends to dominate under atmospheric conditions, although these include updates to the chemistry of some products that are also generated from the O3- and NO3-initiated oxidation. The revisions have impacts in a number of key areas, including HOx recycling, NOx recycling and the formation of species reported to play a role in SOA (secondary organic aerosol)-formation mechanisms. The performance of the MCM v3.3.1 isoprene mechanism has been compared with those of earlier versions (MCM v3.1 and MCM v3.2) over a range of relevant conditions, using a box model of the tropical forested boundary layer. The results of these calculations are presented and discussed and are used to illustrate the impacts of the mechanistic updates in MCM v3.3.1.

scholarly journals Free radical modelling studies during the UK TORCH Campaign in Summer 2003

2007 ◽  
Vol 7 (1) ◽  
pp. 167-181 ◽  
Author(s):  
K. M. Emmerson ◽  
N. Carslaw ◽  
D. C. Carslaw ◽  
J. D. Lee ◽  
G. McFiggans ◽  
...  
Keyword(s):  
Hydroxyl Radical ◽  
Atmospheric Chemistry ◽  
Model Performance ◽  
Peroxy Radical ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
North East ◽  
Hydroperoxy Radical ◽  
Modelling Studies

Abstract. The Tropospheric ORganic CHemistry experiment (TORCH) took place during the heatwave of summer 2003 at Writtle College, a site 2 miles west of Chelmsford in Essex and 25 miles north east of London. The experiment was one of the most highly instrumented to date. A combination of a large number of days of simultaneous, collocated measurements, a consequent wealth of model constraints and a highly detailed chemical mechanism, allowed the atmospheric chemistry of this site to be studied in detail. Between 25 July and 31 August, the concentrations of the hydroxyl radical and the hydroperoxy radical were measured using laser-induced fluorescence at low pressure and the sum of peroxy radicals was measured using the peroxy radical chemical amplifier technique. The concentrations of the radical species were predicted using a zero-dimensional box model based on the Master Chemical Mechanism version 3.1, which was constrained with the observed concentrations of relatively long-lived species. The model included a detailed parameterisation to account for heterogeneous loss of hydroperoxy radicals onto aerosol particles. Quantile-quantile plots were used to assess the model performance in respect of the measured radical concentrations. On average, measured hydroxyl radical concentrations were over-predicted by 24%. Modelled and measured hydroperoxy radical concentrations agreed very well, with the model over-predicting on average by only 7%. The sum of peroxy radicals was under-predicted when compared with the respective measurements by 22%. Initiation via OH was dominated by the reactions of excited oxygen atoms with water, nitrous acid photolysis and the ozone reaction with alkene species. Photolysis of aldehyde species was the main route for initiation via HO2 and RO2. Termination, under all conditions, primarily involved reactions with NOx for OH and heterogeneous chemistry on aerosol surfaces for HO2. The OH chain length varied between 2 and 8 cycles, the longer chain lengths occurring before and after the most polluted part of the campaign. Peak local ozone production of 17 ppb hr−1 occurred on 3 and 5 August, signifying the importance of local chemical processes to ozone production on these days. On the whole, agreement between model and measured radicals is good, giving confidence that our understanding of atmospheres influenced by nearby urban sources is adequate.

scholarly journals Peroxy radical chemistry and the control of ozone photochemistry at Mace Head, Ireland during the summer of 2002

2005 ◽  
Vol 5 (6) ◽  
pp. 12313-12371 ◽  
Author(s):  
Z. L. Fleming ◽  
P. S. Monks ◽  
A. R. Rickard ◽  
D. E. Heard ◽  
W. J. Bloss ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Production Rate ◽  
Marine Boundary Layer ◽  
Strong Dependence ◽  
Peroxy Radical ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Night Time ◽  
Model Measurement

Abstract. Peroxy radical (HO2+ΣRO2) measurements, using the PEroxy Radical Chemical Amplification (PERCA) technique at the North Atlantic Marine Boundary Layer EXperiment (NAMBLEX) at Mace Head in summer 2002, are presented and put into the context of marine, boundary-layer chemistry. A suite of other chemical parameters (NO, NO2, NO3, CO, CH4, O3, VOCs, peroxides), photolysis frequencies and meteorological measurements, are used to present a detailed analysis of the role of peroxy radicals in tropospheric oxidation cycles and ozone formation. Under the range of conditions encountered the peroxy radical daily maxima varied from 10 to 40 pptv. The diurnal cycles showed an asymmetric shape typically shifted to the afternoon. Using a box model based on the master chemical mechanism the average model measurement agreement was 2.5 across the campaign. The addition of halogen oxides to the model increases the level of model/measurement agreement, apparently by respeciation of HOx. A good correlation exists between j(HCHO).[HCHO] and the peroxy radicals indicative of the importance of HCHO in the remote atmosphere as a HOx source, particularly in the afternoon. The peroxy radicals showed a strong dependence on [NOx] with a break point at 0.1 ppbv, where the radicals increased concomitantly with the reactive VOC loading, this is a lower value than seen at representative urban campaigns. The HO2/(HO2+ΣRO2) ratios are dependent on [NOx] ranging between 0.2 and 0.6, with the ratio increasing linearly with NOx. Significant night-time levels of peroxy radicals were measured up to 25 pptv. The contribution of ozone-alkenes and NO3-alkene chemistry to night-time peroxy radical production was shown to be on average 59 and 41%. The campaign mean net ozone production rate was 0.11±0.3 ppbv h−1. The ozone production rate was strongly dependent on [NO] having linear sensitivity (dln(P(O3))/dln(NO)=1.0). The results imply that the N(O3) (the in-situ net photochemical rate of ozone production/destruction) will be strongly sensitive in the marine boundary layer to small changes in [NO] which has ramifications for changing NOx loadings in the European continental boundary layer.

scholarly journals Boreal forest fire emissions in fresh Canadian smoke plumes: C<sub>1</sub>-C<sub>10</sub> volatile organic compounds (VOCs), CO<sub>2</sub>, CO, NO<sub>2</sub>, NO, HCN and CH<sub>3</sub>CN

2011 ◽  
Vol 11 (13) ◽  
pp. 6445-6463 ◽  
Author(s):  
I. J. Simpson ◽  
S. K. Akagi ◽  
B. Barletta ◽  
N. J. Blake ◽  
Y. Choi ◽  
...  
Keyword(s):  
Boreal Forest ◽  
Organic Compounds ◽  
Biomass Burning ◽  
Forest Fires ◽  
Trace Gas ◽  
Air Samples ◽  
Fire Emissions ◽  
Trace Gas Emissions ◽  
Smoke Plumes ◽  
Volatile Organic

Abstract. Boreal regions comprise about 17 % of the global land area, and they both affect and are influenced by climate change. To better understand boreal forest fire emissions and plume evolution, 947 whole air samples were collected aboard the NASA DC-8 research aircraft in summer 2008 as part of the ARCTAS-B field mission, and analyzed for 79 non-methane volatile organic compounds (NMVOCs) using gas chromatography. Together with simultaneous measurements of CO2, CO, CH4, CH2O, NO2, NO, HCN and CH3CN, these measurements represent the most comprehensive assessment of trace gas emissions from boreal forest fires to date. Based on 105 air samples collected in fresh Canadian smoke plumes, 57 of the 80 measured NMVOCs (including CH2O) were emitted from the fires, including 45 species that were quantified from boreal forest fires for the first time. After CO2, CO and CH4, the largest emission factors (EFs) for individual species were formaldehyde (2.1 ± 0.2 g kg−1), followed by methanol, NO2, HCN, ethene, α-pinene, β-pinene, ethane, benzene, propene, acetone and CH3CN. Globally, we estimate that boreal forest fires release 2.4 ± 0.6 Tg C yr−1 in the form of NMVOCs, with approximately 41 % of the carbon released as C1-C2 NMVOCs and 21 % as pinenes. These are the first reported field measurements of monoterpene emissions from boreal forest fires, and we speculate that the pinenes, which are relatively heavy molecules, were detected in the fire plumes as the result of distillation of stored terpenes as the vegetation is heated. Their inclusion in smoke chemistry models is expected to improve model predictions of secondary organic aerosol (SOA) formation. The fire-averaged EF of dichloromethane or CH2Cl2, (6.9 ± 8.6) × 10−4 g kg−1, was not significantly different from zero and supports recent findings that its global biomass burning source appears to have been overestimated. Similarly, we found no evidence for emissions of chloroform (CHCl3) or methyl chloroform (CH3CCl3) from boreal forest fires. The speciated hydrocarbon measurements presented here show the importance of carbon released by short-chain NMVOCs, the strong contribution of pinene emissions from boreal forest fires, and the wide range of compound classes in the most abundantly emitted NMVOCs, all of which can be used to improve biomass burning inventories in local/global models and reduce uncertainties in model estimates of trace gas emissions and their impact on the atmosphere.

scholarly journals Understanding in situ ozone production in the summertime through radical observations and modelling studies during the Clean air for London project (ClearfLo)

2017 ◽  
Author(s):  
Lisa K. Whalley ◽  
Daniel Stone ◽  
Rachel Dunmore ◽  
Jacqueline Hamilton ◽  
James R. Hopkins ◽  
...  
Keyword(s):  
Peroxy Radical ◽  
Box Model ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Sink Term ◽  
Modelling Studies ◽  
Order Of Magnitude ◽  
Clean Air

Abstract. Measurements of OH, HO2, RO2i (alkene and aromatic related RO2) and total RO2 radicals taken during the ClearfLo campaign in central London in the summer of 2012 are presented. A photostationary steady-state calculation of OH which considered measured OH reactivity as the OH sink term and the measured OH sources (of which HO2+NO reaction and HONO photolysis dominated) compared well with the observed levels of OH. Comparison with calculations from a detailed box model utilising the Master Chemical Mechanism v3.2, however, highlighted a substantial discrepancy between radical observations under lower NOx conditions ([NO]  3 ppbv) the box model increasingly under-predicted total [RO2]. The modelled and observed HO2 were in agreement, however, under elevated NO concentrations ranging from 7–15 ppbv. The model uncertainty under low NO conditions leads to more ozone production predicted using modelled peroxy radical concentrations (~ 3 ppbv hr−1) versus ozone production from peroxy radicals measured (~ 1 ppbv hr−1). Conversely, ozone production derived from the predicted peroxy radicals is up to an order of magnitude lower than from the observed peroxy radicals as [NO] increases beyond 7 ppbv due to the model under-prediction of RO2 under these conditions.

scholarly journals Measurement of isoprene nitrates by GCMS

2016 ◽  
Vol 9 (9) ◽  
pp. 4533-4545 ◽  
Author(s):  
Graham P. Mills ◽  
Glyn D. Hiatt-Gipson ◽  
Sean P. Bew ◽  
Claire E. Reeves
Keyword(s):  
Atmospheric Chemistry ◽  
Production Efficiency ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Gas Chromatography Mass Spectrometry ◽  
Nitrate Radical ◽  
Calibration Methods ◽  
Isoprene Nitrates ◽  
Ambient Concentrations ◽  
Master Chemical Mechanism

Abstract. According to atmospheric chemistry models, isoprene nitrates play an important role in determining the ozone production efficiency of isoprene; however this is very poorly constrained through observations as isoprene nitrates have not been widely measured. Measurements have been severely restricted largely due to a limited ability to measure individual isoprene nitrate isomers. An instrument based on gas chromatography/mass spectrometry (GCMS) and the associated calibration methods are described for the speciated measurements of individual isoprene nitrate isomers. Five of the primary isoprene nitrates which formed in the presence of NOx by reaction of isoprene with the hydroxyl radical (OH) in the Master Chemical Mechanism are identified using known isomers on two column phases and are fully separated on the Rtx-200 column. Three primary isoprene nitrates from the reaction of isoprene with the nitrate radical (NO3) are identified after synthesis from the already identified analogous hydroxy nitrate. A Tenax adsorbent-based trapping system allows the analysis of the majority of the known hydroxy and carbonyl primary isoprene nitrates, although not the (1,2)-IN isomer, under field-like levels of humidity and showed no impact from typical ambient concentrations of NOx and ozone.

Sign in / Sign up

Export Citation Format

Share Document