scholarly journals Use of criteria pollutants, active and passive mercury sampling, and receptor modeling to understand the chemical forms of gaseous oxidized mercury in Florida

2015 ◽  
Vol 15 (8) ◽  
pp. 12069-12105 ◽  
Author(s):  
J. Huang ◽  
M. B. Miller ◽  
E. Edgerton ◽  
M. S. Gustin

Abstract. The highest mercury (Hg) wet deposition in the United States (US) occurs along the Gulf of Mexico, and in the southern and central Mississippi River Valley. Gaseous oxidized Hg (GOM) is thought to be a major contributor due to its high water solubility and reactivity. Therefore, it is critical to understand the concentrations, potential for wet and dry deposition, and GOM compounds present in the air. Concentrations and dry deposition fluxes of GOM were measured at Outlying Landing Field (OLF), Florida, using a Tekran® 2537/1130/1135, and active and passive samplers using cation-exchange and nylon membranes. Relationships with Tekran® derived data must be interpreted with caution, since GOM concentrations can be biased low depending on the chemical compounds in air, and interferences with water vapor and ozone. Only gaseous elemental Hg and GOM are discussed here since the PBM measurement uncertainties are higher. Criteria air pollutants were concurrently measured and Tekran® data were assessed along with these using Principal Component Analysis to identify associations among air pollutants. Based on the diel pattern, high GOM concentrations at this site were associated with fossil fuel combustion and gas phase oxidation during the day, and gas phase oxidation and transport in the free troposphere. The ratio of GEM/CO at OLF (0.008 ng m−3 ppbv−1) was much higher than the numbers reported for the Western United States and central New York for domestic emissions or biomass burning (0.001 ng m−3 ppbv−1), which we suggest is indicative of a marine boundary layer source. Results from nylon membranes with thermal desorption analyses suggest five potential GOM compounds exist in this area, including HgBr2, HgO, Hg(NO3)2, HgSO4, and an unknown compound. This indicates that the site is influenced by different gaseous phase reactions and sources. A~high GOM event related to high CO but average SO2 suggests the air parcels moved from the free troposphere and across Arkansas, Mississippi, and Alabama at low elevation (< 300 m) using back trajectory analysis. We hypothesize this is due to subsidence of Hg containing air from the free troposphere. It is difficult to fully understand GOM dry deposition processes without knowing the actual GOM compounds, and their corresponding physicochemical properties, such as the Henry's Law constant. Overall, measured GOM dry deposition at this site ranged from 4–23% of total Hg wet deposition. The Aerohead sampling system for dry deposition captures primarily GOM since it would only collect fine particulate bound Hg by way of diffusion.

2017 ◽  
Vol 348 ◽  
pp. 265-275 ◽  
Author(s):  
N. Alonso-Fagúndez ◽  
M. Ojeda ◽  
R. Mariscal ◽  
J.L.G. Fierro ◽  
M. López Granados

2011 ◽  
Vol 11 (21) ◽  
pp. 11055-11067 ◽  
Author(s):  
K. Salo ◽  
M. Hallquist ◽  
Å. M. Jonsson ◽  
H. Saathoff ◽  
K.-H. Naumann ◽  
...  

Abstract. The aim of this study was to investigate oxidation of SOA formed from ozonolysis of α-pinene and limonene by hydroxyl radicals. This paper focuses on changes of particle volatility, using a Volatility Tandem DMA (VTDMA) set-up, in order to explain and elucidate the mechanism behind atmospheric ageing of the organic aerosol. The experiments were conducted at the AIDA chamber facility of Karlsruhe Institute of Technology (KIT) in Karlsruhe and at the SAPHIR chamber of Forchungzentrum Jülich (FZJ) in Jülich. A fresh SOA was produced from ozonolysis of α-pinene or limonene and then aged by enhanced OH exposure. As an OH radical source in the AIDA-chamber the ozonolysis of tetramethylethylene (TME) was used while in the SAPHIR-chamber the OH was produced by natural light photochemistry. A general feature is that SOA produced from ozonolysis of α-pinene and limonene initially was rather volatile and becomes less volatile with time in the ozonolysis part of the experiment. Inducing OH chemistry or adding a new portion of precursors made the SOA more volatile due to addition of new semi-volatile material to the aged aerosol. The effect of OH chemistry was less pronounced in high concentration and low temperature experiments when lower relative amounts of semi-volatile material were available in the gas phase. Conclusions drawn from the changes in volatility were confirmed by comparison with the measured and modelled chemical composition of the aerosol phase. Three quantified products from the α-pinene oxidation; pinonic acid, pinic acid and methylbutanetricarboxylic acid (MBTCA) were used to probe the processes influencing aerosol volatility. A major conclusion from the work is that the OH induced ageing can be attributed to gas phase oxidation of products produced in the primary SOA formation process and that there was no indication on significant bulk or surface reactions. The presented results, thus, strongly emphasise the importance of gas phase oxidation of semi- or intermediate-volatile organic compounds (SVOC and IVOC) for atmospheric aerosol ageing.


1995 ◽  
Vol 34 (4) ◽  
pp. 1044-1059 ◽  
Author(s):  
Rune Lodeng ◽  
Odd A. Lindvaag ◽  
Paal Soraker ◽  
Per T. Roterud ◽  
Olav T. Onsager

2008 ◽  
Vol 112 (48) ◽  
pp. 19102-19112 ◽  
Author(s):  
K. Bhattacharyya ◽  
S. Varma ◽  
A. K. Tripathi ◽  
S. R. Bharadwaj ◽  
A. K. Tyagi

Sign in / Sign up

Export Citation Format

Share Document