scholarly journals Validation of SCIAMACHY top-of-atmosphere reflectance for aerosol remote sensing using MERIS L1 data

2006 ◽  
Vol 6 (1) ◽  
pp. 673-699 ◽  
Author(s):  
W. von Hoyningen-Huene ◽  
A. A. Kokhanovsky ◽  
M. W. Wuttke ◽  
M. Buchwitz ◽  
S. Noël ◽  
...  

Abstract. Aerosol remote sensing is very much dependent on the quite accurate knowledge of the top-of-atmosphere (TOA) reflectance retrieved by a particular instrument. The status of the calibration of such an instrument thus is reflected in the quality of the aerosol retrieval. Currently the SCIAMACHY (SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY) instrument gives too low values of the TOA reflectance, compared e.g. to data from MERIS (Medium Resolution Imaging Spectrometer), both operating on ENVISAT (ENVIronmental SATellite), but the calibration of the operational L1 product of SCIAMACHY is not yet finished. From an inter-comparison of MERIS and SCIAMACHY TOA reflectance, for collocated scenes correction factors are derived to improve the current SCIAMACHY L1 data for the purpose of aerosol remote sensing. The corrected reflectance has been used for a first remote sensing of the aerosol optical thickness by the BAER (Bremen AErosol Retrieval) approach using SCIAMACHY data.

2007 ◽  
Vol 7 (1) ◽  
pp. 97-106 ◽  
Author(s):  
W. von Hoyningen-Huene ◽  
A. A. Kokhanovsky ◽  
M. W. Wuttke ◽  
M. Buchwitz ◽  
S. Noël ◽  
...  

Abstract. Aerosol remote sensing is very much dependent on the accurate knowledge of the top-of-atmosphere (TOA) reflectance measured by a particular instrument. The status of the calibration of such an instrument is reflected in the quality of the aerosol retrieval. Current data of the SCIAMACHY (SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY) instrument (operated with the data processor version 5 and earlier) give too small values of the TOA reflectance, compared e.g. to data from MERIS (Medium Resolution Imaging Spectrometer), both operating on ENVISAT (ENVIronmental SATellite). This effect causes retrievals of wrong aerosol optical thickness and disables the processing of aerosol parameters. From an inter-comparison of MERIS and SCIAMACHY TOA reflectance, for collocated scenes correction factors are derived to improve the insufficient SCIAMACHY L1 data calibration for data obtained with the processor 5 for the purpose of aerosol remote sensing. The corrected reflectance has been used for tests of remote sensing of the aerosol optical thickness by the BAER (Bremen AErosol Retrieval) approach using SCIAMACHY data.


2010 ◽  
Vol 3 (5) ◽  
pp. 4603-4644 ◽  
Author(s):  
C. Popp ◽  
P. Wang ◽  
D. Brunner ◽  
P. Stammes ◽  
Y. Zhou ◽  
...  

Abstract. A new global albedo climatology for Oxygen A-band cloud retrievals is presented. The climatology is based on MEdium Resolution Imaging Spectrometer (MERIS) Albedomap data and its favourable impact on the derivation of cloud fraction is demonstrated for the FRESCO+ (Fast Retrieval Scheme for Clouds from the Oxygen A-band) algorithm. To date, a relatively coarse resolution (1° × 1°) surface reflectance dataset from GOME (Global Ozone Monitoring Experiment) Lambert-equivalent reflectivity (LER) is used in FRESCO+. The GOME LER climatology does not account for the usually higher spatial resolution of UV/VIS instruments designed for trace gas remote sensing which introduces several artefacts, e.g. in regions with sharp spectral contrasts like coastlines or over bright surface targets. Therefore, MERIS black-sky albedo (BSA) data from the period October 2002 to October 2006 were aggregated to a grid of 0.25° × 0.25° for each month of the year and for different spectral channels. In contrary to other available surface reflectivity datasets, MERIS includes channels at 754 nm and 775 nm which are located close to the spectral windows required for O2 A-band cloud retrievals. The MERIS BSA in the near infrared compares well to Moderate Resolution Imaging Spectroradiometer (MODIS) derived BSA with an average difference lower than 1% and a correlation coefficient of 0.98. However, when relating MERIS BSA to GOME LER a distinctly lower correlation (0.80) and enhanced scatter is found. Effective cloud fractions from two exemplary months (January and July 2006) of Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY) data were subsequently derived with FRESCO+ and compared to those from the Heidelberg Iterative Cloud Retrieval Utilities (HICRU) algorithm. The MERIS climatology generally improves FRESCO+ effective cloud fractions. In particular small cloud fractions are in better agreement with HICRU. This is of importance for atmospheric trace gas retrieval which relies on accurate cloud information at small cloud fractions. In addition, overestimates along coastlines and underestimates in the Intertropical Convergence Zone introduced by the GOME LER were eliminated. While effective cloud fractions over the Saharan desert and the Arabian peninsula are successfully reduced in January, they are still too high in July relative to HICRU due to FRESCO+'s large sensitivity to albedo inaccuracies of highly reflecting targets and inappropriate aerosol information which hampers an accurate albedo retrieval. Apart from FRESCO+, the new MERIS albedo data base is applicable to any cloud retrieval algorithms using the O2 A-band or the O2-O2 absorption band around 477 nm. Moreover, the by-product of BSA at 442 nm can be used in NO2 remote sensing and the BSA at 620 nm, 665 nm, and 681 nm could be integrated in current H2O retrievals.


2006 ◽  
Vol 6 (2) ◽  
pp. 1813-1840 ◽  
Author(s):  
A. A. Kokhanovsky ◽  
W. von Hoyningen-Huene ◽  
V. V. Rozanov ◽  
S. Noël ◽  
K. Gerilowski ◽  
...  

Abstract. The Semianalytical CloUd Retrieval Algorithm (SACURA) is applied to the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) data. In particular, for the first time we derive simultaneously cloud optical thickness (COT), liquid water path (LWP), cloud top height (CTH), and cloud droplet radius (CDR) using SCIAMACHY measurements in the visible (442 nm, COT), in the oxygen A-band (755–775 nm, CTH) and in the infrared (1550 nm, CDR). Some of the results obtained are compared with those derived from the Medium Resolution Imaging Spectrometer (MERIS), which has better spatial resolution and observe almost the same scene as SCIAMACHY.


2006 ◽  
Vol 6 (12) ◽  
pp. 4129-4136 ◽  
Author(s):  
A. A. Kokhanovsky ◽  
W. von Hoyningen-Huene ◽  
V. V. Rozanov ◽  
S. Noël ◽  
K. Gerilowski ◽  
...  

Abstract. The SemiAnalytical CloUd Retrieval Algorithm (SACURA) is applied to the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) data. In particular, we derive simultaneously cloud optical thickness (COT) and cloud top height (CTH), using SCIAMACHY measurements in the visible (442 nm, COT) and in the oxygen A-band (755–775 nm, CTH). Some of the results obtained are compared with those derived from the Medium Resolution Imaging Spectrometer (MERIS), which has better spatial resolution and observes almost the same scene as SCIAMACHY. The same cloud algorithm is applied to both MERIS and SCIAMACHY data. In addition, we perform the vicarious calibration of SCIAMACHY at the wavelength 442 nm, using MERIS measurements at the same wavelength. Differences in the retrieved COT for the same cloud field obtained using MERIS and SCIAMACHY measurements are discussed.


2021 ◽  
Vol 13 (5) ◽  
pp. 920
Author(s):  
Zhongting Wang ◽  
Ruru Deng ◽  
Pengfei Ma ◽  
Yuhuan Zhang ◽  
Yeheng Liang ◽  
...  

Aerosol distribution with fine spatial resolution is crucial for atmospheric environmental management. This paper proposes an improved algorithm of aerosol retrieval from 250-m Medium Resolution Spectral Image (MERSI) data of Chinese FY-3 satellites. A mixing model of soil and vegetation was used to calculate the parameters of the algorithm from moderate-resolution imaging spectroradiometer (MODIS) reflectance products in 500-m resolution. The mixing model was used to determine surface reflectance in blue band, and the 250-m aerosol optical depth (AOD) was retrieved through removing surface contributions from MERSI data over Guangzhou. The algorithm was used to monitor two pollution episodes in Guangzhou in 2015, and the results displayed an AOD spatial distribution with 250-m resolution. Compared with the yearly average of MODIS aerosol products in 2015, the 250-m resolution AOD derived from the MERSI data exhibited great potential for identifying air pollution sources. Daily AODs derived from MERSI data were compared with ground results from CE318 measurements. The results revealed a correlation coefficient between the AODs from MERSI and those from the ground measurements of approximately 0.85, and approximately 68% results were within expected error range of ±(0.05 + 15%τ).


2008 ◽  
Vol 8 (1) ◽  
pp. 3721-3759 ◽  
Author(s):  
J. Vidot ◽  
R. Santer ◽  
O. Aznay

Abstract. The Medium Resolution Imaging Spectrometer (MERIS) launched in February 2002 on-board the ENVISAT spacecraft is making global observations of top-of-atmosphere (TOA) radiances. Aerosol optical properties are retrieved over land using Look-Up Table (LUT) based algorithm and surface reflectances in the blue and the red spectral regions. We compared instantaneous aerosol optical thicknesses retrieved by MERIS in the blue and the red at locations containing sites within the Aerosol Robotic Network (AERONET). Between 2002 and 2005, a set of 500 MERIS images were used in this study. The result shows that, over land, MERIS aerosol optical thicknesses are well retrieved in the blue and poorly retrieved in the red, leading to an underestimation of the Angstrom coefficient. Correlations are improved by applying a simple criterion to avoid scenes probably contaminated by thin clouds. To investigate the weakness of the MERIS algorithm, ground-based radiometer measurements have been used in order to retrieve new aerosol models, based on their Inherent Optical Properties (IOP). These new aerosol models slightly improve the correlation, but the main problem of the MERIS aerosol product over land can be attributed to the surface reflectance model in the red.


Sign in / Sign up

Export Citation Format

Share Document