scholarly journals B3010: a boosted TSI 3010 condensation particle counter for airborne studies

2019 ◽  
Vol 12 (4) ◽  
pp. 2531-2543 ◽  
Author(s):  
David Picard ◽  
Michel Attoui ◽  
Karine Sellegri

Abstract. In the present paper, we expose how we boosted the performance of a commercial condensation particle counter (CPC) model TSI 3010 to detect particles as small as 1.5 nm while preserving the robustness and reliability of the original instrument. The TSI 3010 was selected because of our deep knowledge of its internal workings and its large incorporated butanol reservoir that allows continuous operation for several hours without refill, which is well suited to airborne operation. Aside from this, it is still pretty easy to buy instruments from the TSI 3010 family from companies that specialize in used scientific instrument retail. The CPC described in this study is called B3010 hereafter, where the “B” stands for boosted. We provide an evaluation of its performances down to 1 nm using standard calibration methods and comparisons with ultrafine CPCs (TSI 3025 and TSI 3776), as well as with its original version. One important application of the B3010 is for high-altitude measurement stations and airborne studies, the instrument's detection efficiency was quantified for various inlet flow rates and pressures.

2018 ◽  
Author(s):  
David Picard ◽  
Michel Attoui ◽  
Karine Sellegri

Abstract. In the present paper, we expose how we boosted the performances of a commercial CPCmodel TSI 3010 to detect particles as small as 1.5 nm, while preserving the robustness and reliability of the original instrument. The TSI 3010 was selected for its wide availability on the second-hand market, our deep knowledge of its internals, and its large internal butanol reservoir that allows continuous operation for several hours without refill, which is well suited to airborne campaigns. The CPC described in this study is called B3010 hereafter, where the B stands for boosted. We provide an evaluation of its performances down to 1 nm using standard calibration methods, and comparisons with ultrafine CPCs (TSI 3025 and TSI 3776). One important application of the B3010 being high-altitude measurement stations and airborne studies, the instrument's detection efficiency was quantified for various inlet flow rates and pressures.


Atmosphere ◽  
2019 ◽  
Vol 10 (11) ◽  
pp. 665 ◽  
Author(s):  
Attoui ◽  
Kangasluoma

Tetraheptylammonium bromide (THABr), tetrabutylammonium bromide (TBABr) and tetraethylammonium bromide (TEABr) dissolved in methanol or water methanol mixtures (~ 1mM) produce via positive electrospray atomization and high resolution classification electrical classification standard clean ions (monomer and dimer) which are singly charged. THABr is hydrophobic and insoluble in water, TBABr and TEABr are hygroscopic and water soluble (0.6 and 2.8 kg/l respectively). These ions are used to study the effect of hygroscopicity on the activation of aerosol particles in the sub 2 nm range via the detection efficiency measurement of a boosted ultrafine TSI condensation particle counter (3025A). Water solubility of particles seems to play a role in the activation and growth with butanol vapor in the CPC (condensation particle counter) independently of the size.


2006 ◽  
Vol 40 (12) ◽  
pp. 1090-1097 ◽  
Author(s):  
T. Petäjä ◽  
G. Mordas ◽  
H. Manninen ◽  
P. P. Aalto ◽  
K. Hämeri ◽  
...  

2002 ◽  
Vol 33 (10) ◽  
pp. 1463-1469 ◽  
Author(s):  
K Hämeri ◽  
I.K Koponen ◽  
P.P Aalto ◽  
M Kulmala

2018 ◽  
Vol 13 (S349) ◽  
pp. 357-373
Author(s):  
Christiaan Sterken

AbstractThe International Astronomical Union was conceived in 1918, and was formed one year later in Brussels. One of the 32 initial Commissions was the Committee on Stellar Photometry that later on became IAU Commission 25 Astronomical Photometry and Polarimetry, and since 2015 Commission B6 with the same name. The initial functions to be exercised by the Committee were (a)to advise in the matter of notation, nomenclature, definitions, conventions, etc., and(b)to plan and execute investigations requiring the cooperation of several observers or institutions.The basic philosophy was that IAU Commission 25 was to be an advisory body, rather than a decision-making committee that imposes its regulations. This position was reconfirmed at the 10th IAU General Assembly in 1958.From the early days on, the Commission members engaged in the teaching of the principles of photometric measurement – either via the Commission meetings and the ensuing reports, or via external means, such as lectures and publications. The topics of instruction dealt with absorption of light in the atmosphere, the modification imposed by the character of the receiving apparatus, the unequal response of different receivers to a same stimulus, and variations in the data-recorder response from one experiment to another.From the 1930s on it was suggested that IAU Commission 25 takes responsibility in matters of standard stars, standard filters and standard calibration methods.During the first half-century since its foundation, Commission 25 was an active forum for discussions on the basic principles of astronomical photometry, including the associated problems of transformability of magnitudes and colour indices from one instrumental configuration to another. During the second half-century of its existence, the Commission has served as a sort of news agency reporting on the developments in detector engineering, filter technology and data reduction. All along the Commission members were committed to accuracy and precision, a struggle that was primarily driven by the jumps forward in performance and sensitivity of every new detector that was introduced.The development over one century shows that the Commission was continuously touching on the philosophy of precise measurement, where accurate measuring – for a select group of pioneers – was an end in itself.This presentation looks back on the opinions of key players in the photometric standardisation debate, and briefly presents two case studies that illustrate the illusionary accuracy reached over a century in determining, as Commission member Ralph Allan Sampson put it, “a detail like magnitude”.


2011 ◽  
Vol 101-102 ◽  
pp. 60-66
Author(s):  
Yi Jui Chiu ◽  
Khai Shoon Leong ◽  
Luh Maan Chang

The purpose of this paper is to assess technologies used in the monitoring of nano-particles that are available commercially and under research. The goal of the assessment is to propose a new device based on the technologies assessed. The assessment is performed based on information obtained from literatures review of articles and brochures, and from communications with representatives of the manufacturers of the counters. Two types of nano-particles counters were assessed; counters that are currently commercially available are the condensation particle counter (CPC), the scanning mobility particle spectrometer (SMPS). A description of how each counter works is given, and the advantages and disadvantages are highlighted. Experimental results showed that the performance of capillary had been installed and cleaned. The SMPS mean diameter fell within the range of the NIST standard. The sample offered well distribution in 300 and 400 nm.


Sign in / Sign up

Export Citation Format

Share Document