scholarly journals Assessing the Feasibility of Using a Neural Network to Filter OCO-2 Retrievals at Northern High Latitudes

2021 ◽  
Author(s):  
Joseph Mendonca ◽  
Ray Nassar ◽  
Christopher O'Dell ◽  
Rigel Kivi ◽  
Isamu Morino ◽  
...  

Abstract. Satellite retrievals of XCO2 at northern high latitudes currently have sparser coverage and lower data quality than most other regions of the world. We use a neural network (NN) to filter OCO-2 B10 bias-corrected XCO2 retrievals and compare the quality of the filtered data to the quality of the data filtered with the standard B10 quality control filter. To assess the performance of the NN filter, we use Total Carbon Column Observing Network (TCCON) data at selected northern high latitude sites as a truth proxy. We found that the NN filter decreases the overall bias by 0.25 ppm (~50 %), improves the precision by 0.18 ppm (~12 %), and increases the throughput by 16 % at these sites when compared to the standard B10 quality control filter. Most of the increased throughput was due to an increase in throughput during the spring, fall, and winter seasons. There was a decrease in throughput during the summer, but as a result the bias and precision were improved during the summer months. The main drawback of using the NN filter is that it lets through fewer retrievals at the highest latitude Arctic TCCON sites compared to the B10 quality control filter, but the lower throughput improves the bias and precision.

2021 ◽  
Vol 14 (12) ◽  
pp. 7511-7524
Author(s):  
Joseph Mendonca ◽  
Ray Nassar ◽  
Christopher W. O'Dell ◽  
Rigel Kivi ◽  
Isamu Morino ◽  
...  

Abstract. Satellite retrievals of XCO2 at northern high latitudes currently have sparser coverage and lower data quality than most other regions of the world. We use a neural network (NN) to filter Orbiting Carbon Observatory 2 (OCO-2) B10 bias-corrected XCO2 retrievals and compare the quality of the filtered data to the quality of the data filtered with the standard B10 quality control filter. To assess the performance of the NN filter, we use Total Carbon Column Observing Network (TCCON) data at selected northern high latitude sites as a truth proxy. We found that the NN filter decreases the overall bias by 0.25 ppm (∼ 50 %), improves the precision by 0.18 ppm (∼ 12 %), and increases the throughput by 16 % at these sites when compared to the standard B10 quality control filter. Most of the increased throughput was due to an increase in throughput during the spring, fall, and winter seasons. There was a decrease in throughput during the summer, but as a result the bias and precision were improved during the summer months. The main drawback of using the NN filter is that it lets through fewer retrievals at the highest-latitude Arctic TCCON sites compared to the B10 quality control filter, but the lower throughput improves the bias and precision.


2020 ◽  
Vol 12 (15) ◽  
pp. 2471
Author(s):  
Alexandra Runge ◽  
Guido Grosse

Permafrost is warming in the northern high latitudes, inducing highly dynamic thaw-related permafrost disturbances across the terrestrial Arctic. Monitoring and tracking of permafrost disturbances is important as they impact surrounding landscapes, ecosystems and infrastructure. Remote sensing provides the means to detect, map, and quantify these changes homogeneously across large regions and time scales. Existing Landsat-based algorithms assess different types of disturbances with similar spatiotemporal requirements. However, Landsat-based analyses are restricted in northern high latitudes due to the long repeat interval and frequent clouds, in particular at Arctic coastal sites. We therefore propose to combine Landsat and Sentinel-2 data for enhanced data coverage and present a combined annual mosaic workflow, expanding currently available algorithms, such as LandTrendr, to achieve more reliable time series analysis. We exemplary test the workflow for twelve sites across the northern high latitudes in Siberia. We assessed the number of images and cloud-free pixels, the spatial mosaic coverage and the mosaic quality with spectral comparisons. The number of available images increased steadily from 1999 to 2019 but especially from 2016 onward with the addition of Sentinel-2 images. Consequently, we have an increased number of cloud-free pixels even under challenging environmental conditions, which then serve as the input to the mosaicking process. In a comparison of annual mosaics, the Landsat+Sentinel-2 mosaics always fully covered the study areas (99.9–100 %), while Landsat-only mosaics contained data-gaps in the same years, only reaching coverage percentages of 27.2 %, 58.1 %, and 69.7 % for Sobo Sise, East Taymyr, and Kurungnakh in 2017, respectively. The spectral comparison of Landsat image, Sentinel-2 image, and Landsat+Sentinel-2 mosaic showed high correlation between the input images and mosaic bands (e.g., for Kurungnakh 0.91–0.97 between Landsat and Landsat+Sentinel-2 mosaic and 0.92–0.98 between Sentinel-2 and Landsat+Sentinel-2 mosaic) across all twelve study sites, testifying good quality mosaic results. Our results show that especially the results for northern, coastal areas was substantially improved with the Landsat+Sentinel-2 mosaics. By combining Landsat and Sentinel-2 data we accomplished to create reliably high spatial resolution input mosaics for time series analyses. Our approach allows to apply a high temporal continuous time series analysis to northern high latitude permafrost regions for the first time, overcoming substantial data gaps, and assess permafrost disturbance dynamics on an annual scale across large regions with algorithms such as LandTrendr by deriving the location, timing and progression of permafrost thaw disturbances.


2019 ◽  
Vol 2 (1) ◽  
pp. 18
Author(s):  
Yan Hari Tama Nasution ◽  
Raspal Singh ◽  
Ninny Siregar

<pre>In course of its production, many factor which can make the downhill quality production, especially in shares produce the component of panel of drum boiler, even part of Quality Control do not want to accept result of the production because assumed by a handicap. Defect type that happened that is porosity, under cut, weld beat And over mop, becoming main problem is defect type of porosity and weld beat of because at most happened knowable after. The control map in the world of Quality Control in company produce that is method solve of problem which is usually used in the field of industrial technique to control the quality of production. So that be story level of mistake or product handicap earn in minimizing till no mistake. In the world of Quality Control production company, this method in the field of the industrial technique in application in its execution and felt by result benefit and to the staff employees also represent an advantage to company minimizing cost of expenditure of purchasing of material and working hours of employees in the event of repetition of component work which is equal to rebought new other material , because effect of the happening of handicap produce.</pre>


2020 ◽  
Vol 13 (9) ◽  
pp. 5033-5063
Author(s):  
Nicole Jacobs ◽  
William R. Simpson ◽  
Debra Wunch ◽  
Christopher W. O'Dell ◽  
Gregory B. Osterman ◽  
...  

Abstract. Seasonal CO2 exchange in the boreal forest plays an important role in the global carbon budget and in driving interannual variability in seasonal cycles of atmospheric CO2. Satellite-based observations from polar orbiting satellites like the Orbiting Carbon Observatory-2 (OCO-2) offer an opportunity to characterize boreal forest seasonal cycles across longitudes with a spatially and temporally rich data set, but data quality controls and biases still require vetting at high latitudes. With the objective of improving data availability at northern, terrestrial high latitudes, this study evaluates quality control methods and biases of OCO-2 retrievals of atmospheric column-averaged dry air mole fractions of CO2 (XCO2) in boreal forest regions. In addition to the standard quality control (QC) filters recommended for the Atmospheric Carbon Observations from Space (ACOS) B8 (B8 QC) and ACOS B9 (B9 QC) OCO-2 retrievals, a third set of quality control filters were specifically tailored to boreal forest observations (boreal QC) with the goal of increasing data availability at high latitudes without sacrificing data quality. Ground-based reference measurements of XCO2 include observations from two sites in the Total Carbon Column Observing Network (TCCON) at East Trout Lake, Saskatchewan, Canada, and Sodankylä, Finland. OCO-2 retrievals were also compared to ground-based observations from two Bruker EM27/SUN Fourier transform infrared spectrometers (FTSs) at Fairbanks, Alaska, USA. The EM27/SUN spectrometers that were deployed in Fairbanks were carefully monitored for instrument performance and were bias corrected to TCCON using observations at the Caltech TCCON site. The B9 QC were found to pass approximately twice as many OCO-2 retrievals over land north of 50∘ N than the B8 QC, and the boreal QC were found to pass approximately twice as many retrievals in May, August, and September as the B9 QC. While boreal QC results in a substantial increase in passable retrievals, this is accompanied by increases in the standard deviations in biases at boreal forest sites from ∼1.4 parts per million (ppm) with B9 QC to ∼1.6 ppm with boreal QC. Total average biases for coincident OCO-2 retrievals at the three sites considered did not consistently increase or decrease with different QC methods, and instead, responses to changes in QC varied according to site and satellite viewing geometries. Regardless of the quality control method used, seasonal variability in biases was observed, and this variability was more pronounced at Sodankylä and East Trout Lake than at Fairbanks. Long-term coincident observations from TCCON, EM27/SUN, and satellites from multiple locations would be necessary to determine whether the reduced seasonal variability in bias at Fairbanks is due to geography or instrumentation. Monthly average biases generally varied between −1 and +1 ppm at the three sites considered, with more negative biases in spring (March, April, and May – MAM) and autumn (September and October – SO) but more positive biases in the summer months (June, July, and August – JJA). Monthly standard deviations in biases ranged from approximately 1.0 to 2.0 ppm and did not exhibit strong seasonal dependence, apart from exceptionally high standard deviation observed with all three QC methods at Sodankylä in June. There was no evidence found to suggest that seasonal variability in bias is a direct result of air mass dependence in ground-based retrievals or of proximity bias from coincidence criteria, but there were a number of retrieval parameters used as quality control filters that exhibit seasonality and could contribute to seasonal dependence in OCO-2 bias. Furthermore, it was found that OCO-2 retrievals of XCO2 without the standard OCO-2 bias correction exhibit almost no perceptible seasonal dependence in average monthly bias at these boreal forest sites, suggesting that seasonal variability in bias is introduced by the bias correction. Overall, we found that modified quality controls can allow for significant increases in passable OCO-2 retrievals with only marginal compromises in data quality, but seasonal dependence in biases still warrants further exploration.


2020 ◽  
Author(s):  
Peter Joyce ◽  
Manuel Gloor ◽  
Roel Brienen ◽  
Wolfgang Buermann

&lt;p&gt;Land vegetation growth in the northern high latitudes (north of 50&amp;#730;N) is strongly temperature limited, thus anomalously warm years are expected to result in an increased drawdown of Carbon Dioxide (CO&lt;sub&gt;2&lt;/sub&gt;) and vice versa. Piao et al (2017) concluded in an analysis of climate and CO&lt;sub&gt;2&lt;/sub&gt; data from Point Barrow, Alaska that there was a weakening response of northern high latitude spring carbon uptake to temperature anomalies over the last 40 years. They proposed that this is due to a weakening control of temperature on productivity. We have analysed northern high latitude climate and remote sensing vegetation indices, as well as atmospheric CO&lt;sub&gt;2&lt;/sub&gt; data at Point Barrow, with atmospheric transport analyses of the footprint seen at Barrow. Our results show no large-scale significant change in the spring NDVI-temperature relationship inside the footprint of Barrow, and across the high northern latitudes as a whole. This casts doubt on the assertion that the changing relationship between CO&lt;sub&gt;2&lt;/sub&gt; uptake and temperature is driven by a change in vegetation response to temperature. We thus tested several alternative mechanisms that could explain the apparent weakening, including a change in interannual variability of atmospheric transport (i.e. the footprint seen by Barrow) and the spatial agreement of temperature anomalies. We find that the heterogeneity of temperature anomalies increased over time, whereas there is no significant change in interannual variation in the footprint seen by Barrow. These results offer an additional explanation for the apparent decrease in spring temperature sensitivity of northern high latitude CO&lt;sub&gt;2&lt;/sub&gt; uptake.&lt;/p&gt;


2020 ◽  
Vol 305 ◽  
pp. 139-146
Author(s):  
Yuh Wen Chen ◽  
Sheng Chieh Wang ◽  
Pin Chuan Yao ◽  
Wen Tsung Lin ◽  
Aisyah Larasati ◽  
...  

The surface treatment conditions of a plastic surface are related to the quality of finished products. Usually, more than 20 causes dominate the success of electroplating for acrylonitrile butadiene styrene (ABS). Thus, the quality control is very complicated and challenging. Even nowadays, most of the production quality still relies on the operator's experience and intuition. This research takes a company of water hardware in Taiwan as the research object. We propose a revolutionary concept of quality management, combining artificial intelligence and surface treatment process altogether. We set up a parameter monitoring system during production to predict the quality of ABS metallization using neural network models such as artificial intelligence forms the basis of the intelligent manufacturing system. It can be used as a quality control tool to improve quality yield and industrial competitiveness. Totally 13 operational parameters (causes) and one quality parameter (consequence) of the electroplating tanks were collected from time to time to build the NN models. Interestingly, we finally find the fuzzy NN model performs better than the precise NN model. We conclude this is resulting from the limitation and vagueness of data.


2019 ◽  
Author(s):  
Jaume Ramon ◽  
Llorenç Lledó ◽  
Núria Pérez-Zañón ◽  
Albert Soret ◽  
Francisco J. Doblas-Reyes

Abstract. A dataset containing quality controlled wind observations from 222 tall towers has been created. Wind speed and wind direction measurements have been collected from existing tall towers around the world in an effort to boost the utilisation of these non-standard atmospheric datasets, especially within the wind energy and research fields. The observations taken at several heights greater than 10 metres above ground level have been retrieved from various sparse datasets and compiled in a unique collection with a common format, access, documentation and quality control. For the latter, a total of 18 Quality Control checks have been considered to ensure the high quality of the wind records. Non-quality-controlled temperature, relative humidity and barometric pressure data from the towers have also been obtained and included in the dataset. The Tall Tower Dataset (Ramon and Lledó, 2019a) is published in the repository EUDAT and made available at https://doi.org/10.23728/b2share.0d3a99db75df4238820ee548f35ee36b.


2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Lei Xiao

In the context of the Internet era, more and more parties have begun to store, process, and analyze data, but the accompanying question is whether people are reasonable about the data under the impact of massive data, effective and efficient analysis, especially the problems faced in this project. This article aims to study the quality control problems faced by electric power and electrical engineering in the construction process through the use of convolutional neural networks. Under this idea, this article proposes a multilayer convolution method. The experimental results show that the use of the improved multilayer convolution method for the convolution method of the convolutional neural network can effectively improve the multiple analysis problems of small datasets in the construction of electric power and electrical engineering; in this way, the relevant data are analyzed; by controlling the quality of construction, the quality problem has been greatly improved. After comparison, it is concluded that the overall construction quality has increased by 35%.


2016 ◽  
Vol 2 (1) ◽  
Author(s):  
Adam A Bahishti

The quality of an article is a critical parameter for the success of any scholarly journal, and the Journal of Modern Materials (JMM) is no exception. Peer review process presents a barrier prior to publication which acts as a quality control filter in science. Typically, the journal editor assigns submitted paper to two or more qualified peers – recognized experts in the relevant field. The reviewers will then submit detailed criticism of the paper along with a recommendation to reject, accept with major revisions, accept with minor revisions, or accept as it is. The quality and consistency of peer review will be the key success for the Journal of Modern Materials.


Author(s):  
Arijit Mukherjee ◽  
Abhijit Chakraborty ◽  
Sujit Kumar Garai

<div><p><em>The SMEs are an important part for world economy. The various categories of SMEs are spread throughout the world. In some cases they are competing with the big companies and at some instances they are working as vendor for supplying their spare parts and ancillaries. But there is a severe problem regarding quality of the product produced by them. In this paper an attempt has been made to improve the quality of the product by the help of Quality Control. For this , a particular SME firm has been studied and analyzed in order to give a solution of the quality related problems.</em></p></div>


Sign in / Sign up

Export Citation Format

Share Document