On the modeling of thermohydrodynamic and biogeochemical processes in the inland water objects

2020 ◽  
Author(s):  
Daria Gladskikh ◽  
Evgeny Mortikov ◽  
Victor Stepanenko
Keyword(s):  
Carbon Dioxide ◽  
Numerical Study ◽  
Three Dimensional ◽  
Measurement Data ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Inland Water ◽  
One Dimensional ◽  
Biochemical Processes ◽  
Dimensional Models

<p>Currently, one-dimensional and three-dimensional models are widely used to model thermohydrodynamic and biochemical processes in lakes and water rеreservoirs. One-dimensional models are highly computationally efficient and are used to parameterize land water bodies in climate models, however, when calculating large lakes and reservoirs with complex geometry, such models may incorrectly reproduce processes associated with horizontal heterogeneity. This becomes especially important for the prediction of water quality and euthrophication.</p><p>A three-dimensional model of thermohydrodynamics and biochemistry of an inland water obect is presented, which is based on the hydrostatic RANS model [1-3], and the parameterization of biochemical processes is implemented by analogy with the scheme for calculating biochemistry in the one-dimensional LAKE model [4]. Thus, the three-dimensional model is supplemented by a description of the transport of substances such as oxygen (O<sub>2</sub>), carbon dioxide (CO<sub>2</sub>), methane (CH<sub>4</sub>), as well as phyto- and zooplankton. The effect of turbulent diffusion and large-scale water movements on the distribution of a methane concentration field is studied.</p><p>To verify the calculation results, idealized numerical experiments and comparison with the measurement data on Lake Kuivajärvi (Finland) were used.</p><p>The work was supported by grants of the RF President’s Grant for Young Scientists (MK-1867.2020.5, MD-1850.2020.5) and by the RFBR (18-05-00292, 18-35-00602, 20-05-00776). <br><br>References:<br>[1] Mortikov E.V. Numerical simulation of the motion of an ice keel in stratified flow // Izv. Atmos. Ocean. Phys. 2016. 52. P. 108-115.<br>[2] Mortikov E.V., Glazunov A.V., Lykosov V.N. Numerical study of plane Couette flow: turbulence statistics and the structure of pressure-strain correlations // Russian Journal of Numerical Analysis and Mathematical Modelling. 2019. V. 34, N 2. P. 119-132.<br>[3] D.S. Gladskikh, V.M. Stepanenko, E.V. Mortikov, On the influence of the horizontal dimensions of inland waters on the thickness of the upper mixed layer. // Water Resourses. 2019. 18 pages. (submitted)<br>[4] Victor Stepanenko, Ivan Mammarella, Anne Ojala, Heli Miettinen, Vasily Lykosov, and Vesala Timo. LAKE 2.0: a model for temperature, methane, carbon dioxide and oxygen dynamics in lakes. Geoscientific Model Development, 9(5): 1977–2006, 2016.</p>

On the numerical study of thermohydrodynamics and biochemistry of inland water bodies

2021 ◽  
Author(s):  
Daria Gladskikh ◽  
Evgeny Mortikov ◽  
Victor Stepanenko
Keyword(s):  
Mixed Layer ◽  
Numerical Study ◽  
Three Dimensional ◽  
Water Bodies ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Lake Model ◽  
Upper Mixed Layer ◽  
The One

<p>The study of thermodynamic and biochemical processes of inland water objects using one- and three-dimensional RANS numerical models was carried out both for idealized water bodies and using measurements data. The need to take into account seiche oscillations to correctly reproduce the deepening of the upper mixed layer in one-dimensional (vertical) models is demonstrated. We considered the one-dimensional LAKE model [1] and the three-dimensional model [2, 3, 4] developed at the Research Computing Center of Moscow State University on the basis of a hydrodynamic code combining DNS/LES/RANS approaches for calculating geophysical turbulent flows. The three-dimensional model was supplemented by the equations for calculating biochemical substances by analogy with the one-dimensional biochemistry equations used in the LAKE model. The effect of mixing processes on the distribution of concentration of greenhouse gases, in particular, methane and oxygen, was studied.</p><p>The work was supported by grants of the RF President’s Grant for Young Scientists (MK-1867.2020.5, MD-1850.2020.5) and by the RFBR (19-05-00249, 20-05-00776). </p><p>1. Stepanenko V., Mammarella I., Ojala A., Miettinen H., Lykosov V., Timo V. LAKE 2.0: a model for temperature, methane, carbon dioxide and oxygen dynamics in lakes // Geoscientific Model Development. 2016. V. 9(5). P. 1977–2006.<br>2. Mortikov E.V., Glazunov A.V., Lykosov V.N. Numerical study of plane Couette flow: turbulence statistics and the structure of pressure-strain correlations // Russian Journal of Numerical Analysis and Mathematical Modelling. 2019. 34(2). P. 119-132.<br>3. Mortikov, E.V. Numerical simulation of the motion of an ice keel in stratified flow // Izv. Atmos. Ocean. Phys. 2016. V. 52. P. 108-115.<br>4. Gladskikh D.S., Stepanenko V.M., Mortikov E.V. On the influence of the horizontal dimensions of inland waters on the thickness of the upper mixed layer // Water Resourses. 2021.V. 45, 9 pages. (in press) </p>

A comparison of one-, two- and three-dimensional model representations of stratospheric gases

1979 ◽  
Vol 290 (1376) ◽  
pp. 477-494 ◽  
Keyword(s):  
Stratospheric Ozone ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Jet Streams ◽  
Model Calculations ◽  
One Dimensional ◽  
Dimensional Models ◽  
Molecular Number

Three- and two-dimensional model results have been averaged to investigate conceptual errors in two- and one-dimensional models. Average dynamical quantities show inter-hemispheric asymmetries in both mean and eddy vertical motions, with anomalous behaviour of tracers near effective source and sink regions. Zonal, hemispheric and global means of the rates of gas reactions show large deviations between terms like k : [A] [B] and k : [A] [B], causing significant errors in two- and one-dimensional model calculations. These errors are often associated with dynamical features such as jet streams or the tropopause, and affect the entire model atmospheres except in the summer mid-stratosphere. It is concluded that correlated measurements of atmospheric molecular number densities are urgently required to understand the deficiencies in models, which have been widely used to make perturbation calculations of the effects of aircraft and chloro-fluoromethanes on stratospheric ozone. The sources of error described in this work arise from inadequacies in the formulation of one- and two-dimensional models, rather than from uncertainties in the input data, and have not been included in published error analyses.

Mine Impact Burial Prediction From One to Three Dimensions

2008 ◽  
Vol 62 (1) ◽  
Author(s):  
Peter C. Chu
Keyword(s):  
Three Dimensional ◽  
Time History ◽  
Three Dimensions ◽  
Vertical Position ◽  
Burial Depth ◽  
Prediction Errors ◽  
Two Dimensional ◽  
Dimensional Model ◽  
One Dimensional ◽  
Dimensional Models

The Navy’s mine impact burial prediction model creates a time history of a cylindrical or a noncylindrical mine as it falls through air, water, and sediment. The output of the model is the predicted mine trajectory in air and water columns, burial depth/orientation in sediment, as well as height, area, and volume protruding. Model inputs consist of parameters of environment, mine characteristics, and initial release. This paper reviews near three decades’ effort on model development from one to three dimensions: (1) one-dimensional models predict the vertical position of the mine’s center of mass (COM) with the assumption of constant falling angle, (2) two-dimensional models predict the COM position in the (x,z) plane and the rotation around the y-axis, and (3) three-dimensional models predict the COM position in the (x,y,z) space and the rotation around the x-, y-, and z-axes. These models are verified using the data collected from mine impact burial experiments. The one-dimensional model only solves one momentum equation (in the z-direction). It cannot predict the mine trajectory and burial depth well. The two-dimensional model restricts the mine motion in the (x,z) plane (which requires motionless for the environmental fluids) and uses incorrect drag coefficients and inaccurate sediment dynamics. The prediction errors are large in the mine trajectory and burial depth prediction (six to ten times larger than the observed depth in sand bottom of the Monterey Bay). The three-dimensional model predicts the trajectory and burial depth relatively well for cylindrical, near-cylindrical mines, and operational mines such as Manta and Rockan mines.

scholarly journals Hydraulic modeling of combined sewers overflow integrating the results of the SWMM and CFX models.

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
D. Pulgarín ◽  
J. Plaza ◽  
J. Ruge ◽  
J. Rojas
Keyword(s):  
Three Dimensional ◽  
Hydraulic Modeling ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Ansys Cfx ◽  
Combined Sewer ◽  
The One ◽  
Swmm Model

This study proposes a methodology for the calibration of combined sewer overflow (CSO), incorporating the results of the three-dimensional ANSYS CFX model in the SWMM one-dimensional model. The procedure consists of constructing calibration curves in ANSYS CFX that relate the input flow to the CSO with the overflow, to then incorporate them into the SWMM model. The results obtained show that the behavior of the flow over the crest of the overflow weir varies in space and time. Therefore, the flow of entry to the CSO and the flow of excesses maintain a non-linear relationship, contrary to the results obtained in the one-dimensional model. However, the uncertainty associated with the idealization of flow methodologies in one dimension is reduced under the SWMM model with kinematic wave conditions and simulating CSO from curves obtained in ANSYS CFX. The result obtained facilitates the calibration of combined sewer networks for permanent or non-permanent flow conditions, by means of the construction of curves in a three-dimensional model, especially when the information collected in situ is limited.

Three-Dimensional Model of the Human Eye-Head Saccadic System

1997 ◽  
Vol 77 (2) ◽  
pp. 654-666 ◽  
Author(s):  
Douglas Tweed
Keyword(s):  
Three Dimensional ◽  
Head Movements ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Gaze Shifts ◽  
One Dimensional ◽  
Human Eye ◽  
Saccadic System ◽  
Listing's Law ◽  
Listing’S Law

Tweed, Douglas. Three-dimensional model of the human eye-head saccadic system. J. Neurophysiol. 77: 654–666, 1997. Current theories of eye-head gaze shifts deal only with one-dimensional motion, and do not touch on three-dimensional (3-D) issues such as curvature and Donders' laws. I show that recent 3-D data can be explained by a model based on ideas that are well established from one-dimensional studies, with just one new assumption: that the eye is driven toward a 3-D orientation in space that has been chosen so that Listing's law of the eye in head will hold when the eye-head movement is complete. As in previous, one-dimensional models, the eye and head are feedback-guided and the commands specifying desired eye position eye pass through a neural “saturation” so as to stay within the effective oculomotor range. The model correctly predicts the complex, 3-D trajectories of the head, eye in space, and eye in head in a variety of saccade tasks. And when it moves repeatedly to the same target, varying the contributions of eye and head, the model lands in different eye-in-space positions, but these positions differ only in their cyclotorsion about the line of sight, so they all point that line at the target—a behavior also seen in real eye-head saccades. Between movements the model obeys Listing's law of the eye in head and Donders' law of the head on torso, but during certain gaze shifts involving large torsional head movements, it shows marked, 8° deviations from Listing's law. These deviations are the most important untested predictions of the theory. Their experimental refutation would sink the model, whereas confirmation would strongly support its central claim that the eye moves toward a 3-D position in space chosen to obey Listing's law and, therefore, that a Listing operator exists upstream from the eye pulse generator.

Study on the Application of Computer Three-Dimensional Model's Simulation Functions

2013 ◽  
Vol 443 ◽  
pp. 27-30
Author(s):  
Qin Gu
Keyword(s):  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Simulation Functions ◽  
Dimensional Models ◽  
Three Dimensional Models

In this paper, the simulation functions of computer three-dimensional model as well as the advantages in the simulated application are briefly introduced, and also the application of the three-dimensional models simulation functions to the different industries is discussed in details.

Numerical Study of the Pusher-Type Billet Reheating Furnace

2005 ◽  
Author(s):  
Linjiang Zou ◽  
Chaoxiang Li ◽  
Yinmei Yuan ◽  
Wei Guo ◽  
Fan Yang ◽  
...  
Keyword(s):  
Software Package ◽  
High Speed ◽  
Gas Flow ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cfd Model ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Iron And Steel ◽  
Reheating Furnace

In the present work, a commercial CFD software package, FLUENT, was used to develop a three-dimensional model of pusher-type billet reheating furnace for the second high speed wire rod plant of XiangTan Iron and steel Co. Ltd. The purpose of the study was to gain a better understanding of the gas flow and velocity and pressure distribution in the furnace. The results show that the numerical results are in agreement with the practice and the characteristics of the furnace configuration. The CFD model can be used to improve the performance and structure by analyzing and studying the behavior of the reheating furnace.

Analysis of the Containment Thermal-Hydraulic Behavior of a Small Reactor During Loss of Coolant Accident

2017 ◽  
Author(s):  
Qian Lin ◽  
Weizhong Zhang
Keyword(s):  
Cooling System ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
One Dimensional ◽  
Loss Of Coolant Accident ◽  
Lumped Parameter ◽  
Loss Of Coolant ◽  
Calculation Results ◽  
The One

The containment thermal hydraulics of a small reactor during loss of coolant accident (LOCA) is studied by a lumped parameter one-dimensional model and a three-dimensional model. The capability of a kind of heat exchanger type passive containment cooling system (PCCS) is analyzed by the one-dimensional model. The calculation results show that, the decay heat can be removed and the containment pressure can be decreased by the proposed PCCS. The steam and non-condensable gas (the air) distribution in the containment is investigated, the mixing and stratification behaviors are analyzed for several different cases, in which the PCCS and condenser are located at higher, base or lower position. The sensitivity analysis of the PCCS elevation shows that, in despite of the different gas stratification, the containment pressures are nearly the same. Similar conclusions can be obtained by the one-dimensional model and three-dimensional model. The preliminary results may indicate that, the designed PCCS and condenser can be located at a lower part, which will be benefit for the economy of the small reactor or meet other requirements.

Sign in / Sign up

Export Citation Format

Share Document