Characterization of methane emissions from oil and gas production in Mexico: Linking measurements to mitigation

Author(s):  
Daniel Zavala-Araiza ◽  
Mark Omara ◽  
Ritesh Gautam ◽  
Mackenzie Smith ◽  
Stephen Conley ◽  
...  

<p>A wide body of research has characterized methane emissions from the oil and gas supply chain in the US, with recent efforts gaining traction in Canada and Europe. In contrast, empirical data is limited for other significant oil and gas producing regions across the global south. Consequently, measuring and characterizing methane emissions across global oil and gas operations is crucial to the design of effective mitigation strategies.</p><p>Several countries have announced pledges to reduce methane emissions from this sector (e.g., North America, Climate and Clean Air Coalition [CCAC] ministers). In the case of Mexico, the federal government recently published regulations supporting a 40-45% reduction of methane emissions from oil and gas. For these regulations to be effective, it is critical to understand the current methane emission patterns.</p><p>We present results from multi-scale empirical estimates of methane emissions from Mexico’s major oil and gas production regions (both offshore and onshore), based on a set of airborne-based measurement campaigns, analysis of satellite data (TROPOMI), and development of spatially explicit inventories. Our results provide a revised estimate of total emissions in the sampled regions and highlight the importance of empirically based characterization as a basis for prioritization in terms of emission reduction opportunities.</p><p>Finally, we highlight how these measurements –as well as similar policy-relevant studies- connect into action, based on the current needs from relevant stakeholders (e.g., inventory builders, regulators and industry).</p>

2018 ◽  
Vol 52 (19) ◽  
pp. 11206-11214 ◽  
Author(s):  
Pablo E. Saide ◽  
Daniel F. Steinhoff ◽  
Branko Kosovic ◽  
Jeffrey Weil ◽  
Nicole Downey ◽  
...  

2019 ◽  
Author(s):  
Yibin Weng ◽  
Ming Xue ◽  
Xiangyu Cui ◽  
Xingchun Li

2018 ◽  
Vol 18 (9) ◽  
pp. 6483-6491 ◽  
Author(s):  
Jian-Xiong Sheng ◽  
Daniel J. Jacob ◽  
Alexander J. Turner ◽  
Joannes D. Maasakkers ◽  
Melissa P. Sulprizio ◽  
...  

Abstract. We use observations of boundary layer methane from the SEAC4RS aircraft campaign over the Southeast US in August–September 2013 to estimate methane emissions in that region through an inverse analysis with up to 0.25∘×0.3125∘ (25×25 km2) resolution and with full error characterization. The Southeast US is a major source region for methane including large contributions from oil and gas production and wetlands. Our inversion uses state-of-the-art emission inventories as prior estimates, including a gridded version of the anthropogenic EPA Greenhouse Gas Inventory and the mean of the WetCHARTs ensemble for wetlands. Inversion results are independently verified by comparison with surface (NOAA∕ESRL) and column (TCCON) methane observations. Our posterior estimates for the Southeast US are 12.8±0.9 Tg a−1 for anthropogenic sources (no significant change from the gridded EPA inventory) and 9.4±0.8 Tg a−1 for wetlands (27 % decrease from the mean in the WetCHARTs ensemble). The largest source of error in the WetCHARTs wetlands ensemble is the land cover map specification of wetland areal extent. Our results support the accuracy of the EPA anthropogenic inventory on a regional scale but there are significant local discrepancies for oil and gas production fields, suggesting that emission factors are more variable than assumed in the EPA inventory.


2016 ◽  
Vol 50 (5) ◽  
pp. 2487-2497 ◽  
Author(s):  
John. D. Albertson ◽  
Tierney Harvey ◽  
Greg Foderaro ◽  
Pingping Zhu ◽  
Xiaochi Zhou ◽  
...  

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Chinedu I. Ossai

Effective management of assets in the oil and gas industry is vital in ensuring equipment availability, increased output, reduced maintenance cost, and minimal nonproductive time (NPT). Due to the high cost of assets used in oil and gas production, there is a need to enhance performance through good assets management techniques. This involves the minimization of NPT which accounts for about 20–30% of operation time needed from exploration to production. Corrosion contributes to about 25% of failures experienced in oil and gas production industry, while more than 50% of this failure is associated with sweet and sour corrosions in pipelines. This major risk in oil and gas production requires the understanding of the failure mechanism and procedures for assessment and control. For reduced pipeline failure and enhanced life cycle, corrosion experts should understand the mechanisms of corrosion, the risk assessment criteria, and mitigation strategies. This paper explores existing research in pipeline corrosion, in order to show the mechanisms, the risk assessment methodologies, and the framework for mitigation. The paper shows that corrosion in pipelines is combated at all stages of oil and gas production by incorporating field data information from previous fields into the new field’s development process.


2021 ◽  
Author(s):  
Maureen Lackner ◽  
Jonathan Camuzeaux ◽  
Suzi Kerr ◽  
Kristina Mohlin

Significance While the US oil majors are adopting strategies primarily based on decarbonising oil and gas production, European companies are also developing new businesses designed to compensate for future demand-led reductions in oil and gas revenues. The European majors’ entry into the power sector and renewable energy markets brings new, well-financed and technologically proficient competitors into a sector made up predominantly of utilities and smaller developers. Impacts Hydrocarbon majors' capital spending on renewables will rise over the next decade. The oil majors will continue to buy into promising new energy transition technologies. These companies will invest in oil output and protect their legacy assets, but their valuations will be less driven by their oil reserves.


2021 ◽  
Vol 73 (07) ◽  
pp. 7-8
Author(s):  
Pam Boschee

Drought conditions rated as “moderate or worse” affected 31 US states as of 8 June, as reported by the US National Integrated Drought Information System. Particularly dry are the West and Upper Midwest regions, relevant to the Permian and Bakken, respectively. While not a record-level drought, attention is turning to the Missouri River in North Dakota where streamflow levels are at low levels for this time of year—about 48% below the seasonal average. About 96% of the water in North Dakota’s rivers and streams flows through it, making it one of the main sources of fresh water for oil and gas production in the Bakken. In the extreme drought, water restrictions could come into play. Throughout the industry, recycling and reuse of frac and produced water have been studied, and where the chemical makeup of the frac or produced water is suitable for optimal and economical treatment, it has been implemented. However, Bakken production is typically associated with 1.0 to 1.5 bbl of produced water per barrel of oil (a water cut of approximately 50%). It is highly saline with total dissolved solids (TDS) ranging up to 350,000 mg/L (seawater is about 35,000, or 10 times less salty than Bakken brine). Treatment options for such high TDS levels are limited and often cost-prohibitive. The Bakken’s produced water volumes increased fourfold since 2008 to about 740 million bbl per year due to increasing volumes per well and increasing water cut. Produced water disposal volumes in the same period increased fivefold to about 680 million bbl per year. More than 95% of saltwater disposal (SWD) targets the Inyan Kara Formation, the lowermost sandstone interval of the Dakota Group. The increase in SWD volumes has resulted in localized areas of high pressure in the formation in geographic regions associated with high levels of oil and gas activity. This increased pressure affects the economics and risk associated with the drilling of new wells that now require additional intermediate casing strings (“Dakota Strings”), adding a cost of $300,000 to $700,000 per well. About 200 wells to date have been identified with additional casing strings, according to the Energy & Environmental Research Center (EERC). Faced with the challenges of high salinity in recycling/reuse of produced water, constraints on SWD injection, freshwater limitations, pressure regulation, and inflated drilling costs, a 2-year project was begun in January 2020 which may hold promise for greater use of the produced water. Participants in the $1.3-million project are EERC, Nuverra Environmental Solutions, and the US Department of Energy.


Energy Policy ◽  
2006 ◽  
Vol 34 (12) ◽  
pp. 1389-1398 ◽  
Author(s):  
David E. Dismukes ◽  
Jeffrey M. Burke ◽  
Dmitry V. Mesyanzhinov

Sign in / Sign up

Export Citation Format

Share Document