The Copernicus global 1/12° oceanic and sea ice reanalysis

2021 ◽  
Author(s):  
Jean-Michel Lellouche ◽  
Romain Bourdalle-Badie ◽  
Eric Greiner ◽  
Gilles Garric ◽  
Angelique Melet ◽  
...  
Keyword(s):  
Sea Ice ◽  
Real Time ◽  
Sea Level ◽  
Observation System ◽  
Small Scale ◽  
Free Access ◽  
In Situ Observation ◽  
Seasonal Forecasts ◽  
Concentration Data

<p>The GLORYS12V1 system is a global eddy-resolving physical ocean and sea ice reanalysis at 1/12° resolution covering the 1993-present altimetry period, designed and implemented in the framework of the Copernicus Marine Environment Monitoring Service (CMEMS). All the essential ocean physical variables from this reanalysis are available with free access through the CMEMS data portal.</p><p>The GLORYS12V1 reanalysis is based on the current CMEMS global real-time forecasting system, apart from a few specificities that are detailed in this manuscript. The model component is the NEMO platform driven at the surface by atmospheric conditions from the ECMWF ERA-Interim reanalysis. Ocean observations are assimilated by means of a reduced-order Kalman filter. Along track altimeter sea level anomaly, satellite sea surface temperature and sea ice concentration data and in situ temperature and salinity (T/S) vertical profiles are jointly assimilated. A 3D-VAR scheme provides an additional correction for the slowly-evolving large-scale biases in temperature and salinity.</p><p>The performance of the reanalysis is first addressed in the space of the assimilated observations and shows a clear dependency on the time-dependent in situ observation system, which is intrinsic to most reanalyses. The general assessment of GLORYS12V1 highlights a level of performance at the state-of-the-art and the reliability of the system to correctly capture the main expected climatic interannual variability signals for ocean and sea ice, the general circulation and the inter-basins exchanges. In terms of trends, GLORYS12V1 shows a higher than observed  warming trend together with a lower than observed global mean sea level rise.</p><p>Comparisons made with an experiment carried out on the same platform without assimilation show the benefit of data assimilation in controlling water masses properties and their low frequency variability. Examination of the deep signals below 2000 m depth shows that the reanalysis does not suffer from artificial signals even in the pre-Argo period.</p><p>Moreover, GLORYS12V1 represents particularly well the small-scale variability of surface dynamics and compares well with independent (non-assimilated) data. Comparisons made with a twin experiment carried out at ¼° resolution allows characterizing and quantifying the strengthened contribution of the 1/12° resolution onto the downscaled dynamics.</p><p>In conclusion, GLORYS12V1 provides a reliable physical ocean state for climate variability and supports applications such as seasonal forecasts. In addition, this reanalysis has strong assets to serve regional applications and should provide relevant physical conditions for applications such as marine biogeochemistry. In a near future, GLORYS12V1 will be maintained to be as close as possible to real time and could therefore provide a relevant reference statistical framework for many operational applications.</p>

scholarly journals The Copernicus Global 1/12° Oceanic and Sea Ice GLORYS12 Reanalysis

2021 ◽  
Vol 9 ◽  
Author(s):  
Lellouche Jean-Michel ◽  
Greiner Eric ◽  
Bourdallé-Badie Romain ◽  
Garric Gilles ◽  
Melet Angélique ◽  
...  
Keyword(s):  
Sea Ice ◽  
Sea Level ◽  
General Circulation ◽  
Large Scale ◽  
Observation System ◽  
Small Scale ◽  
Atmospheric Conditions ◽  
Seasonal Forecasts ◽  
Sea Ice Concentration

GLORYS12 is a global eddy-resolving physical ocean and sea ice reanalysis at 1/12° horizontal resolution covering the 1993-present altimetry period, designed and implemented in the framework of the Copernicus Marine Environment Monitoring Service (CMEMS). The model component is the NEMO platform driven at the surface by atmospheric conditions from the ECMWF ERA-Interim reanalysis. Ocean observations are assimilated by means of a reduced-order Kalman filter. Along track altimeter sea level anomaly, satellite sea surface temperature and sea ice concentration, as well as in situ temperature and salinity vertical profiles are jointly assimilated. A 3D-VAR scheme provides an additional correction for the slowly-evolving large-scale biases in temperature and salinity. The performance of the reanalysis shows a clear dependency on the time-dependent in situ observation system. The general assessment of GLORYS12 highlights a level of performance at the state-of-the-art and the capacity of the system to capture the main expected climatic interannual variability signals for ocean and sea ice, the general circulation and the inter-basins exchanges. In terms of trends, GLORYS12 shows a higher than observed warming trend together with a slightly lower than observed global mean sea level rise. Comparisons made with an experiment carried out on the same platform without assimilation show the benefit of data assimilation in controlling water mass properties and sea ice cover and their low frequency variability. Moreover, GLORYS12 represents particularly well the small-scale variability of surface dynamics and compares well with independent (non-assimilated) data. Comparisons made with a twin experiment carried out at 1/4° resolution allows characterizing and quantifying the strengthened contribution of the 1/12° resolution onto the downscaled dynamics. GLORYS12 provides a reliable physical ocean state for climate variability and supports applications such as seasonal forecasts. In addition, this reanalysis has strong assets to serve regional applications and provide relevant physical conditions for applications such as marine biogeochemistry. In the near future, GLORYS12 will be maintained to be as close as possible to real time and could therefore provide relevant and continuous reference past ocean states for many operational applications.

In-situ automatic observations of ice thickness of seas

2012 ◽  
Vol 19 (3) ◽  
pp. 583-592 ◽  
Author(s):  
Yinke Dou ◽  
Xiaomin Chang
Keyword(s):  
Sea Ice ◽  
New Technologies ◽  
Capacitive Sensor ◽  
Automatic Monitoring ◽  
Ice Thickness ◽  
In Situ Observation ◽  
Glacier Surface ◽  
Sea Ice Thickness ◽  
Surface Ice

Abstract Ice thickness is one of the most critical physical indicators in the ice science and engineering. It is therefore very necessary to develop in-situ automatic observation technologies of ice thickness. This paper proposes the principle of three new technologies of in-situ automatic observations of sea ice thickness and provides the findings of laboratory applications. The results show that the in-situ observation accuracy of the monitor apparatus based on the Magnetostrictive Delay Line (MDL) principle can reach ±2 mm, which has solved the “bottleneck” problem of restricting the fine development of a sea ice thermodynamic model, and the resistance accuracy of monitor apparatus with temperature gradient can reach the centimeter level and research the ice and snow substance balance by automatically measuring the glacier surface ice and snow change. The measurement accuracy of the capacitive sensor for ice thickness can also reach ±4 mm and the capacitive sensor is of the potential for automatic monitoring the water level under the ice and the ice formation and development process in water. Such three new technologies can meet different needs of fixed-point ice thickness observation and realize the simultaneous measurement in order to accurately judge the ice thickness.

scholarly journals Pelagic deep-sea fauna observed on video transects in the southern Norwegian Sea

Polar Biology ◽  
2021 ◽  
Author(s):  
Philipp Neitzel ◽  
Aino Hosia ◽  
Uwe Piatkowski ◽  
Henk-Jan Hoving
Keyword(s):  
First Record ◽  
Observation System ◽  
In Situ Observation ◽  
Norwegian Sea ◽  
Video Recordings ◽  
In Situ Observations ◽  
Abundance And Distribution ◽  
Oceanic Food Webs ◽  
Deep Sea Fauna

AbstractObservations of the diversity, distribution and abundance of pelagic fauna are absent for many ocean regions in the Atlantic, but baseline data are required to detect changes in communities as a result of climate change. Gelatinous fauna are increasingly recognized as vital players in oceanic food webs, but sampling these delicate organisms in nets is challenging. Underwater (in situ) observations have provided unprecedented insights into mesopelagic communities in particular for abundance and distribution of gelatinous fauna. In September 2018, we performed horizontal video transects (50–1200 m) using the pelagic in situ observation system during a research cruise in the southern Norwegian Sea. Annotation of the video recordings resulted in 12 abundant and 7 rare taxa. Chaetognaths, the trachymedusaAglantha digitaleand appendicularians were the three most abundant taxa. The high numbers of fishes and crustaceans in the upper 100 m was likely the result of vertical migration. Gelatinous zooplankton included ctenophores (lobate ctenophores,Beroespp.,Euplokamissp., and an undescribed cydippid) as well as calycophoran and physonect siphonophores. We discuss the distributions of these fauna, some of which represent the first record for the Norwegian Sea.

scholarly journals Development of "In-situ" Observation System for Oxide Films Formed during Thermal Oxidation Using Raman Spectroscopy

1995 ◽  
Vol 81 (6) ◽  
pp. 607-612 ◽  
Author(s):  
Takayuki NARUSHIMA ◽  
Naoki KIKUCHI ◽  
Makoto MARUYAMA ◽  
Haruo ARASHI ◽  
Yuichiro NISHINA ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Thermal Oxidation ◽  
Oxide Films ◽  
Observation System ◽  
In Situ Observation

scholarly journals On the Quality of Real-Time Altimeter Gridded Fields: Comparison with In Situ Data

2009 ◽  
Vol 26 (3) ◽  
pp. 556-569 ◽  
Author(s):  
Ananda Pascual ◽  
Christine Boone ◽  
Gilles Larnicol ◽  
Pierre-Yves Le Traon
Keyword(s):  
Real Time ◽  
Sea Level ◽  
Tide Gauge ◽  
Deep Ocean ◽  
Velocity Estimation ◽  
Time Data ◽  
In Situ Data ◽  
Delayed Time

Abstract The timeliness of satellite altimeter measurements has a significant effect on their value for operational oceanography. In this paper, an Observing System Experiment (OSE) approach is used to assess the quality of real-time altimeter products, a key issue for robust monitoring and forecasting of the ocean state. In addition, the effect of two improved geophysical corrections and the number of missions that are combined in the altimeter products are also analyzed. The improved tidal and atmospheric corrections have a significant effect in coastal areas (0–100 km from the shore), and a comparison with tide gauge observations shows a slightly better agreement with the gridded delayed-time sea level anomalies (SLAs) with two altimeters [Jason-1 and European Remote Sensing Satellite-2 (ERS-2)/Envisat] using the new geophysical corrections (mean square differences in percent of tide gauge variance of 35.3%) than those with four missions [Jason-1, ERS/Envisat, Ocean Topography Experiment (TOPEX)/Poseidoninterlaced, and Geosat Follow-On] but using the old corrections (36.7%). In the deep ocean, however, the correction improvements have little influence. The performance of fast delivery products versus delayed-time data is compared using independent in situ data (tide gauge and drifter data). It clearly highlights the degradation of real-time SLA maps versus the delayed-time SLA maps: four altimeters are needed in real time to get the similar quality performance as two altimeters in delayed time (sea level error misfit around 36%, and zonal and meridional velocity estimation errors of 27% and 33%, respectively). This study proves that the continuous improvement of geophysical corrections is very important, and that it is essential to stay above a minimum threshold of four available altimetric missions to capture the main space and time oceanic scales in fast delivery products.

New Space Observation of the Global Cryosphere

2021 ◽  
Author(s):  
Zhitong Yu ◽  
Luojia Hu ◽  
Yan Huang ◽  
Rong Ma ◽  
Peng Xiao ◽  
...  
Keyword(s):  
Sea Ice ◽  
Sea Level ◽  
Rapid Change ◽  
Ice Sheets ◽  
Dynamic Monitoring ◽  
Observation System ◽  
Polar Ice ◽  
Polar Ice Sheets ◽  
New Space ◽  
Wide Swath

<p>Quantifying changes in Earth’s ice sheets and identifying the climate drivers are central to improving sea level projections. But it is a pity that the future sea level is difficult to predicted. Space observation can provide global multiscale long-term continuous monitoring data. And it is very important for understanding intrinsic mechanisms, improve models and projections and analyze the impacts on human civilization.</p><p>Several satellites are applied for Global Cryosphere Watch, including sea ice extent and concentration, ice sheet elevation, glacier area and velocity. Although there are many variable can be measured by satellite sensors. But several variables need to improve the observing capability and developing new methods. Such as snow depth on ice, ice sheets thickness, and permafrost parameters. China has established high-resolution earth observation system to realize stereopsis and dynamic monitoring of the lands, the oceans and the atmosphere.</p><p>Currently, Qian Xuesen Laboratory working together with Sun Yat-sen University, is trying to design a new space observation system to support Three Poles Environment and Climate Changes project. We are conceptualizing two series satellites including FluxSats and BingSats for carbon/water cycle and cryosphere observations, respectively. To clarify the mechanism of the cryosphere carbon release and carbon sink effects of the oceans and ecosystems. We are developing a new lidar system for detecting the concentration and wind speed, and then atmospheric boundary layer flux exchange can be estimated. To understand the rapid change of the sea ice, such as drift, fragmentation and freeze. We need a short revisit and wide swath system capabilities. InSAR technology gives the digitial elevation of the ice surface. And temporal difference InSAR (DInSAR) shows the changes of elevation. BingSAT-Tomographic Observation of Polar Ice Sheets (TOPIS) achieves the tomographic observation of polar ice sheets with a wide swath and short revisit time. Over the polar regions, the CubeSats form a large cross-track baseline with the master satellite to realize the high two-dimensional spatial resolution with the along-track synthetic aperture. The MirrorSAR technology is utilized in BingSat-TOPIS to achieve time and phase synchronization more economically than the traditional bistatic radar. Sparse array and digital beamforming are also considered to significantly reduce the number of microsatellites, and achieve tomographic images of polar ice sheets.</p>

scholarly journals In Situ Rubber-Wheel Contact on Road Surface Using Ultraviolet-Induced Fluorescence Method

2020 ◽  
Vol 10 (24) ◽  
pp. 8804
Author(s):  
Jhonni Rahman ◽  
Yutaka Shoukaku ◽  
Tomoaki Iwai
Keyword(s):  
Contact Area ◽  
High Speed ◽  
High Sensitivity ◽  
Dynamic Contact ◽  
Road Surface ◽  
Oxide Semiconductor ◽  
Small Scale ◽  
In Situ Observation ◽  
On The Road

This study examines the relationship between rubber-wheel and the contact area on the road surface. Ultraviolet-induced fluorescence microscopy was used to observe and measure the contact parts with pyranine as a dye solution. The high sensitivity to U.V. light makes it easy to distinguish contact and non-contact regions on a very small scale. The experiment was conducted in static and dynamic conditions to identify its influence on the apparent contact area of rubber-wheel and road surface. The in-situ observation of the contact area was captured and recorded using a high-speed digital camera with 1-inch a CMOS (complementary metal oxide semiconductor) sensor. Additionally, the contact area between rubber-wheel and road surface was measured using an analyzing software. The results show differences in static and dynamic contact conditions based on the operating parameters.

Sign in / Sign up

Export Citation Format

Share Document