Salt activity and diapirism during the Paleogene in the Baronnies Orientales (South-East basin, France) : paleogeographic and structural implications.

Author(s):  
Alexandre Hamon ◽  
Caroline Mehl ◽  
Damien Huyghe ◽  
Sidonie Révillon ◽  
Jean-Paul Callot

<p>The external Alps record a whole Wilson cycle that began at early Mesozoïc times by an extensional phase leading to the deposition of thick marine deposits upon an upper Triassic basement including a thick salt layer. Several diapiric structures (e.g. Astoin, the Barre de Chine ; Célini et al., 2020) are the witnesses of this important salt activity during deposition and the subsequent deformation through the Lower Jurassic. Otherwise, Triassic salt allowed thrusting on several decollement levels and emplacement of major thrusted units, such as the “Nappe de Digne” or the Authon thrust sheet, during the alpine phase s.s, initiated at the Oligocene-Miocene boundary. Between these two periods, the external Alps story is more uncertain and none salt activity has been clearly demonstrated except westwards in the Vocontian basin. In the whole South-East basin, only few clues, as bipyramidal quartz found in Priabonian deposits in the western Baronnies suggest a potential salt activity at surface during the Paleogene. However, in the St-Geniez areas, some Oligocene sediments, located at the vicinity of salt structures suggest a potential diapiric growth during this period. Indeed, some stratigraphic gypsum beds are found in an Oligocene lacustrine series, directly thrusted by the Authon thrust sheet.  None evaporite environments are described in the whole region at Oligocene times, which suggest a possible recycling of Triassic evaporites.</p><p>In order to determine if theses deposits are related to a Paleogene salt activity, a multi-analytical approach was used. First, a field study allowed characterizing the facies and the sedimentary filling and defining the stress regime during the deposit, by kinematic inversion on fractures which indicates a constant N-S compression during the Oligocene. The presence of halophilic fauna at the base of the lacustrine series of the St-Geniez area attests for saline influences during deposit. Moreover, 4km to the SW, a wedge in the conglomerates of the alpine continental molasse (so called red molasse) resting directly on Sorine’s Triassic diapir was put forward. Cargneules and dolomites from the Triassic constitute an important part of the reworked material. These observations indicate that the Sorine's diapir was active during the deposition of the Oligocene series. Then, a precise chemostratigraphic framework was determined by use of δ<sup>13</sup>C and δ<sup>18</sup>O isotopic data on the lacustrine limestones. <sup>87</sup>Sr/<sup>86</sup>Sr isotopic ratio on gypsum beds of the lacustrine series aimed at determining their ages and a possible Triassic evaporite sourcing. Our results gave an age ranging from 6 to 23 Ma, which does not correspond with the Oligocene age of the overlying and underlying sediments. Moreover, the large variation in isotope ratios suggests that this gypsum did not come from primary precipitation but from leaching of a pre-existing evaporite source. In conclusion, field observations, together with geochemical analyses, made it possible to highlight the relationships between tectonics, salt tectonics and sedimentation and also to reconstruct the paleogeography of the region at the end of the Paleogene.</p><p> </p><p><em>References</em></p><p><em>Célini, N., Callot, J.P., Ringenbach, J.C., Graham, R. (2020,). Jurassic salt tectonics in the SW sub-Alpine fold and thrust belt. Tectonics</em></p><p> </p>

2019 ◽  
Vol 132 (5-6) ◽  
pp. 997-1012 ◽  
Author(s):  
Michael R. Hudec ◽  
Tim P. Dooley ◽  
Frank J. Peel ◽  
Juan I. Soto

Abstract Passive-margin salt basins tend to be much more deformed than their nonsalt equivalents, but they are by no means all the same. We used seismic data to study the Salina del Bravo region, northeast Mexico, to investigate the ways in which margin configuration and postsalt uplift history can influence passive-margin salt tectonics. The Salina del Bravo area contains four main structural systems, all of which trend NNE across the entire region. These structures are the Bravo trough, Sigsbee salt canopy, Perdido fold-and-thrust belt, and BAHA high. Gravity-driven deformation did not begin until more than 130 m.y. after salt deposition, because of buttressing against the BAHA high. We suggest that deformation was ultimately triggered in the Cenozoic by Cordilleran uplift that tilted the margin seaward and created a major sediment source terrane. Sediments shed from the uplift expelled salt seaward to form the Sigsbee canopy. At the same time, tilted and loaded sediments were translated seaward on the Louann salt until they were buttressed against the BAHA high, forming the Perdido fold-and-thrust belt. A physical model was built to test this hypothesis. The model was able to reproduce most of the major structures in the region, suggesting that the hypothesis is reasonable. The Salina del Bravo region shows how a downdip buttress can inhibit gravity-driven salt deformation in passive-margin salt basins. Furthermore, the area also shows the importance of postsalt uplift, which can destabilize a margin through a combination of tilting and sedimentation.


2019 ◽  
Vol 108 (5) ◽  
pp. 1595-1614 ◽  
Author(s):  
Z. Schleder ◽  
D. M. Tamas ◽  
C. Krezsek ◽  
K. Arnberger ◽  
A. Tulucan

2002 ◽  
Vol 173 (6) ◽  
pp. 523-532 ◽  
Author(s):  
Bernard Peybernès ◽  
Marie-José Fondecave-Wallez ◽  
Pierre-Jean Combes

Abstract Recently, have been evidenced in central/eastern French Pyrenees sub-marine polygenic breccias (Comus/Baixas Breccias), assigned to Upper Danian-Lower Selandian (P1c-P3) by means of planktonic foraminifera found either within their matrix, or within associated microrhythmic hemipelagites. These ante-Upper Eocene breccias, which are posterior to the HT-LP « Pyrenean » metamorphism (Mid.-Cretaceous in age and characterized by dipyre-bearing marbles and hornfelses) and to the Upper to Uppermost Cretaceous foldings, are only restricted to the Cretaceous orogenic axis of the range [Internal Metamorphic Zone (IMZ) and North-Pyrenean Zone (NPZ)]. They are dated in about 20 layers known from Mediterranean coast to Garonne valley. The breccias define in this part of Pyrenees a wide and long (more than 200 km) W-E trough (subdivided into several meridian palaeocanyons) inherited from former karstic topographies and separated by mountains with a steep topography, flanked to the South and the North of continental areas (covered by « Vitrollian » fluvio-lacustrine deposits). It was important to evidence if this marine breccia-filled « trough », Palaeocene in age, could extend westwards, West of Garonne, in Comminges/Barousse and Bigorre, where, laterally, the « Vitrollian » continental areas are replaced by outer-shelf marine sediments (clinoform carbonates), both covering the Sub-Pyrenean Zone (SPZ) and the High Primary Range (HPR) (Gavarnie-Mont-Perdu thrust sheet). In fact, the presence of those breccias has been already suggested (but without micropalaeontologic arguments) by Mattauer [in Choukroune, 1969 and 1976] in the Lourdes area (Bigorre). The topic of this paper is to characterize and to assign to the lower part of Palaeocene (63-59 Ma interval) several significant outcrops (St-Béat, Bramevaque/Troubat/Gembrié, Lortet, Medous/Bagnères-de-Bigorre and Lourdes/Pibeste) of these marine breccias (some of them previously used as black/yellow marbles called « Brèche romaine de St-Béat », « Portor des Pyrénées » or « Marbres de Medous ») recently identified from Garonne to Gave-de-Pau (fig. 1). Although quite poor in argillaceous hemipelagites, most of the breccias (which contain Mesozoic clasts) are now well dated by sections of « globigerinids » (= superfamily of Globerinacea) observed within their matrix. Other marine Palaeocene breccias also exist, more to the South (col de Gembre) along segments of the North-Pyrenean Fault, but they only rework Palaeozoic clasts. The « globigerinid » assemblage checked within all the Palaeocene breccias of Comminges/Bigorre includes, as more to the east, the following taxa: Globanomalina compressa, Gl. ehrenbergi, Gl. imitata, Parasubbotina varianta, P. variospira, Igorina pusilla, Morozovella angulata, M. praeangulata, Praemurica spiralis, Pr. inconstans and Woodringina hornestownensis. This assemblage is also laterally present within the marine carbonate sequences of the SPZ – HCR cover (« Lasseube Limestones » from the Nay/Pont Labau area, « Globigerinid-bearing Limestones » from the Gavarnie-Mont-Perdu thrust sheet), regions which are peripheric to the Pyrenean Lower/Mid. Cretaceous orogen (IMZ, NPZ) because exempt of major angular unconformity between Maastrichtian and Danian marine deposits (only a short gap of Lower/Lowermost Danian underlines the K/T boundary). On the contrary, the herein studied regions, belonging to this orogen, are characterized by a clear unconformity (both angular and cartographic) along a well-marked ravining surface inherited from erosional processes and karstification. The substratum of these breccias is strongly folded, cleaved and sometimes metamorphic and its younger formation seems to be Mid.– Cretaceous in age at least. Thus, it is very probable that the ante-Palaeocene unconformity seals compressional/transpressional structures (followed by emersions) assigned to the Uppermost Cretaceous phase (palinspastic transect, fig. 5). Danian/Selandian marine breccias and their already folded Mesozoic substratum are later tectonically reactived together by the « Pyrenean » compressions, Upper Eocene in age. If the elements of these breccias sometimes correspond to marbles induced by the Mid.-Cretaceous thermometamorphism (as around the famous « Etang de Lherz », more to the East, where lherzolites are also reworked in similar Danian/Selandian breccias), their matrix locally contain neogenic phyllites (never dipyre !) which could be related to a light (hydrothermal ?) post-breccia metamorphism. The clasts are generally angular, showing a very short transport from emerged steep topographies separating the different elementary canyons of the trough. The last problem is to determine the eventual westwards extension in the Bearn and Basque Pyrenees (fig. 6), particularly in the « Chaînons Béarnais » Zone which belonged to the North-Iberian palaeomargin (Iberian Plate) of the future range during Lower/Mid.-Cretaceous times. At this first level of micropalaeontologic investigations, it seems that several breccias (Lauriolle, Etchebar, Bosmendiette etc …), previously interpreted by several authors (synthesis in James and Canerot [1999]) as Aptian and « diapiric » (collapse) breccias, should be assigned to marine Palaeocene deposits because containing (in their matrix and associated hemipelagites) Danian-Selandian planktonic foraminifera similar to the Comminges/Bigorre ones.


2021 ◽  
Author(s):  
David Cruset ◽  
Jaume Vergés ◽  
Anna Tarvé

<p>Recently, U-Pb dating of fracture-filling carbonates has revealed as a powerful tool to constrain the absolute timing of deformation in fold and thrust belts. However, geochronological studies of these minerals have to be combined with petrological observations and geochemical analyses to decipher if measured dates document fluid flow synchronously to deformation or post-kinematic events.</p><p>The Pyrenean compressional belt formed from Late Cretaceous to Oligocene due to the stacking of three thrust sheets and a deformed foreland basin. From top-and-older to bottom-and-younger, these consist of the Bóixols-Upper Pedraforca, Lower Pedraforca and Cadí thrust sheets and the Ebro foreland basin. Here, we quantify the duration of thrust sheet emplacement and shortening rates in the SE Pyrenees using U-Pb dating of 43 calcites filling fractures and interparticle porosity.</p><p>Four fracture sets related to compressional tectonics and one set related to extension are identified. The compressive sets include: 1) N-S, NNW-SSE and NNE-SSW trending veins; 2) E-W trending folding-related veins; 3) E-W trending reverse faults; and 4) NW-SE and NE-SW trending strike-slip faults. Fractures related to extension are NNW-SSE and NW-SE trending normal faults.</p><p>Elongated blocky, blocky and bladed calcite textures of the dated cements are observed. Elongated textures are observed in reverse, strike-slip and normal faults and occasionally in N-S, NNW-SSE and NNE-SSW and E-W veins. In these fractures, calcite crystals are arranged parallel, oblique, or perpendicular to fracture walls and provide evidence for syn-kinematic growth. Blocky and bladed textures have been identified in N-S, NNW-SSE and NNE-SSW veins, E-W folding-related veins, reverse and strike-slip faults and in calcite precipitated between sedimentary breccia clasts. Although these textures indicate precipitation after vein opening or at lower rates than vein opening, their presence in crack-seal veins and in stepped slickensides also indicates syn-kinematic growth. Moreover, clumped isotope temperatures measured in several blocky and bladed calcites precipitated in veins and faults indicate that most of them precipitated from fluids in thermal disequilibrium with host rocks, revealing rapid fluid flow and precipitation just after fracturing. Contrarily, low temperatures measured in blocky and bladed calcite precipitated in the interparticle porosity of sedimentary breccias indicate late fluid migration.</p><p>U-Pb dating applied to fracture-filling calcites in the SE Pyrenean fold and thrust belt yielded 46 ages from 70.6 ± 0.9 Ma to 2.8 ± 1.8 Ma (Cruset et al., 2020). The results reveal minimum durations for the emplacement of each thrust sheet (18.7 Myr for the Bóixols-Upper Pedraforca, 11.6 Myr for the Lower Pedraforca and 14.3 Myr for the Cadí), and that piggy-back thrusting was accompanied by post-emplacement deformation of upper thrust units above the lower ones during tectonic transport. These estimated durations, combined with the minimum shortening established for the Bóixols-Upper Pedraforca, Lower Pedraforca and Cadí thrust sheets by other methods, allows calculating shortening rates of 0.6 mm/yr, 3.1 mm/yr and 1.1 mm/yr, respectively. Finally, the results also reveal the development of local normal faults at late Oligocene times during the final stages of compression and exhumation.</p><p><strong>References:</strong></p><p><strong>Cruset et al. (2020)</strong>. Geological Society of London. 177, 1186-1196.</p>


2021 ◽  
Author(s):  
Pablo Granado ◽  
Pablo Santolaria ◽  
Elizabeth Wilson ◽  
Oriol Ferrer ◽  
Josep Anton Muñoz

<p>Salt and related structures have a strong influence on the formation of extensional basins during lithospheric stretching and thermal subsidence at rifted margins. Salt significantly influences as well the structural styles and kinematics of fold-and-thrust belts. We aim to characterize the structure of inverted minibasins and salt-influenced fold-and-thrust belts, but the challenge is to understand, and to match, the present day contractional structures with reasonable pre-orogenic configurations. Yet, we still lack proper understanding on the development of these salt-sediment systems and particularly, how salt tectonics is initially triggered and evolves through space and time. Two fundamental triggering mechanisms on rift to passive margin salt tectonics are known: (1) extension by gravitational collapse, and (2) differential loading. Key questions are: do these mechanisms occur at the same time or does one commonly follow the other? Which one is first and which one dominates? Does it depend on the location and timing of deformation on the passive margin? Which are the stratigraphic evidences and structural geometries that may help us to answer these questions? Recognizing the initial structural geometries of these minibasins once they have been incorporated into a fold and thrust belt is challenging but of paramount importance.</p><p>In this contribution we address some of these questions by showing a brief historical review of concepts and show end-member analogue models of fold-and-thrust belts developed from the inversion and incorporation of rift to passive margin salt basins. Our work is inspired by field observations from the Pyrenees and the Northern Calcareous Alps, as well as from present day continental margins.</p>


1988 ◽  
Vol 25 (10) ◽  
pp. 1608-1617 ◽  
Author(s):  
L. C. Struik

Quesnel Terrane, at Quesnel Lake, consists of two regional Triassic–Jurassic age-equivalent units, the Takla–Nicola and Slocan – King Salmon assemblages, as determined from conodonts and macrofossils. The upper mainly volcanic unit (Takla–Nicola) overlies the mainly pelitic unit (Slocan – King Salmon) and was probably emplaced by thrusting. The lower unit consists of dark grey pelite, siltite, limestone, and lesser amounts of fragmental basalt and greywacke. The upper unit consists of fragmental basalt, diorite, greywacke, and lesser amounts of dark grey siltite and pelite and limestone. The unit age and stacking order suggest that during the Jurassic, the volcanic-rich thrust sheet was transported northeastward over an eastern, more pelitic facies of the terrane. The northwesterly trending thrust trace is approximately 300 km long. The Triassic and Lower Jurassic subduction-generated volcanic unit may have been deposited on sediments and volcanics equivalent to the upper Paleozoic Harper Ranch Group; the eastern Triassic and Lower Jurassic pelite unit may have been deposited on the pillow basalt and ribbon chert of the upper Paleozoic Slide Mountain Group. The upper Paleozoic Harper Ranch and Slide Mountain group rocks may have rested on attenuated North American crust.


Tectonics ◽  
2020 ◽  
Vol 39 (5) ◽  
Author(s):  
Łukasz Gągała ◽  
Lothar Ratschbacher ◽  
Jean‐Claude Ringenbach ◽  
Sofia‐Katarina Kufner ◽  
Bernd Schurr ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document