scholarly journals HydroBlocks v0.2: enabling a field-scale two-way coupling between the land surface and river networks in Earth system models

2021 ◽  
Vol 14 (11) ◽  
pp. 6813-6832
Author(s):  
Nathaniel W. Chaney ◽  
Laura Torres-Rojas ◽  
Noemi Vergopolan ◽  
Colby K. Fisher
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Surface Energy Balance ◽  
River Network ◽  
River Networks ◽  
Fine Scale ◽  
Earth System ◽  
Field Scale ◽  
Earth System Models ◽  
River Routing

Abstract. Over the past decade, there has been appreciable progress towards modeling the water, energy, and carbon cycles at field scales (10–100 m) over continental to global extents in Earth system models (ESMs). One such approach, named HydroBlocks, accomplishes this task while maintaining computational efficiency via Hydrologic Response Units (HRUs), more commonly known as “tiles” in ESMs. In HydroBlocks, these HRUs are learned via a hierarchical clustering approach from available global high-resolution environmental data. However, until now there has yet to be a river routing approach that is able to leverage HydroBlocks' approach to modeling field-scale heterogeneity; bridging this gap will make it possible to more formally include riparian zone dynamics, irrigation from surface water, and interactive floodplains in the model. This paper introduces a novel dynamic river routing scheme in HydroBlocks that is intertwined with the modeled field-scale land surface heterogeneity. Each macroscale polygon (a generalization of the concept of macroscale grid cell) is assigned its own fine-scale river network that is derived from very high resolution (∼ 30 m) digital elevation models (DEMs); the inlet–outlet reaches of a domain's macroscale polygons are then linked to assemble a full domain's river network. The river dynamics are solved at the reach-level via the kinematic wave assumption of the Saint-Venant equations. Finally, a two-way coupling between each HRU and its corresponding fine-scale river reaches is established. To implement and test the novel approach, a 1.0∘ bounding box surrounding the Atmospheric Radiation and Measurement (ARM) Southern Great Plains (SGP) site in northern Oklahoma (United States) is used. The results show (1) the implementation of the two-way coupling between the land surface and the river network leads to appreciable differences in the simulated spatial heterogeneity of the surface energy balance, (2) a limited number of HRUs (∼ 300 per 0.25∘ cell) are required to approximate the fully distributed simulation adequately, and (3) the surface energy balance partitioning is sensitive to the river routing model parameters. The resulting routing scheme provides an effective and efficient path forward to enable a two-way coupling between the high-resolution river networks and state-of-the-art tiling schemes in ESMs.

scholarly journals Two-way coupling between the sub-grid land surface and river networks in Earth system models

2020 ◽  
Author(s):  
Nathaniel W. Chaney ◽  
Laura Torres-Rojas ◽  
Noemi Vergopolan ◽  
Colby K. Fisher
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Environmental Data ◽  
Added Value ◽  
Earth System ◽  
Field Scale ◽  
System Models ◽  
Routing Scheme ◽  
Earth System Models ◽  
River Routing

Abstract. Over the past decade, there has been appreciable progress towards modeling the water, energy, and carbon cycles at field-scales (10–100 m) over continental to global extents. One such approach, named HydroBlocks, accomplishes this task while maintaining computational efficiency via sub-grid tiles, or Hydrologic Response Units (HRUs), learned via a hierarchical clustering approach from available global high-resolution environmental data. However, until now, there has yet to be a macroscale river routing approach that is able to leverage HydroBlocks' approach to sub-grid heterogeneity, thus limiting the added value of field-scale land surface modeling in Earth System Models (e.g., riparian zone dynamics, irrigation from surface water, and interactive floodplains). This paper introduces a novel dynamic river routing scheme in HydroBlocks that is intertwined with the modeled field-scale land surface heterogeneity. The primary features of the routing scheme include: 1) the fine-scale river network of each macroscale grid cell's is derived from very high resolution (

Rethinking large scale river routing by leveraging a field-scale resolving land surface model

2020 ◽  
Author(s):  
Nathaniel Chaney ◽  
Noemi Vergopolan ◽  
Colby Fisher
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Land Surface Model ◽  
Added Value ◽  
Surface Model ◽  
Earth System ◽  
Field Scale ◽  
Routing Scheme ◽  
Earth System Models ◽  
River Routing

<p>Over the past decade there has been important progress towards modeling the water, energy, and carbon cycles at field scales (10-100 meter) over continental extents. One such approach, named HydroBlocks, accomplishes this task while maintaining computational efficiency via sub-grid hydrologic response units (HRUs); these HRUs are defined via cluster analysis of available field-scale environmental datasets (e.g., elevation). However, until now, there has yet to be complementary advances in river routing schemes that are able to fully harness HydroBlocks’ approach to sub-grid heterogeneity, thus limiting the added value of field-scale resolving land surface models (e.g., riparian zone dynamics, irrigation from surface water, and interactive floodplains). In this presentation, we will introduce a novel large scale river routing scheme that leverages the modeled field-scale heterogeneity in HydroBlocks through more realistic sub-grid stream network topologies, reach-based river routing, and the simulation of floodplain dynamics.</p><p>The primary features of the novel river routing scheme include: 1) each macroscale grid cell is assigned its own river network delineated from field-scale DEMs; 2) similar sub-grid reaches (e.g., Shreve order) are grouped/clustered to ensure computational tractability; 3) the fine-scale inlet/outlet reaches of the macroscale grid cells are linked to assemble the continental river networks; 4) river dynamics are solved at the reach-level via an implicit solution of the Kinematic wave with floodplain dynamics; 5) two way connectivity is established between each cell’s sub-grid HRUs and the river network. The resulting routing scheme is able to effectively represent sub-100 meter-delineated stream networks within Earth system models with relatively minor increases in computation with respect to existing approaches. To illustrate the scheme’s novelty when coupled to the HydroBlocks land surface model, we will present simulation results over the Yellowstone river in the United States between 2002 and 2018. We will show the added value of the scheme when compared to existing approaches with regards to floodplain dynamics, water management, and riparian corridors. Furthermore, we will present results regarding the scheme’s computational tractability to ensure the feasibility of its use within Earth system models. Finally, we will discuss the potential of this approach to enhance flood and drought monitoring tools, numerical weather prediction, and climate models.</p>

scholarly journals Use of various remote sensing land cover products for PFT mapping over Siberia

2013 ◽  
Vol 6 (1) ◽  
pp. 255-296
Author(s):  
C. Ottlé ◽  
J. Lescure ◽  
F. Maignan ◽  
B. Poulter ◽  
T. Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Cover ◽  
Land Surface ◽  
Land Cover Classification ◽  
Classification Systems ◽  
Tree Cover ◽  
Surface Model ◽  
Earth System ◽  
System Models ◽  
Earth System Models

Abstract. High-latitude ecosystems play an important role in the global carbon cycle and in regulating the climate system and are presently undergoing rapid environmental change. Accurate land cover datasets are required to both document these changes as well as to provide land-surface information for benchmarking and initializing earth system models. Earth system models also require specific land cover classification systems based on plant functional types, rather than species or ecosystems, and so post-processing of existing land cover data is often required. This study compares over Siberia, multiple land cover datasets against one another and with auxiliary data to identify key uncertainties that contribute to variability in Plant Functional Type (PFT) classifications that would introduce errors in earth system modeling. Land cover classification systems from GLC 2000, GlobCover 2005 and 2009, and MODIS collections 5 and 5.1 are first aggregated to a common legend, and then compared to high-resolution land cover classification systems, continuous vegetation fields (MODIS-VCF) and satellite-derived tree heights (to discriminate against sparse, shrub, and forest vegetation). The GlobCover dataset, with a lower threshold for tree cover and taller tree heights and a better spatial resolution, tends to have better distributions of tree cover compared to high-resolution data. It has therefore been chosen to build new PFTs maps for the ORCHIDEE land surface model at 1 km scale. Compared to the original PFT dataset, the new PFT maps based on GlobCover 2005 and an updated cross-walking approach mainly differ in the characterization of forests and degree of tree cover. The partition of grasslands and bare soils now appears more realistic compared with ground-truth data. This new vegetation map provides a framework for further development of new PFTs in the ORCHIDEE model like shrubs, lichens and mosses, to better represent the water and carbon cycles in northern latitudes. Updated land cover datasets are critical for improving and maintaining the relevance of earth system models for assessing climate and human impacts on biogeochemistry and biophysics. The new PFT map at 5 km scale is available for download from the PANGAEA website, at: doi:10.1594/PANGAEA.810709.

scholarly journals The multiscale routing model mRM v1.0: simple river routing at resolutions from 1 to 50 km

2019 ◽  
Vol 12 (6) ◽  
pp. 2501-2521 ◽  
Author(s):  
Stephan Thober ◽  
Matthias Cuntz ◽  
Matthias Kelbling ◽  
Rohini Kumar ◽  
Juliane Mai ◽  
...  
Keyword(s):  
High Resolution ◽  
Spatial Resolution ◽  
Land Surface ◽  
Hydrologic Model ◽  
River Network ◽  
Time Stepping ◽  
Danube Catchment ◽  
Adaptive Time ◽  
Adaptive Time Stepping ◽  
River Routing

Abstract. Routing streamflow through a river network is a fundamental requirement to verify lateral water fluxes simulated by hydrologic and land surface models. River routing is performed at diverse resolutions ranging from few kilometres to 1∘. The presented multiscale routing model mRM calculates streamflow at diverse spatial and temporal resolutions. mRM solves the kinematic wave equation using a finite difference scheme. An adaptive time stepping scheme fulfilling a numerical stability criterion is introduced in this study and compared against the original parameterisation of mRM that has been developed within the mesoscale hydrologic model (mHM). mRM requires a high-resolution river network, which is upscaled internally to the desired spatial resolution. The user can change the spatial resolution by simply changing a single number in the configuration file without any further adjustments of the input data. The performance of mRM is investigated on two datasets: a high-resolution German dataset and a slightly lower resolved European dataset. The adaptive time stepping scheme within mRM shows a remarkable scalability compared to its predecessor. Median Kling–Gupta efficiencies change less than 3 % when the model parameterisation is transferred from 3 to 48 km resolution. mRM also exhibits seamless scalability in time, providing similar results when forced with hourly and daily runoff. The streamflow calculated over the Danube catchment by the regional climate model REMO coupled to mRM reveals that the 50 km simulation shows a smaller bias with respect to observations than the simulation at 12 km resolution. The mRM source code is freely available and highly modular, facilitating easy internal coupling in existing Earth system models.

scholarly journals The multiscale Routing Model mRM v1.0: simple river routing at resolutions from 1 to 50 km

2019 ◽  
Author(s):  
Stephan Thober ◽  
Matthias Cuntz ◽  
Matthias Kelbling ◽  
Rohini Kumar ◽  
Juliane Mai ◽  
...  
Keyword(s):  
High Resolution ◽  
Spatial Resolution ◽  
Land Surface ◽  
Climate Model ◽  
Hydrologic Model ◽  
River Network ◽  
Time Step ◽  
Danube Catchment ◽  
Adaptive Time ◽  
River Routing

Abstract. Routing streamflow through a river network is a fundamental requirement to verify lateral water fluxes simulated by hydrologic and land surface models. River routing is performed at diverse resolutions ranging from few kilometers to around 1°. The presented multiscale Routing Model mRM calculates streamflow at diverse spatial and temporal resolutions. mRM solves the kinematic wave equation using a finite difference scheme. An adaptive time stepping scheme fulfilling a numerical stability criteria is introduced in this study and compared against the original parametrization of mRM that has been developed within the mesoscale Hydrologic Model (mHM). mRM requires a high-resolution river network, which is upscaled internally to the desired spatial resolution. The user can change the spatial resolution by simply changing one number in the configuration file without any further adjustments of the input data. The performance of mRM is investigated on two datasets: a high-resolution German dataset and a slightly lower resolution European dataset. The adaptive time step scheme within mRM shows a remarkable scalability compared to its predecessor. Median Kling-Gupta efficiencies change less than 3 percent when the model parametrization is transferred from 3 to 48 km resolution. mRM also exhibits seamless scalability in time, providing identical results when forced with hourly and daily runoff. The streamflow calculated over the Danube catchment by the Regional Climate Model REMO coupled to mRM is comparable at 25 and 50 km resolution. The mRM source code is freely available and highly modular facilitating an easy internal coupling in existing Earth System Models.

scholarly journals A subbasin-based framework to represent land surface processes in an Earth System Model

2013 ◽  
Vol 6 (2) ◽  
pp. 2699-2730 ◽  
Author(s):  
H.-Y. Li ◽  
M. Huang ◽  
T. Tesfa ◽  
Y. Ke ◽  
Y. Sun ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
System Model ◽  
Surface Processes ◽  
Earth System ◽  
Land Surface Models ◽  
Land Surface Processes ◽  
Surface Models ◽  
Earth System Models ◽  
Grid Based

Abstract. Realistically representing spatial heterogeneity and lateral land surface processes within and between modeling units in earth system models is important because of their implications to surface energy and water exchanges. The traditional approach of using regular grids as computational units in land surface models and earth system models may lead to inadequate representation of subgrid heterogeneity and lateral movements of water, energy and carbon fluxes, especially when the grid resolution increases. Here a new subbasin-based framework is introduced in the Community Land Model (CLM), which is the land component of the Community Earth System Model (CESM). Local processes are represented assuming each subbasin as a grid cell on a pseudo grid matrix with no significant modifications to the existing CLM modeling structure. Lateral routing of water within and between subbasins is simulated with the subbasin version of a recently-developed physically based routing model, Model for Scale Adaptive River Routing (MOSART). As an illustration, this new framework is implemented in the topographically diverse region of the US Pacific Northwest. The modeling units (subbasins) are delineated from high-resolution Digital Elevation Models (DEMs) while atmospheric forcing and surface parameters are remapped from the corresponding high resolution datasets. The impacts of this representation on simulating hydrologic processes are explored by comparing it with the default (grid-based) CLM representation. In addition, the effects of DEM resolution on parameterizing topography and the subsequent effects on runoff processes are investigated. Limited model evaluation and comparison showed that small difference between the averaged forcing can lead to more significant difference in the simulated runoff and streamflow because of nonlinear lateral processes. Topographic indices derived from high resolution DEMs may not improve the overall water balance, but affect the partitioning between surface and subsurface runoff. More systematic analyses are needed to determine the relative merits of the subbasin representation compared to the commonly used grid-based representation, especially when land surface models are approaching higher resolutions.

scholarly journals A New Global Storage‐Area‐Depth Data Set for Modeling Reservoirs in Land Surface and Earth System Models

2018 ◽  
Vol 54 (12) ◽  
Author(s):  
Wondmagegn Yigzaw ◽  
Hong‐Yi Li ◽  
Yonas Demissie ◽  
Mohamad I. Hejazi ◽  
L. Ruby Leung ◽  
...  
Keyword(s):  
Land Surface ◽  
Earth System ◽  
Data Set ◽  
System Models ◽  
Depth Data ◽  
Storage Area ◽  
Earth System Models

scholarly journals ORCHIDEE-ROUTING: A new river routing scheme using a high resolution hydrological database

2018 ◽  
Author(s):  
Trung Nguyen-Quang ◽  
Jan Polcher ◽  
Agnès Ducharne ◽  
Thomas Arsouze ◽  
Xudong Zhou ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
River Flow ◽  
Anthropogenic Impacts ◽  
Computational Cost ◽  
Land Surface Model ◽  
Surface Model ◽  
Routing Scheme ◽  
Wide Range ◽  
River Routing

Abstract. This study presents a revised river routing scheme (RRS) for the Organising Carbon and Hydrology in Dynamic Ecosystems (ORCHIDEE) land surface model. The revision is carried out to benefit from the high resolution topography provided the Hydrological data and maps based on SHuttle Elevation Derivatives at multiple Scales (HydroSHEDS), processed to a resolution of approximately 1 kilometer. The RRS scheme of the ORCHIDEE uses a unit-to-unit routing concept which allows to preserve as much of the hydrological information of the HydroSHEDS as the user requires. The evaluation focuses on 12 rivers of contrasted size and climate which contribute freshwater to the Mediterranean Sea. First, the numerical aspect of the new RRS is investigated, to identify the practical configuration offering the best trade-off between computational cost and simulation quality for ensuing validations. Second, the performance of the revised scheme is evaluated against observations at both monthly and daily timescales. The new RRS captures satisfactorily the seasonal variability of river discharges, although important biases come from the water budget simulated by the ORCHIDEE model. The results highlight that realistic streamflow simulations require accurate precipitation forcing data and a precise river catchment description over a wide range of scales, as permitted by the new RRS. Detailed analyses at the daily timescale show promising performances of this high resolution RRS for replicating river flow variation at various frequencies. Eventually, this RRS is well adapted for further developments in the ORCHIDEE land surface model to assess anthropogenic impacts on river processes (e.g. damming for irrigation operation).

Disentangeling the shortwave surface energy balance in earth system models

2021 ◽  
Author(s):  
Kine Onsum Moseid
Keyword(s):  
Energy Balance ◽  
Surface Energy ◽  
Atmospheric Aerosols ◽  
Surface Energy Balance ◽  
Coupled Model ◽  
Shortwave Radiation ◽  
Earth System ◽  
System Models ◽  
Aerosol Forcing ◽  
Earth System Models

<p>The Earth’s surface energy balance is heavily affected by incoming solar radiation and how it propagates through our atmosphere. How the sunlight propagates towards the surface depends on the atmospheric presence of aerosols, gases, and clouds. </p><p>Surface temperature evolution according to earth system models (ESMs) in the historical experiment from the coupled model intercomparison project phase 6 (CMIP6) suggests that models may be overly sensitive to aerosol forcing. Other studies have found that ESMs do not recreate observed decadal patterns in surface shortwave radiation - suggesting the models inaccurately underestimate the shortwave impact of atmospheric aerosols. These contradictory results act as a basis for our study.<br>Our study decomposes what determines both all sky and clear sky downwelling shortwave radiation at the surface in ESMs, using different experiments of CMIP6. We try to determine the respective role of aerosols, clouds and gases in the shortwave energy balance at the surface, and assess the effect of seasonality and regional differences.</p>

Sign in / Sign up

Export Citation Format

Share Document