scholarly journals ALGORITHM FOR THE AUTOMATIC ESTIMATION OF AGRICULTURAL TREE GEOMETRIC PARAMETERS USING AIRBORNE LASER SCANNING DATA

2016 ◽  
Vol XLI-B8 ◽  
pp. 629-632 ◽  
Author(s):  
E. Hadaś ◽  
A. Borkowski ◽  
J. Estornell
Keyword(s):  
Laser Scanning ◽  
Tree Height ◽  
Field Measurements ◽  
Point Clouds ◽  
Average Density ◽  
Geometric Parameters ◽  
Airborne Laser Scanning ◽  
Maximum Height ◽  
Airborne Laser ◽  
Crown Base Height

The estimation of dendrometric parameters has become an important issue for the agricultural planning and management. Since the classical field measurements are time consuming and inefficient, Airborne Laser Scanning (ALS) data can be used for this purpose. Point clouds acquired for orchard areas allow to determine orchard structures and geometric parameters of individual trees. In this research we propose an automatic method that allows to determine geometric parameters of individual olive trees using ALS data. The method is based on the α-shape algorithm applied for normalized point clouds. The algorithm returns polygons representing crown shapes. For points located inside each polygon, we select the maximum height and the minimum height and then we estimate the tree height and the crown base height. We use the first two components of the Principal Component Analysis (PCA) as the estimators for crown diameters. The α-shape algorithm requires to define the radius parameter <i>R</i>. In this study we investigated how sensitive are the results to the radius size, by comparing the results obtained with various settings of the R with reference values of estimated parameters from field measurements. Our study area was the olive orchard located in the Castellon Province, Spain. We used a set of ALS data with an average density of 4 points&thinsp;m<sip>&minus;2</sup>. We noticed, that there was a narrow range of the <i>R</i> parameter, from 0.48&thinsp;m to 0.80&thinsp;m, for which all trees were detected and for which we obtained a high correlation coefficient (>&thinsp;0.9) between estimated and measured values. We compared our estimates with field measurements. The RMSE of differences was 0.8&thinsp;m for the tree height, 0.5&thinsp;m for the crown base height, 0.6&thinsp;m and 0.4&thinsp;m for the longest and shorter crown diameter, respectively. The accuracy obtained with the method is thus sufficient for agricultural applications.

scholarly journals ALGORITHM FOR THE AUTOMATIC ESTIMATION OF AGRICULTURAL TREE GEOMETRIC PARAMETERS USING AIRBORNE LASER SCANNING DATA

2016 ◽  
Vol XLI-B8 ◽  
pp. 629-632
Author(s):  
E. Hadaś ◽  
A. Borkowski ◽  
J. Estornell
Keyword(s):  
Laser Scanning ◽  
Tree Height ◽  
Field Measurements ◽  
Point Clouds ◽  
Average Density ◽  
Geometric Parameters ◽  
Airborne Laser Scanning ◽  
Maximum Height ◽  
Airborne Laser ◽  
Crown Base Height

The estimation of dendrometric parameters has become an important issue for the agricultural planning and management. Since the classical field measurements are time consuming and inefficient, Airborne Laser Scanning (ALS) data can be used for this purpose. Point clouds acquired for orchard areas allow to determine orchard structures and geometric parameters of individual trees. In this research we propose an automatic method that allows to determine geometric parameters of individual olive trees using ALS data. The method is based on the α-shape algorithm applied for normalized point clouds. The algorithm returns polygons representing crown shapes. For points located inside each polygon, we select the maximum height and the minimum height and then we estimate the tree height and the crown base height. We use the first two components of the Principal Component Analysis (PCA) as the estimators for crown diameters. The α-shape algorithm requires to define the radius parameter &lt;i&gt;R&lt;/i&gt;. In this study we investigated how sensitive are the results to the radius size, by comparing the results obtained with various settings of the R with reference values of estimated parameters from field measurements. Our study area was the olive orchard located in the Castellon Province, Spain. We used a set of ALS data with an average density of 4 points&thinsp;m&lt;sip&gt;&minus;2&lt;/sup&gt;. We noticed, that there was a narrow range of the &lt;i&gt;R&lt;/i&gt; parameter, from 0.48&thinsp;m to 0.80&thinsp;m, for which all trees were detected and for which we obtained a high correlation coefficient (&gt;&thinsp;0.9) between estimated and measured values. We compared our estimates with field measurements. The RMSE of differences was 0.8&thinsp;m for the tree height, 0.5&thinsp;m for the crown base height, 0.6&thinsp;m and 0.4&thinsp;m for the longest and shorter crown diameter, respectively. The accuracy obtained with the method is thus sufficient for agricultural applications.

scholarly journals Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon

2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Francisco Mauro ◽  
Andrew T. Hudak ◽  
Patrick A. Fekety ◽  
Bryce Frank ◽  
Hailemariam Temesgen ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Field Measurements ◽  
Point Clouds ◽  
Semiparametric Models ◽  
Airborne Laser Scanning ◽  
Parametric Models ◽  
Fuel Load ◽  
Forest Fuels ◽  
Airborne Laser

Airborne laser scanning (ALS) acquisitions provide piecemeal coverage across the western US, as collections are organized by local managers of individual project areas. In this study, we analyze different factors that can contribute to developing a regional strategy to use information from completed ALS data acquisitions and develop maps of multiple forest attributes in new ALS project areas in a rapid manner. This study is located in Oregon, USA, and analyzes six forest structural attributes for differences between: (1) synthetic (i.e., not-calibrated), and calibrated predictions, (2) parametric linear and semiparametric models, and (3) models developed with predictors computed for point clouds enclosed in the areas where field measurements were taken, i.e., “point-cloud predictors”, and models developed using predictors extracted from pre-rasterized layers, i.e., “rasterized predictors”. Forest structural attributes under consideration are aboveground biomass, downed woody biomass, canopy bulk density, canopy height, canopy base height, and canopy fuel load. Results from our study indicate that semiparametric models perform better than parametric models if no calibration is performed. However, the effect of the calibration is substantial in reducing the bias of parametric models but minimal for the semiparametric models and, once calibrations are performed, differences between parametric and semiparametric models become negligible for all responses. In addition, minimal differences between models using point-cloud predictors and models using rasterized predictors were found. We conclude that the approach that applies semiparametric models and rasterized predictors, which represents the easiest workflow and leads to the most rapid results, is justified with little loss in accuracy or precision even if no calibration is performed.

scholarly journals Erfassung struktureller Waldparameter mithilfe von flugzeuggetragenem Laserscanning | Deriving structural forest parameters using airborne laser scanning

2011 ◽  
Vol 162 (6) ◽  
pp. 164-170
Author(s):  
Felix Morsdorf
Keyword(s):  
Laser Scanning ◽  
Recognition Rate ◽  
Tree Height ◽  
Field Measurements ◽  
Airborne Laser Scanning ◽  
Ecosystem Research ◽  
Airborne Laser ◽  
Habitat Analysis ◽  
Ecosystem Studies ◽  
Individual Trees

Airborne laser scanning is a relatively young and precise technology to directly measure surface elevations. With today's high scanning rates, dense 3-D pointclouds of coordinate triplets (xyz) can be provided, in which many structural aspects of the vegetation are contained. The challenge now is to transform this data, as far as possible automatically, into manageable information relevant to the user. In this paper we present two such methods: the first extracts automatically the geometry of individual trees, with a recognition rate of over 70% and a systematic underestimation of tree height of only 0.6 metres. The second method derives a pixel map of the canopy density from the pointcloud, in which the spatial patterns of vegetation cover are represented. These patterns are relevant for habitat analysis and ecosystem studies. The values derived by this method correlate well with field measurements, giving a measure of certainty (R2) of 0.8. The greatest advantage of airborne laser scanning is that it provides spatially extensive, direct measurements of vegetation structure which show none of the extrapolation errors of spot measurements. A large challenge remains in integrating these new products into the user's processing chains and workflows, be it in the realm of forestry or in that of ecosystem research.

scholarly journals Airborne laser scanning applied to eucalyptus stand inventory at individual tree level

2018 ◽  
Vol 53 (12) ◽  
pp. 1373-1382 ◽  
Author(s):  
Diogo Nepomuceno Cosenza ◽  
Vicente Paulo Soares ◽  
Helio Garcia Leite ◽  
José Marinaldo Gleriani ◽  
Cibele Hummel do Amaral ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Tree Height ◽  
Point Clouds ◽  
Equation System ◽  
Airborne Laser Scanning ◽  
Tree Level ◽  
Individual Tree ◽  
Local Maxima ◽  
Airborne Laser

Abstract: The objective of this work was to evaluate the application of airborne laser scanning (ALS) to a large-scale eucalyptus stand inventory by the method of individual trees, as well as to propose a new method to estimate tree diameter as a function of the height obtained from point clouds. The study was carried out in a forest area of 1,681 ha, consisting of eight eucalyptus stands with ages varying from four to seven years. After scanning, tree heights were obtained using the local maxima algorithm, and total wood stock by summing up individual volumes. To determine tree diameters, regressions fit using data measured in the inventory plots were used. The results were compared with the estimates obtained from field sampling. The equation system proposed is adequate to be applied to the tree height data derived from ALS point clouds. The tree individualization approach by local maxima filters is efficient to estimate number of trees and wood stock from ALS data, as long as the results are previously calibrated with field data.

scholarly journals An Adaptive Surface Interpolation Filter Using Cloth Simulation and Relief Amplitude for Airborne Laser Scanning Data

2021 ◽  
Vol 13 (15) ◽  
pp. 2938
Author(s):  
Feng Li ◽  
Haihong Zhu ◽  
Zhenwei Luo ◽  
Hang Shen ◽  
Lin Li
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Superior Performance ◽  
Cloth Simulation ◽  
Cloud Data ◽  
Interpolation Filter ◽  
Landscape Characteristics ◽  
Surface Interpolation ◽  
Airborne Laser

Separating point clouds into ground and nonground points is an essential step in the processing of airborne laser scanning (ALS) data for various applications. Interpolation-based filtering algorithms have been commonly used for filtering ALS point cloud data. However, most conventional interpolation-based algorithms have exhibited a drawback in terms of retaining abrupt terrain characteristics, resulting in poor algorithmic precision in these regions. To overcome this drawback, this paper proposes an improved adaptive surface interpolation filter with a multilevel hierarchy by using a cloth simulation and relief amplitude. This method uses three hierarchy levels of provisional digital elevation model (DEM) raster surfaces with thin plate spline (TPS) interpolation to separate ground points from unclassified points based on adaptive residual thresholds. A cloth simulation algorithm is adopted to generate sufficient effective initial ground seeds for constructing topographic surfaces with high quality. Residual thresholds are adaptively constructed by the relief amplitude of the examined area to capture complex landscape characteristics during the classification process. Fifteen samples from the International Society for Photogrammetry and Remote Sensing (ISPRS) commission are used to assess the performance of the proposed algorithm. The experimental results indicate that the proposed method can produce satisfying results in both flat areas and steep areas. In a comparison with other approaches, this method demonstrates its superior performance in terms of filtering results with the lowest omission error rate; in particular, the proposed approach retains discontinuous terrain features with steep slopes and terraces.

scholarly journals Highway alignments extraction and 3D modeling from airborne laser scanning point clouds

2021 ◽  
Vol 102 ◽  
pp. 102429
Author(s):  
Yuzhou Zhou ◽  
Ronggang Huang ◽  
Tengping Jiang ◽  
Zhen Dong ◽  
Bisheng Yang
Keyword(s):  
3D Modeling ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Airborne Laser

scholarly journals MULTISPECTRAL AIRBORNE LASER SCANNING FOR AUTOMATED MAP UPDATING

2016 ◽  
Vol XLI-B3 ◽  
pp. 323-330 ◽  
Author(s):  
Leena Matikainen ◽  
Juha Hyyppä ◽  
Paula Litkey
Keyword(s):  
Change Detection ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Sensor Technology ◽  
Classification Error ◽  
Surface Model ◽  
Airborne Laser ◽  
Map Updating

During the last 20 years, airborne laser scanning (ALS), often combined with multispectral information from aerial images, has shown its high feasibility for automated mapping processes. Recently, the first multispectral airborne laser scanners have been launched, and multispectral information is for the first time directly available for 3D ALS point clouds. This article discusses the potential of this new single-sensor technology in map updating, especially in automated object detection and change detection. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from a random forests analysis suggest that the multispectral intensity information is useful for land cover classification, also when considering ground surface objects and classes, such as roads. An out-of-bag estimate for classification error was about 3% for separating classes asphalt, gravel, rocky areas and low vegetation from each other. For buildings and trees, it was under 1%. According to feature importance analyses, multispectral features based on several channels were more useful that those based on one channel. Automatic change detection utilizing the new multispectral ALS data, an old digital surface model (DSM) and old building vectors was also demonstrated. Overall, our first analyses suggest that the new data are very promising for further increasing the automation level in mapping. The multispectral ALS technology is independent of external illumination conditions, and intensity images produced from the data do not include shadows. These are significant advantages when the development of automated classification and change detection procedures is considered.

scholarly journals ANALYSIS OF 3D BUILDING MODELS ACCURACY BASED ON THE AIRBORNE LASER SCANNING POINT CLOUDS

2018 ◽  
Vol XLII-2 ◽  
pp. 797-804 ◽  
Author(s):  
W. Ostrowski ◽  
M. Pilarska ◽  
J. Charyton ◽  
K. Bakuła
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
3D Models ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Statistical Parameters ◽  
Airborne Laser ◽  
Building Models

Creating 3D building models in large scale is becoming more popular and finds many applications. Nowadays, a wide term “3D building models” can be applied to several types of products: well-known CityGML solid models (available on few Levels of Detail), which are mainly generated from Airborne Laser Scanning (ALS) data, as well as 3D mesh models that can be created from both nadir and oblique aerial images. City authorities and national mapping agencies are interested in obtaining the 3D building models. Apart from the completeness of the models, the accuracy aspect is also important. Final accuracy of a building model depends on various factors (accuracy of the source data, complexity of the roof shapes, etc.). In this paper the methodology of inspection of dataset containing 3D models is presented. The proposed approach check all building in dataset with comparison to ALS point clouds testing both: accuracy and level of details. Using analysis of statistical parameters for normal heights for reference point cloud and tested planes and segmentation of point cloud provides the tool that can indicate which building and which roof plane in do not fulfill requirement of model accuracy and detail correctness. Proposed method was tested on two datasets: solid and mesh model.

Sign in / Sign up

Export Citation Format

Share Document