scholarly journals Algebraic analysis of kinematics of multibody systems

2013 ◽  
Vol 4 (1) ◽  
pp. 33-47 ◽  
Author(s):  
S. Piipponen ◽  
J. Tuomela
Keyword(s):  
Large Class ◽  
Configuration Space ◽  
Commutative Algebra ◽  
Multibody Systems ◽  
Original System ◽  
Divide And Conquer ◽  
Polynomial Equations ◽  
3 Dimensional ◽  
Kinematical Analysis ◽  
Relevant Component

Abstract. The constructive commutative algebra is very useful in the kinematical analysis of the mechanisms because a large class of systems can be described using polynomial equations. We show that one can analyze quite complicated systems using a sort of divide and conquer strategy to decompose the system, and hence the configuration space, into simpler parts. The key observation is that it seems that typically systems indeed have a lot of distinct components, but usually only one of them is physically relevant. Hence if one finds the equations describing the component of interest the analysis of this system can be surprisingly simple compared to the original system. In particular typically the possible singularities of the original system disappear when one restricts the attention to the relevant component. On the technical side we show that some basic constraints used to define joints in 3 dimensional mechanisms can be decomposed to simpler parts. This has significant practical consequences because using these fundamental decompositions when writing the equations for complicated mechanisms decreases dramatically the complexity of the required computations.

Multibody Dynamics in Generalized Divide and Conquer Algorithm (GDCA) Scheme

2011 ◽  
Author(s):  
Mohammad Poursina ◽  
Kurt S. Anderson
Keyword(s):  
Multibody Systems ◽  
Inverse Dynamics ◽  
Original System ◽  
Parent Body ◽  
Divide And Conquer ◽  
Loop Control ◽  
Generalized Coordinates ◽  
Divide And Conquer Algorithm ◽  
Generalized Force ◽  
New Formulation

Generalized divide and conquer algorithm (GDCA) is presented in this paper. In this new formulation, generalized forces appear explicitly in handle equations in addition to the spatial forces, absolute and generalized coordinates which have already been used in the original version of DCA. To accommodate these generalized forces in handle equations, a transformation is presented in this paper which provides an equivalent spatial force as an explicit function of a given generalized force. Each generalized force is then replaced by its equivalent spatial force applied from the appropriate parent body to its child body at the connecting joint without violating the dynamics of the original system. GDCA can be widely used in multibody problems in which a part of the forcing information is provided in generalized format. Herein, the application of the GDCA in controlling multibody systems in which the known generalized forces are fedback to the system is explained. It is also demonstrated that in inverse dynamics and closed-loop control problems in which the imposed constraints are often expressed in terms of generalized coordinates, a set of unknown generalized forces must be considered in the dynamics of system. As such, using both spatial and generalized forces, GDCA can be widely used to model these complicated multibody systems if it is desired to benefit from the computational advantages of the DCA.

scholarly journals Stringy canonical forms and binary geometries from associahedra, cyclohedra and generalized permutohedra

2020 ◽  
Vol 2020 (10) ◽  
Author(s):  
Song He ◽  
Zhenjie Li ◽  
Prashanth Raman ◽  
Chi Zhang
Keyword(s):  
Large Class ◽  
Configuration Space ◽  
Moduli Space ◽  
Cluster Algebras ◽  
Configuration Spaces ◽  
Minkowski Sum ◽  
Canonical Forms ◽  
Infinite Class ◽  
Special Cases ◽  
Generalized Associahedra

Abstract Stringy canonical forms are a class of integrals that provide α′-deformations of the canonical form of any polytopes. For generalized associahedra of finite-type cluster algebras, there exist completely rigid stringy integrals, whose configuration spaces are the so-called binary geometries, and for classical types are associated with (generalized) scattering of particles and strings. In this paper, we propose a large class of rigid stringy canonical forms for another class of polytopes, generalized permutohedra, which also include associahedra and cyclohedra as special cases (type An and Bn generalized associahedra). Remarkably, we find that the configuration spaces of such integrals are also binary geometries, which were suspected to exist for generalized associahedra only. For any generalized permutohedron that can be written as Minkowski sum of coordinate simplices, we show that its rigid stringy integral factorizes into products of lower integrals for massless poles at finite α′, and the configuration space is binary although the u equations take a more general form than those “perfect” ones for cluster cases. Moreover, we provide an infinite class of examples obtained by degenerations of type An and Bn integrals, which have perfect u equations as well. Our results provide yet another family of generalizations of the usual string integral and moduli space, whose physical interpretations remain to be explored.

Parallel Efficiency of Lagrange Multipliers Based Divide and Conquer Algorithm for Dynamics of Multibody Systems

2011 ◽  
Author(s):  
Paweł Malczyk ◽  
Janusz Fra¸czek
Keyword(s):  
Parallel Computing ◽  
Lagrange Multipliers ◽  
Multibody Systems ◽  
Open Loop ◽  
Divide And Conquer ◽  
Dynamics Simulation ◽  
Parallel Computer ◽  
Optimal Order ◽  
Parallel Efficiency ◽  
Divide And Conquer Algorithm

Efficient dynamics simulations of complex multibody systems are essential in many areas of computer aided engineering and design. As parallel computing resources has become more available, researchers began to reformulate existing algorithms or to create new parallel formulations. Recent works on dynamics simulation of multibody systems include sequential recursive algorithms as well as low order, exact or iterative parallel algorithms. The first part of the paper presents an optimal order parallel algorithm for dynamics simulation of open loop chain multibody systems. The proposed method adopts a Featherstone’s divide and conquer scheme by using Lagrange multipliers approach for constraint imposition and dependent set of coordinates for the system state description. In the second part of the paper we investigate parallel efficiency measures of the proposed formulation. The performance comparisons are made on the basis of theoretical floating-point operations count. The main part of the paper is concetrated on experimental investigation performed on parallel computer using OpenMP threads. Numerical experiments confirm good overall efficiency of the formulation in case of modest parallel computing resources available and demonstrate certain computational advantages over sequential versions.

Orthogonal Complement-Based Divide and Conquer Algorithm: A Detailed Investigation of Its Performance

2013 ◽  
Author(s):  
Imad M. Khan ◽  
Kurt S. Anderson
Keyword(s):  
Growth Rate ◽  
Arbitrary Number ◽  
Multibody Systems ◽  
Divide And Conquer ◽  
Orthogonal Complement ◽  
Error Growth ◽  
Stabilization Method ◽  
Constraint Violation ◽  
Divide And Conquer Algorithm ◽  
Kinematic Loops

In this paper, we characterize the orthogonal complement-based divide-and-conquer (ODCA) [1] algorithm in terms of the constraint violation error growth rate and singularity handling capabilities. In addition, we present a new constraint stabilization method for the ODCA architecture. The proposed stabilization method is applicable to general multibody systems with arbitrary number of closed kinematic loops. We compare the performance of the ODCA with augmented [2] and reduction [3] methods. The results indicate that the performance of the ODCA falls between these two traditional techniques. Furthermore, using a numerical example, we demonstrate the effectiveness of the new stabilization scheme.

scholarly journals A THEORY OF ALGEBRAIC INTEGRATION

2000 ◽  
Vol 14 (22n23) ◽  
pp. 2293-2297
Author(s):  
R. CASALBUONI
Keyword(s):  
Large Class ◽  
Configuration Space ◽  
Path Integral ◽  
Physical Principle ◽  
Integral Approach ◽  
Path Integral Approach ◽  
The One ◽  
Definition Of

In this paper we study the problem of quantizing theories defined over a nonclassical configuration space. If one follows the path-integral approach, the first problem one is faced with is the one of definition of the integral over such spaces. We consider this problem and we show how to define an integration which respects the physical principle of composition of the probability amplitudes for a very large class of algebras.

scholarly journals Improvements to exact Boltzmann sampling using probabilistic divide-and-conquer and the recursive method

2017 ◽  
Vol 26 (1) ◽  
pp. 22-45
Author(s):  
Stephen DeSalvo
Keyword(s):  
Large Class ◽  
Divide And Conquer ◽  
Recursive Method ◽  
Exact Sampling

Abstract We demonstrate an approach for exact sampling of certain discrete combinatorial distributions, which is a hybrid of exact Boltzmann sampling and the recursive method, using probabilistic divide-and-conquer (PDC). The approach specializes to exact Boltzmann sampling in the trivial setting, and specializes to PDC deterministic second half in the first non-trivial application. A large class of examples is given for which this method broadly applies, and several examples are worked out explicitly.

Sign in / Sign up

Export Citation Format

Share Document