scholarly journals The Effects of Coffee and Energy Drink on Color Stability of Hybrid Ceramics

2021 ◽  
Author(s):  
Işıl Sarıkaya ◽  
Hande Dilli
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Color Difference ◽  
Ceramic Materials ◽  
Energy Drink ◽  
Control Group ◽  
Distilled Water ◽  
Color Measurements ◽  
Difference Formula ◽  
Significant Difference

Purpose: The aim of this study was to compare the color stability of two different hybrid ceramic materials. Materials & Methods: Using the precision cutting device (Micracut, Metcon, Turkey), 36 specimens (12 x 15 x 1 mm) were obtained from Vita Enamic (Vita Zahnfabrik, Germany) and Lava Ultimate (3M ESPE, St.Paul, USA) CAD / CAM blocks. After finishing procedures were completed, all specimens were stored in distilled water for 24 h. Then, the specimens were dried and the initial color measurements were made. L, a, b values were determined using a spectrophotometer (Vita Easy Shade, Vita Zahnfabrik, Germany). The specimens were then divided into 3 test groups and stored in coffee (Nescafe Classic, Turkey) (G2, G5), energy drink (Red Bull, Austria) (G3, G6), and in the distilled water as the control group (G1, G4), for 48 h. After 48 h, the specimens were washed with distilled water and dried. Second color measurements were made. ∆E00 values were calculated using the CIEDE 2000 color-difference formula. Results: Data were analyzed by two-way ANOVA. Multiple comparisons were made with Bonferroni’s test. There was a statistically significant difference between 2 ceramics (p=0.035). Generally, Lava Ultimate showed more color change than Vita Enamic. Among the beverages, coffee was significantly different for both ceramics than control and energy drink (p<0.05). Conclusion: Lava Ultimate, showed more color change than Vita Enamic. Coffee has also been determined as the most colorant drink for both hybrid ceramics.

scholarly journals Color Stability of Tetric® N-Ceram Bulk Fill Restorative Composite Resin after Immersion in Different Drinks

2017 ◽  
Vol 8 (1-2) ◽  
pp. 34-41
Author(s):  
Abdullah Saad Al-Abdullah ◽  
Roula S. Al-Bounni ◽  
Mohammad Al-Omari
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Color Stability ◽  
Energy Drink ◽  
Deionized Water ◽  
Control Group ◽  
Protein Supplement ◽  
Restorative Material ◽  
Significant Difference ◽  
Red Bull

Objective: To evaluate the color stability of Tetric® N-Ceram Bulk Fill composite restorative material after immersion in three different (energy drink, protein supplement solution, and combination of energy drink and protein supplement solution) drinks. Materials and Methods: Composite resin disks, 2 mm in depth and 5 mm in diameter, were prepared from the Tetric® N-Ceram Bulk Fill composite restorative material. Specimens were tested after immersion and aging in energy drink (Red Bull) alone, protein supplement solution alone, and in combination with energy drink and protein supplement. Deionized water was used as a control group. Specimens were stored at room temperature of ±23°C for a period of one week in each drink. Color was assessed in the CIELAB using Color Eye 7000A Spectrophotometer. Color differences in different group specimens were measured. Mean values were statistically analyzed using one-way analysis of variance (ANOVA). Further Tukey’s multiple comparison tests were applied to know the differences between the group of specimens. A p value of p < 0.05 was set as significance level. Results: N-Ceram Bulk Fill composite showed Δ L, Δ a, Δ b, and Δ E mean and standard deviation values when immersed in deionized water (–2.6 ± 3.24, 0.16 ± 0.19, 0.32 ± 1.26, and 3.51 ± 2.47), energy drink (–4.19 ± 4.24, 0.21 ± 0.21, 1.57 ± 1.32, and 5.40 ± 3.11), protein supplement (62.71 ± 12.48, –2.63 ± 0.7, 7.7 ± 5.67, and 63.45 ± 12.56), combined energy drink and protein supplement (68.52 ± 13.43, –4.06 ± 1.73, 10.94 ± 5.31, and 69.71 ± 13.42), respectively. All the color coordinates (Δ L, Δ a, and Δ b) showed statistically significant difference, p < 0.001. The color change of N-Ceram Bulk Fill composite specimens Δ E occurred by immersion in energy drink, protein supplement solution, and combined solution of energy drink and protein supplement after seven days was found to be statistically significant p < 0.001. Conclusion: The study’s finding suggests that the energy drink (Red Bull), protein supplement (ISOPURE), and combined immersion in energy drink and protein supplements caused perceptible and clinically unacceptable color change in the Tetric® N-Ceram Bulk Fill composite material. This color change was remarkably high with a combined immersion in energy drink and protein supplement solution.

scholarly journals Effects of Mouth Rinses on Color Stability of Resin Composites

2008 ◽  
Vol 02 (04) ◽  
pp. 247-253 ◽  
Author(s):  
Cigdem Celik ◽  
Bulem Yuzugullu ◽  
Selim Erkut ◽  
Kıvanc Yamanel
Keyword(s):  
Color Change ◽  
Calculated Data ◽  
Color Stability ◽  
Color Difference ◽  
Distilled Water ◽  
Significance Level ◽  
Color Changes ◽  
Mouth Rinses ◽  
Significant Difference ◽  
Restorative Materials

ABSTRACTObjectives: The aim of this study was to evaluate the effects of 3 commercially available mouth rinses on the color stability of 4 different resin-based composite restorative materials.Methods: Forty disc-shaped specimens (10x2 mm) were prepared from each of the following materials: A nanofill composite Filtek Supreme XT (3M/Espe, St. Paul, MN, USA); a packable lowshrinkage composite, AeliteLS Packable (BISCO, Inc, Shaumburg, IL, USA); nanoceramic compositeresin Ceram-X (Dentsply, Konstanz, Germany); a microhybrid composite, and Aelite All-Purpose Body (BISCO). The specimens were then incubated in distilled water at 37°C for 24 hours. The baseline color values (L*, a*, b*) of each specimen were measured with a colorimeter according to the CIELAB color scale. After baseline color measurements, 10 randomly selected specimens from each group were immersed in 1 of the 3 mouth rinses and distilled water as control. The specimens were stored in 20 mL of each mouth rinse (Oral B Alcohol-free, Listerine Tooth Defense Anti-cavity Fluoride Rinse and Klorhex) for 12 hours. After immersion, the color values of all specimens were remeasured, and the color change value ΔE*ab was calculated. Data were analyzed using a 2-way analysis of variance at a significance level of .05.Results: All specimens displayed color changes after immersion, and there was a statistically significant difference among restorative materials and mouth rinses (P<.05); however, the change was not visually perceptible (ΔE*ab<3.3). The interaction between the effect of mouth rinses and type of restorative materials was not statistically significant (P>.05).Conclusions: It may be concluded that although visually nonperceptible, all resin restorative materials tested showed a color difference after immersion in different mouth rinses. (Eur J Dent 2008;2:247-253)

Effect of Thermocycling on Color Stability of Acrylic Resin Materials Immersed in Denture Cleansers

2018 ◽  
Vol 9 (02) ◽  
Author(s):  
Ala'a Ibrahim Abou-Obaid
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Acrylic Resin ◽  
Color Difference ◽  
Control Group ◽  
Water Control ◽  
Color Measurements ◽  
Heat Cure ◽  
The Mean ◽  
Denture Cleansers

Objective: To evaluate the effect of thermocycling on the color stability of heat and self-cure resins after immersion in denture cleansers. Material and methods: Forty-eight disks of heat and self-cure resins were fabricated. The specimens of each material were divided into 4 subgroups (n = 12) and immersed in different denture cleansers (Distilled water {control}, Corega, StainAway Plus and Polident) daily for 1 week and first color measurements (T1) were recorded (before thermocycing). The specimens were then subjected to 5000 cycles of thermocycling and the second color measurements (T2) were recorded (after thermocycling). Results: A significant increase of color change was noticed in self-cure compared to heat-cure resins after thermocycling (p=0.001). The color change in heat-cure resins immersed in different solutions was insignificant (p>0.05). Whereas, there was significant color changes in self-cure resins among denture cleansers (p<0.05). The mean difference of color change was greater in self-cure resins immersed in Corega (3.93 ± 2.71) and Polident (3.55 ± 2.06) compared to the control group (0.15 ± 1.66) and lower in specimens immersed in Stain Away Plus (1.36 ± 1.60) compared to Corega. There was a significant decrease in the mean of color change after thermocycling in heat-cure resins immersed in distelled water and Stain Away Plus (p<0.05) and in self-cure resins immersed in Corega, Stain Away Plus and Polident compared to color change before thermocycling (p<0.05). Conclusion: Aging process resulted in a significant color change in self-cure compared to heat-cure resins and the value of color difference was varied according to the denture cleanser used.

scholarly journals Evaluation of color change in acrylic and bisacrylic resin resins in different solutions

2018 ◽  
Vol 5 (4) ◽  
pp. 76
Author(s):  
Mone Laiz Bortoli ◽  
Cristina Von Appen ◽  
Camila Longoni ◽  
Carmen Beatriz Borges Fortes ◽  
Jefferson Tomio Sanada
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Acrylic Resin ◽  
Color Variation ◽  
Color Reading ◽  
Control Group ◽  
Color Changes ◽  
Significant Difference ◽  
Prosthesis Material ◽  
Chlorhexidine Solution

Aim: This work aimed to evaluate the color stability of an acrylic resin chemically activated (ARCA) using different handling techniques, and a bisacrylic resin when exposed to different pigmentation solutions.Material and Methods: Silicon matrixes were confectioned (10x10x3mm) to be used as specimens. The groups were designed as follows: Group Pot, Group Brush, Group Manufacturer and Group Bisacrylic (n=18). Each group was exposed to three different pigmentation solutions: distilled water, coke and chlorhexidine digluconate 0.12%. Three readings were performed for each specimen using a spectrophotometer, and the evaluations were carried out in three different time. After the color reading, three averages and the standard deviation of variation were performed after 24 hours (T1), 7 days (T2) and 14 days (T3). Data were submitted to the ANOVA and 2 criteria and Tukey (P<0.05) in the statistical software SSPS 18 for Macintosh (SPSS Inc., Chicago, USA).Results: When compared the solutions in each group of material, there was no statistically significant difference, except for T3, where the group Dencor Brush and Bisacrylic demonstrated higher color variation in all the solutions, even in the control group, and the values in Chlorhexidine higher than the other, showing greater instability after 14 days.Conclusions: With the results, bisacrylic resin used as provisory prosthesis material presents greater color instability than the ARCA, when submitted to different solutions. Bisacrylic resin and Dencor Brush present significantly visible color changes in chlorhexidine solution after 14 days. All the materials in coke solution present homogeneity in the color change after 7 days exposition to the solution, with no visible color change.

scholarly journals Effect of Silver Nanoparticles on Some Physical& Biological Properties of Fluid Denture Base Material

2020 ◽  
Vol 04 (1) ◽  
pp. 27-40
Author(s):  
Jaymin Taher ◽  
Salem Salem
Keyword(s):  
Silver Nanoparticles ◽  
Impact Strength ◽  
Color Change ◽  
Base Material ◽  
Color Stability ◽  
Biological Properties ◽  
Strength Test ◽  
Control Group ◽  
Transverse Strength ◽  
Significant Difference

Poly methyl methacrylate (PMMA) is one of the most widely used materials in modern prosthodontics. It is widely known due to its simplicity in use and acceptable aesthetic. A new concept of polymerization fluid resin technique was instead of heat and gypsum material. Forty specimens were prepared from two brands of fluid acrylic resin. The samples were divided into two groups, the first one was the control while the other group was incorporated with silver nanoparticles(modified). The tests performed were impact strength, transverse strength, color stability and candida retention ability on the samples. 10 samples for each test were used. The results showed that modified group had significantly higher impact strength than the control group. There was non-significant difference between group of modified fluid acrylic and control group. Regarding color stability, there were highly significant color change after 10 days of immersion in the tea solution for the modified group the results of the biological test showed that the candida retention of the control group was significantly higher than modified group. Within the limitation of this study it can be concluded that addition of silver nanoparticles has resulted in significant difference between control and modified group for impact strength test. While non-significant difference was seen for transverse strength test. In regard to color stability, showed enhancement in color stability for both before and after placement in tea solution. Addition of silver nanoparticles also caused reduction in candida albicans retention in the added samples.

scholarly journals Evaluation the Effect of Different Antioxidants Applied After Bleaching on Teeth Color Stability

2020 ◽  
Vol 23 (4) ◽  
pp. 9p
Author(s):  
Alperen Degirmenci ◽  
Emine Kara ◽  
Beyza Unalan Degirmenci ◽  
Mutlu Ozcan
Keyword(s):  
Green Tea ◽  
Color Change ◽  
Color Stability ◽  
Sodium Ascorbate ◽  
Control Group ◽  
White Tea ◽  
Significant Difference ◽  
Treatment Stage ◽  
The One ◽  
One Way Anova

Objective: Vital bleaching is popular treatment option for discolored teeth. But at post-treatment stage, loss of adhesion is highly reported. Literature focused on antioxidant application for the answer of this issue. The aim of this study is comparing effects of six different antioxidants on color stability of bleached teeth. Material and Methods: This study includes total of 84 extracted intact non-carious lower incisors. 35% hydrogen peroxide was applied on the labial surfaces of specimens in accordance with manufacturer's instructions. The bleached teeth were divided into 7 groups. No antioxidants were applied to the control group. For the experimental groups, the following antioxidants were applied for 10 minutes each: 5% proanthocyanidin, 5% sodium ascorbate, 5% lycopene, %5 green tea, %5 white tea and %5 ?-tocopherol. CIE L*, a* and b* values of the teeth were measured by a spectrophotometer. The data were analyzed using IBM SPSS version 23. Results: The differences between the groups were determined with one-way ANOVA. The one-way ANOVA test revealed a statistically significant difference between the groups (p<0.005). Highest color change was observed in lycopene group and the lowest was belongs to green tea group. Conclusions: Proanthocyanidin, white tea and green tea could be good post-bleaching antioxidant alternatives based on their herbal nature.

scholarly journals The Effects of Mouthwashes on the Color Stability of Resin-Based Restorative Materials

2020 ◽  
pp. 346-357
Author(s):  
Ayşe Tuğba Ertürk-Avunduk ◽  
Seçkin Aksu ◽  
Ebru Delikan
Keyword(s):  
Analysis Of Variance ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Multiple Comparison ◽  
Color Measurement ◽  
Distilled Water ◽  
Significant Difference ◽  
Restorative Materials ◽  
Post Hoc

Objective: This study investigated the effects of three types of mouthwash on the color stability of three resin-based restorative materials (nanohybrid resin composite, sonic-activated bulk-fill material, and compomer). Materials and Methods: To this end, 120 cylindrical disc specimens were prepared and polished, after which they were incubated in distilled water for 24 hours for post-polymerization. The baseline color values of each specimen were measured with a spectrophotometer, then the specimens were randomly divided into four groups. Following immersion in the mouthwashes for 24 hours, the specimens were rinsed with distilled water and dried before the color measurement was repeated. The values of color change (∆E₀₀) were subsequently calculated. A two-way analysis of variance and Duncan’s post hoc multiple comparison tests were conducted to determine statistically significant differences among the restorative materials. Results: All samples showed discoloration after immersion, albeit some instances of discoloration were imperceptible. In this respect, a statistically significant difference was found among the restorative materials and mouthwashes (p<0.05). Imperceptible ∆E₀₀ values were derived on the nanohybrid resin composite and compomer, but perceptible and acceptable ∆E₀₀ values were detected on the sonic-activated bulk-fill materials (p<0.05). The clinically unacceptable discoloration was observed on the sonic-activated bulk-fill composite immersed in Listerine®. Conclusions: Clinicians should make recommendations based on the potential staining capacity of mouthwashes prescribed for daily use in restorative materials. In this way, the need for renewal of restorations due to discoloration could be avoided.

scholarly journals Color Stability of CAD/CAM Interim Material for Long-Term Fixed Dental Prostheses vs. Conventional Materials after Immersion in Different Staining Solutions

2021 ◽  
Vol 5 (4) ◽  
pp. 106
Author(s):  
Lissethe Peñate ◽  
Montse Mercade ◽  
María Arregui ◽  
Miguel Roig ◽  
Juan Basilio ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Color Change ◽  
Pearson Correlation ◽  
Contrast Ratio ◽  
Color Stability ◽  
Initial Time ◽  
Control Group ◽  
Computer Assisted ◽  
Significant Difference ◽  
Cad Cam

The color stability of interim computer-aided design and computer-assisted manufacturing (CAD/CAM) materials has not been exhaustively investigated. The aim of this study was to compare the translucency (TP) and contrast ratio (CR) of CAD/CAM blocks and conventional interim materials, as well as the effects of varnish application and tooth-brushing on color stability after immersion in different staining solutions. Four hundred and eighty specimens were fabricated with four different interim materials (n = 120) and were divided into three experimental, and one control group (n = 30). The color measurements were taken at the initial time (T0), 24 h (T1), 7 days (T2), and 30 days (T3) after immersion in different solutions. CIEDE2000 (ΔE00) values were analyzed with ANOVA and Fischer’s LSD test with a 95% confidence interval. The relationship between TP and CR was analyzed with a Pearson correlation. All interim materials showed a significant difference (p < 0.05) in color change after 30 days. Results showed that polyethyl methacrylate resins (PEMA) had the highest stability over time. The TP and CR were statistically significant (p < 0.05). It was observed that brushing improved the color stability but the ΔE00 were the highest when the varnish alone or varnish and brushing were used, except in the bis-acryl group, in which varnish and brushing decreased the color stainability.

scholarly journals Comparative evaluation of the color stability of universal composites

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 234-237
Author(s):  
Merve Gürses ◽  
Nevin Çobanoğlu ◽  
Omar Faez Abdulateef
Keyword(s):  
Comparative Evaluation ◽  
Color Change ◽  
Native Speakers ◽  
Color Stability ◽  
Composite Resins ◽  
Control Group ◽  
Distilled Water ◽  
Color Changes ◽  
Before And After ◽  
Native Speakers Of English

Aim: The aim of this study is to compare the color stability of different universal composites and to evaluate the effects of keeping them in water for 1 week before coloring. Methodology: Filtek Ultimate (FU), Estelite Ʃ Quick (EQ), and Ceram X One (CX) composites were used. The specimens were kept in the dark, dry environment for 24 hours, then polished, and each composite group was divided into 3 groups: the control, the group that was kept in water for 1 week before coloring and coloring (n=7). The samples in the control group were kept in distilled water for 3 weeks. Samples in the coloring group were colored with coffee for 2 weeks (C), and the samples in the last group were kept in water for 1 week and then stained with coffee for 2 weeks (W+C) (n=7). Color measurements for all samples were taken twice, once before and once after the coloring period. The color changes of the samples were measured using the ∆E* parameter, which was calculated with before and after measurements.  Results: For all composite resins, the ΔE values of the samples in the W+C and C groups were significantly higher than those in the control group. When the composites were compared with each other, the differences between the ΔE values of the composites in the control, W+C, and C groups were not statistically significant. For FU and ESQ, at the end of the coloration period, there were no statistically significant differences between the W+C and C groups. However, for CX, the color change of the samples in the W+C group was significantly higher than that in  the C group. Conclusion: Storage in distilled water for 1 week before staining did not reduce the color change values of the samples. Thus, after composite restorations are performed, there is no need to advise patients to avoid staining foods, especially in the first week after restoration.   How to cite this article: Abdulateef OF, Çobanoğlu N, Gürses M. Comparative evaluation of the color stability of universal composites. Int Dent Res 2021;11(Suppl.1):234-7. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.34   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Effect of brushing on colour stability of nanohybrid composite after immersion in brewed beverages – an in vitro study

2021 ◽  
Author(s):  
Jayeeta Verma ◽  
Leena Padhye ◽  
Sidharth Verma
Keyword(s):  
Color Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Distilled Water ◽  
Staining Solution ◽  
Significant Difference ◽  
Nanohybrid Composite ◽  
Powered Toothbrush ◽  
Disk Sample

Background and aims. In today’s world, everyone is mindful of one’s appearance and appreciates aesthetics. Of the various restorative materials available, composites are considered as the most aesthetic with good color stability. This study aims at finding the effect of brushing  on the color stability of nanohybrid composite after being immersed in various beverages. Methods. Thirty disk specimens were prepared for each staining solution (N=30), with a total of 90 specimens. The disk specimens for each staining solution were then sub divided into 2 groups (N=15): brushing and non-brushing. After preparation, the specimens were soaked in distilled water for 24 hours in separate containers. Baseline color of the samples was evaluated using spectrophotometer. The samples were then immersed in tea, coffee or water. The groups of samples to be brushed were held in the mold and 20 strokes of brushing using an electronically powered toothbrush were done on each side of the disk sample. The color was re-evaluated after a period of 14 days. Results. When comparing among the three beverages, tea showed the highest ΔE*ab indicating greatest discoloration when compared to coffee and water. This can be graded as tea > coffee > water. However, statistically there was no significant difference between tea and coffee. When compared within tea, coffee, or water specimens the non - brushed specimens showed greater discoloration compared to the brushed specimens both clinically and statistically. Conclusion. When immersing the specimens in the solutions, tea showed more color change compared to coffee, making the specimens clinically unacceptable. However, brushing the specimens reduced the discoloration when compared to non–brushing, making the coffee specimens clinically acceptable.

Sign in / Sign up

Export Citation Format

Share Document