scholarly journals The Effects of Mouthwashes on the Color Stability of Resin-Based Restorative Materials

2020 ◽  
pp. 346-357
Author(s):  
Ayşe Tuğba Ertürk-Avunduk ◽  
Seçkin Aksu ◽  
Ebru Delikan
Keyword(s):  
Analysis Of Variance ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Multiple Comparison ◽  
Color Measurement ◽  
Distilled Water ◽  
Significant Difference ◽  
Restorative Materials ◽  
Post Hoc

Objective: This study investigated the effects of three types of mouthwash on the color stability of three resin-based restorative materials (nanohybrid resin composite, sonic-activated bulk-fill material, and compomer). Materials and Methods: To this end, 120 cylindrical disc specimens were prepared and polished, after which they were incubated in distilled water for 24 hours for post-polymerization. The baseline color values of each specimen were measured with a spectrophotometer, then the specimens were randomly divided into four groups. Following immersion in the mouthwashes for 24 hours, the specimens were rinsed with distilled water and dried before the color measurement was repeated. The values of color change (∆E₀₀) were subsequently calculated. A two-way analysis of variance and Duncan’s post hoc multiple comparison tests were conducted to determine statistically significant differences among the restorative materials. Results: All samples showed discoloration after immersion, albeit some instances of discoloration were imperceptible. In this respect, a statistically significant difference was found among the restorative materials and mouthwashes (p<0.05). Imperceptible ∆E₀₀ values were derived on the nanohybrid resin composite and compomer, but perceptible and acceptable ∆E₀₀ values were detected on the sonic-activated bulk-fill materials (p<0.05). The clinically unacceptable discoloration was observed on the sonic-activated bulk-fill composite immersed in Listerine®. Conclusions: Clinicians should make recommendations based on the potential staining capacity of mouthwashes prescribed for daily use in restorative materials. In this way, the need for renewal of restorations due to discoloration could be avoided.

scholarly journals The effect of optical brightening toothpaste on the color stability of esthetic restorative materials

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 81-85
Author(s):  
Firdevs Kahvecioğlu ◽  
Elçim Çoban ◽  
Hayriye Esra Ülker
Keyword(s):  
Color Change ◽  
Calculated Data ◽  
Color Stability ◽  
Color Changes ◽  
Significant Difference ◽  
Restorative Materials ◽  
Cherry Juice ◽  
Native Speakers Of English ◽  
Materials Used ◽  
Post Hoc

Aim: The aim of this study is to evaluate the effects of whitening toothpaste applications on the color stability of different tooth-colored restorative materials (Fuji IX, GC Fuji II LC, Equia Forte, and Kerr Point 4)  Methodology: Standardized fourty disc-shaped specimens were prepared from esthetic restorative materials and polished. The baseline color values of each specimen were then measured using a spectrophotometer, according to the Commission Internationale de l'Eclairage L*, a*, and b* (CIELAB) color scale. Ten specimens from each group were then immersed in two different beverages (cherry juice and coke) for seven days. After immersion, the color value of each specimen was re-measured. Each sample was brushed with whitening toothpaste for 30 seconds using an electric toothbrush. The samples were kept in distilled water at room temperature and brushing continued twice a day for seven days. The color change value, Delta E (ΔE), was calculated. Data were analyzed by two-way ANOVA and post hoc Tukey's test. Results: When the results were evaluated, after the colored samples had been brushed with whitening toothpaste, a difference was found between the Delta E values according to the materials used (p<0.001), but no difference was found in relation to the beverages (p>0.001). When the values of the color changes were evaluated after the first brushing with whitening toothpaste and before the specimens were colored with drinks, a difference was observed in the Fuji II cola, Fuji II cherry, and Equia Forte cola groups (p<0.05). When the values of the color changes were evaluated for specimens in which brushing had been done twice a day for seven days with whitening toothpaste and before they were colored with drinks, a significant difference was observed in the Fuji II cherry and Equia Forte cola groups (p<0.05). Conclusion: Using Signal White Now whitening toothpaste for 2 min 2 times a day for seven days caused significant changes in the color of the restorative materials. The color change is dependent upon the type of restorative material that is used.   How to cite this article: Kahvecioğlu F, Çoban E, Ülker HE. The effect of optical brightening toothpaste on the color stability of esthetic restorative materials. Int Dent Res 2021;11(Suppl.1):80-4. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.13   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Effects of Mouth Rinses on Color Stability of Resin Composites

2008 ◽  
Vol 02 (04) ◽  
pp. 247-253 ◽  
Author(s):  
Cigdem Celik ◽  
Bulem Yuzugullu ◽  
Selim Erkut ◽  
Kıvanc Yamanel
Keyword(s):  
Color Change ◽  
Calculated Data ◽  
Color Stability ◽  
Color Difference ◽  
Distilled Water ◽  
Significance Level ◽  
Color Changes ◽  
Mouth Rinses ◽  
Significant Difference ◽  
Restorative Materials

ABSTRACTObjectives: The aim of this study was to evaluate the effects of 3 commercially available mouth rinses on the color stability of 4 different resin-based composite restorative materials.Methods: Forty disc-shaped specimens (10x2 mm) were prepared from each of the following materials: A nanofill composite Filtek Supreme XT (3M/Espe, St. Paul, MN, USA); a packable lowshrinkage composite, AeliteLS Packable (BISCO, Inc, Shaumburg, IL, USA); nanoceramic compositeresin Ceram-X (Dentsply, Konstanz, Germany); a microhybrid composite, and Aelite All-Purpose Body (BISCO). The specimens were then incubated in distilled water at 37°C for 24 hours. The baseline color values (L*, a*, b*) of each specimen were measured with a colorimeter according to the CIELAB color scale. After baseline color measurements, 10 randomly selected specimens from each group were immersed in 1 of the 3 mouth rinses and distilled water as control. The specimens were stored in 20 mL of each mouth rinse (Oral B Alcohol-free, Listerine Tooth Defense Anti-cavity Fluoride Rinse and Klorhex) for 12 hours. After immersion, the color values of all specimens were remeasured, and the color change value ΔE*ab was calculated. Data were analyzed using a 2-way analysis of variance at a significance level of .05.Results: All specimens displayed color changes after immersion, and there was a statistically significant difference among restorative materials and mouth rinses (P<.05); however, the change was not visually perceptible (ΔE*ab<3.3). The interaction between the effect of mouth rinses and type of restorative materials was not statistically significant (P>.05).Conclusions: It may be concluded that although visually nonperceptible, all resin restorative materials tested showed a color difference after immersion in different mouth rinses. (Eur J Dent 2008;2:247-253)

scholarly journals Color Stability of Restorative Materials in Response to Arabic Coffee, Turkish Coffee and Nescafe

2013 ◽  
Vol 14 (4) ◽  
pp. 681-690 ◽  
Author(s):  
Khalid H Al-Samadani
Keyword(s):  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Color Difference ◽  
Composite Resins ◽  
Color Measurement ◽  
Water Control ◽  
Mean Values ◽  
Significance Level ◽  
Restorative Materials

ABSTRACT Objective To evaluate the effect of Arabic coffee, Turkish coffee and Nescafe on the color stability of four different composite resins after a period of aging time 1, 7 and 30 days. Materials and methods Twenty specimens from each type of tested composite resin material were prepared. Five specimens from each tested material (Z350 XT, Artist, GC and Z250) was evaluated after storage in Arabic coffee, Turkish coffee, Nescafe and distil water (control) at 37°C in a dark container for 1, 7 and 30 days. Color measurement was done using colorimeter based on the CIE L* a* b* color scale. Color differences ΔE*ab, Δb* and Δa* among specimens immersed in distil water and staining coffee beverages were evaluated overtime. Mean values were statistically analyzed with one-way analysis of variance (ANOVA), followed by Tukey test with p < 0.05 as significance level. Results All tested composite resins showed increase color change after a period of 1, 7 and 30 days. The color change ΔE*ab, Δb* and Δa* exhibited by Arabic coffee, in Turkish coffee and Nescafe except Δa*. The highest total color difference ΔE*ab after 30 days was in group A Arabic coffee (ΔE > 1.5 perceivable) and not perceivable in group B Turkish coffee and group C Nescafe. For Δb* all materials discolored toward yellowness after 30 days except Arabic coffee group which shifted from yellowness toward blueness (Δb*> 1.5 perceivable). Conclusion The effect of staining beverages on the resin composite materials increases with time of aging toward yellowness and not perceivable in all groups except with Arabic coffee which had highest effect after 30 days and the discoloration shifted from yellowness to blueness perceivable. How to cite this article Al-Samadani KH. Color Stability of Restorative Materials in Response to Arabic Coffee, Turkish Coffee and Nescafe. J Contemp Dent Pract 2013;14(4):681-690.

scholarly journals Evaluation of color stability of different temporary restorative materials

2015 ◽  
Vol 44 (5) ◽  
pp. 262-267 ◽  
Author(s):  
José Vitor Quinelli Mazaro ◽  
Luiz Miguel Minani ◽  
Adriana Cristina Zavanelli ◽  
Caroline Cantieri de Mello ◽  
Cleidiel Aparecido Araújo Lemos
Keyword(s):  
Storage Time ◽  
Color Change ◽  
Artificial Saliva ◽  
Color Stability ◽  
Time Interval ◽  
Acrylic Resins ◽  
Significant Difference ◽  
Restorative Materials ◽  
Before And After ◽  
Level Of Significance

AbstractIntroductionTemporary restorative materials are widely used, however, little is know about their color stability.Objectiveto evaluate the color stability of the following temporary restorative materials: acrylic and bis-acrylic resins after immersion in pigmenting solutions for different periods of storage.Material and methodFour materials were tested (Dêncor/Clássico, Protemp 4/3M ESPE; Structur 2 SC/Voco; Luxatemp AM Plus/DMG) and 30 test specimens (15 mm in diameter and 2 mm thick) per material were fabricated. They were divided according to the storage medium (artificial saliva, saliva + cola type soda, and saliva + coffee) and storage time intervals (2, 5, 7 and 15 days). Color measurements were made before and after immersions, with use of a spectrophotometer, by means of the CIE L*a*b* system. The data were analyzed by the analysis of variance and the Tukey Test, at a level of significance of 5%.ResultAcrylic resin presented greater color stability in comparison with bis-acrylic resins (p<0.001). When bis-acrylic resins were compared no significant difference was observed between the resins Structur and Luxatemp (p=0.767). As regards solutions tested, coffee showed the highest color change values (p<0.001), and the longer the storage time interval, the greater was the color change in all the temporary restorative materials analyzed (p<0.001).ConclusionAcrylic resin presented greater color stability in comparison with bis-acrylic resins (p<0.001). Coffee caused the greatest color change, and immersion time was determinant in color stability of the temporary materials analyzed.

scholarly journals Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges

2019 ◽  
Vol 30 (1) ◽  
pp. 52-57 ◽  
Author(s):  
Eduardo Haruki Ozera ◽  
Fernanda Miori Pascon ◽  
Américo Bortolazzo Correr ◽  
Regina Maria Puppin-Rontani ◽  
Aline Rogéria de Castilho ◽  
...  
Keyword(s):  
Color Change ◽  
Artificial Saliva ◽  
Color Stability ◽  
Initial Surface ◽  
Resin Composites ◽  
Cranberry Juice ◽  
Color Changes ◽  
Restorative Materials ◽  
Post Hoc ◽  
Acidic Beverages

Abstract This study evaluated gloss and color changes of esthetic restorative materials subjected to different acidic beverages. Specimens of resin composites (Z350XT (Z350), IPS Empress Direct (ED), Charisma Diamond (CD)) were prepared and the initial surface gloss and color (ΔE) were measured (n=10). Then, the specimens were immersed in 4 mL of each of the different beverages (cranberry juice; Coca-Cola; coffee or artificial saliva) during 15 min, 3x/day for 14 days and new gloss and color readings were obtained. Color change was evaluated with the ΔE formula and gloss change values were obtained by the formula: (final gloss - initial gloss). Data was submitted to two-way ANOVA followed by Tukey’s post hoc test (a=0.05). CD showed the lowest color change among resin composites. The highest ΔE values were obtained after immersion in coffee and cranberry juice. Coffee promoted the highest gloss change (worst gloss retention), followed by cranberry juice, Coca-cola and artificial saliva (p<0.05). The type of beverage significantly influenced the gloss of resin composites. Coca-cola reduced gloss of the three resin composites in a similar manner. Coffee affected the ED gloss more than that of Z350 and CD, while cranberry juice affected Z350 more than ED and CD. Saliva had a more pronounced effect on the gloss retention of CD than ED. The beverages used in this study influenced the optical surface properties of the composites studied.

Effect of Liquid Polishing System on Color Stability of Bleached Enamel

2013 ◽  
Vol 804 ◽  
pp. 141-145
Author(s):  
Xiu Lan Chen ◽  
Huang Qin Chen
Keyword(s):  
Red Wine ◽  
Color Change ◽  
Color Stability ◽  
Control Groups ◽  
Significant Difference ◽  
Before And After ◽  
Total Color Change ◽  
Post Hoc ◽  
And Control ◽  
One Way Anova

The purpose of this study was to investigate the effect of liquid polishing system (BisCover) on color stability of the bleached enamel upon exposure to a staining agent-red wine. Forty specimens were prepared. They were divided into 2 groups and different procedures, including only bleaching with Opalescence PF (PF) or Opalescence regular (R) gels, and application of BisCover after blaeching (PF-B, R-B) were used. Unbleached specimens were served as control groups (control-1 and control-2). The specimens were stored for 48 h in red wine. The color of all specimens was measured before and after exposure with a spectrophotometer, and total color change (ΔE*) were calculated. The data were analyzed with a one-way ANOVA and the means were compared by Tukeys post hoc analysis (α=0.05). PF-B and R-B groups demonstrated significantly less color change than PF and R groups. the control-1 and control-2 groups had the least color change. No significant difference were observed between PF and R group. BisCover improved the color stability of bleached enamel in red wine.

scholarly journals Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee/Water Immersion

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Sayna Shamszadeh ◽  
Seyedeh Mahsa Sheikh-Al-Eslamian ◽  
Elham Hasani ◽  
Ahmad Najafi Abrandabadi ◽  
Narges Panahandeh
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Imaging System ◽  
Water Immersion ◽  
Color Space ◽  
Color Stability ◽  
Composite Resins ◽  
Distilled Water ◽  
Color Changes ◽  
Post Hoc

We aimed to evaluate the color stability of bulk-fill and conventional composite resin with respect to thickness and storage media. Twenty specimens of a conventional composite resin (6 mm diameter and 2 mm thick) and 40 specimens of the bulk-fill Tetric EvoCeram composite resin at two different thicknesses (6 mm diameter and 2 mm thick or 4 mm thick,n=20) were prepared. The specimens were stored in distilled water during the study period (28 d). Half of the specimens were remained in distilled water and the other half were immersed in coffee solution 20 min/d and kept in distilled water between the cycles. Color changes (ΔE) were measured using the CIEL⁎a⁎b⁎color space and a digital imaging system at 1, 7, 14, and 28 days of storage. Data were analyzed using Two-way ANOVA and Tukey’s HSD post hoc test (P<0.05). Composite resins showed significant increase in color changes by time (bulk-fill > conventional;P<0.001). Coffee exhibited significantly more staining susceptibility than that of distilled water (P<0.001). There was greater color changes with increasing the increment thickness, which was significant at 14 (P<0.001) and 28 d (P<0.01). Color change of bulk-fill composite resin was greater than that of the conventional one after coffee staining and is also a function of increment thicknesses.

The Effect of Bleaching Agents on the Color Stability of Ceromer and Porcelain Restorative Materials In Vitro

2012 ◽  
Vol 38 (1) ◽  
pp. E1-E8 ◽  
Author(s):  
HB Kara ◽  
F Aykent ◽  
B Ozturk
Keyword(s):  
Color Change ◽  
Glass Ceramics ◽  
In Vitro Study ◽  
Color Stability ◽  
Color Changes ◽  
Bleaching Procedure ◽  
Significant Difference ◽  
Restorative Materials ◽  
The Difference

SUMMARY Purpose The aim of this in vitro study was to determine the color changes of five different restorative materials after exposing these materials to two different home bleaching agents. Methods This study applied bleaching agents to an ultralow-fusing porcelain, a low-fusing porcelain, two types of heat-pressed glass ceramics, and a ceromer. A total of 24 disc-shaped specimens were fabricated (with a diameter of 10 mm and a thickness of 2 mm) from each material (n=12). The initial color measurements were taken with a spectrophotometer. The first set of specimens were bleached with 10% hydrogen peroxide (HP) for one hour daily for 10 days. The other set of specimens were bleached with 10% carbamide peroxide (CP) bleaching gel for eight hours daily for 14 days. Data were analyzed with the one-way analysis of variance and Kruskal-Wallis statistical test. The difference in the prebleaching and postbleaching color of each material was considered to be statistically significant at p &lt; 0.05. Results The study found a statistically significant difference among the color changes of the test groups after exposing them to both bleaching agents (p&lt;0.05). Appreciable color change was observed in the Estenia (ΔE=3.99) specimens that were bleached with the HP, and noticeable color changes were observed in the Estenia (ΔE=1.89) and IPS Empress 2 (ΔE=1.66) groups when they were treated with the CP. Conclusions Restorations (especially polymer-containing restorative materials) should be protected before any bleaching procedure due to the high risk of color change.

scholarly journals Influence of electronic nicotine delivery systems (ENDS) in comparison to conventional cigarette on color stability of dental restorative materials

2020 ◽  
Vol 36 (5) ◽  
Author(s):  
Fahim Vohra ◽  
Abdulelah Andejani ◽  
Osamah Alamri ◽  
Abdulaziz Alshehri ◽  
Rana S Al-Hamdan ◽  
...  
Keyword(s):  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Delivery Systems ◽  
Electronic Nicotine Delivery Systems ◽  
Ceramic Samples ◽  
Dental Restorative Materials ◽  
Nicotine Delivery ◽  
Restorative Materials ◽  
Dental Restorative

Objective: The use of Electronic Nicotine Delivery Systems (ENDS) is increasing rapidly. However, its discoloring effect on dental restorations is not known. This study aimed to evaluate the effect of ENDS aerosol when compared to conventional cigarette smoke (CS) on the color stability of dental ceramic (DC) and resin composite (RC). Methods: This research project was conducted from November 2018 to May 2019. In this study 30 discs each for DC and RC materials were fabricated to be equally divided into groups of exposure to CS, ENDS aerosol and storage in distilled water (No smoke; NS) respectively (n=10). Specimens were exposed for a total of 7 days, with a rate of 10 cycles per day, each cycle represented 10 puffs. The color change was assessed using the CIELAB color space, by calculating ΔE. Data was analysed using ANOVA and multiple comparisons test. Results: Ceramic specimens in CS (2.422 ± 0.771) and ENDS (2.396 ± 0.396) groups showed comparable ΔE (color change) (p=0.992). Similarly, composite specimens in CS (42.871 ± 2.442) and ENDS (46.866 ± 3.64) groups showed comparable ΔE (p>0.05). NS specimens in both composite and ceramic samples showed lower ΔE than CS and ENDS specimens respectively. Conclusions: Aerosol from Electronic nicotine delivery systems (ENDS) showed similar discoloration levels as cigarette smoking (CS). The level of discoloration for ceramic samples for both ENDS and CS was below clinically perceptible levels (Mean ΔE < 2.5). Discoloration of composite resin due to CS and ENDS was visually perceptible (Mean ΔE > 4.0). doi: https://doi.org/10.12669/pjms.36.5.2303 How to cite this:Vohra F, Andejani AF, Alamri O, Alshehri A, Al-Hamdan RS, Almohareb T, et al. Influence of electronic nicotine delivery systems (ENDS) in comparison to conventional cigarette on color stability of dental restorative materials. Pak J Med Sci. 2020;36(5):---------.  doi: https://doi.org/10.12669/pjms.36.5.2303 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Effect of Sodium Tripolyphosphate on Color Stability of In-Office Bleached Teeth

2013 ◽  
Vol 804 ◽  
pp. 57-61
Author(s):  
Huang Qin Chen ◽  
Bin Huang
Keyword(s):  
Red Wine ◽  
Color Change ◽  
Sodium Tripolyphosphate ◽  
Color Stability ◽  
Positive Control ◽  
Negative Control ◽  
Significant Difference ◽  
Before And After ◽  
Total Color Change ◽  
Post Hoc

The purpose of this study was to investigate the effect of polyanionsodium tripolyphosphate (STP) on color stability of the bleached enamel upon exposure to a staining agent-red wine. Thirty specimens were prepared and bleached with 35% hydrogen peroxide (HP). Then, they were divided into three groups and immersed in different experiment solutions, including distilled and deionized water (DDW, negative control), 2% STP (PH 9.0) and 1000 ppm NaF aq. (positive control), before and after red wine stain challenge, 3 times per day. The color of all specimens was measured before and after exposure to red wine with a spectrophotometer, and total color change (ΔE*) were calculated. The data were analyzed with a one-way ANOVA and the means were compared by Tukeys post hoc analysis (α=0.05). STP treatment group demonstrated significantly less color change than DDW and NaF groups (p<0.05). No significant difference was observed between DDW and NaF group. It can be concluded that the staining susceptibility of bleached enamel decreased after application of polyanion sodium tripolyphosphate.

Sign in / Sign up

Export Citation Format

Share Document