scholarly journals Free vibrations of axially functionally graded horseshoe arch

2021 ◽  
Vol 9 (3) ◽  
pp. 251-262
Author(s):  
Gweon Sik Kim ◽  
Sang Jin Oh ◽  
Tae Eun Lee ◽  
Byoung Koo Lee
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Free Vibration ◽  
Natural Frequencies ◽  
Mass Density ◽  
Quadratic Function ◽  
Free Vibrations ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Parametric Studies

This paper deals with free vibrations of the axially functionally graded (AFG) horseshoe arch. The modulus of elasticity and the mass density of AFG material of arch are chosen as a univariate quadratic function. The differential equations with the boundary conditions that govern the free vibration of such arch are derived and numerically solved to calculate natural frequencies and mode shapes. Natural frequencies of this study agree well with those of the finite element ADINA. Parametric studies of the geometrical and mechanical properties of the arch on frequencies and mode shapes are performed and extensively discussed.

In-Plane Free Vibration of Uniform Circular Arches Made of Axially Functionally Graded Materials

2019 ◽  
Vol 19 (08) ◽  
pp. 1950084 ◽  
Author(s):  
Joon Kyu Lee ◽  
Byoung Koo Lee
Keyword(s):  
Free Vibration ◽  
Young’S Modulus ◽  
Natural Frequencies ◽  
Dynamic Equilibrium ◽  
Young's Modulus ◽  
Mass Density ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Governing Equations ◽  
Direct Integral

This study focused on the in-plane free vibration of uniform circular arches made of axially functionally graded (AFG) materials. Based on the dynamic equilibrium of an arch element, the governing equations for the free vibration of an AFG arch are derived in this study, where arbitrary functions for the Young’s modulus and mass density are acceptable. For the purpose of numerical analysis, quadratic polynomials for the Young’s modulus and mass density are considered. To calculate the natural frequencies and corresponding mode shapes, the governing equations are solved using the direct integral method enhanced by the trial eigenvalue method. For verification purposes, the predicted frequencies are compared to those obtained by the general purpose software ADINA. A parametric study of the end constraint, rotatory inertia, modular ratio, radius parameter, and subtended angle for the natural frequencies is conducted and the corresponding mode shapes are reported.

Multistage Coupling of Eight Mistuned Bladed Disk on a Solid Shaft: Part 1—Free Vibration Analysis

2012 ◽  
Author(s):  
Romuald Rzadkowski ◽  
Artur Maurin
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Free Vibrations ◽  
Rotor Blades ◽  
Mode Shapes ◽  
Bladed Disk ◽  
Centrifugal Stiffening

Considered here was the effect of multistage coupling on the dynamics of a rotor consisting of eight mistuned bladed discs on a solid shaft. Each bladed disc had a different number of rotor blades. Free vibrations were examined using finite element representations of rotating single blades, bladed discs, and the entire rotor. In this study the global rotating mode shapes of eight flexible mistuned bladed discs on shaft assemblies were calculated, taking into account rotational effects such as centrifugal stiffening. The thus obtained natural frequencies of the blade, shaft, bladed disc and entire shaft with discs were carefully examined to discover resonance conditions and coupling effects. This study found that mistuned systems cause far more intensive multistage coupling than tuned ones. The greater the mistuning, the more intense the multistage coupling.

scholarly journals Free Vibrations of Tapered Horseshoe Circular Arch with Constant Volume

2020 ◽  
Vol 10 (16) ◽  
pp. 5431
Author(s):  
Byoung Koo Lee ◽  
Gweon Sik Kim ◽  
Sang Jin Oh ◽  
Tae Eun Lee
Keyword(s):  
Natural Frequencies ◽  
Quadratic Function ◽  
Free Vibrations ◽  
Constant Volume ◽  
Mode Shapes ◽  
Cross Sectional ◽  
Circular Arch ◽  
Taper Function ◽  
Parametric Studies ◽  
Sectional Shape

This paper presents free vibrations of the tapered horseshoe circular arch with a constant volume. The volume of the arch is constant, and the cross-sectional shape of the arch is square and circular. The taper function of the arch is a quadratic function. Differential equations with the boundary conditions that govern the free vibration of such arches are derived and numerically solved to calculate natural frequencies and mode shapes. The natural frequencies of this study agree well with those of the finite element ADINA. Parametric studies of the geometrical and cross-sectional properties of the arch on frequencies and mode shapes are performed and discussed.

scholarly journals An investigation into the free vibrations of carbon nanotubes using analytical and finite element methods

2021 ◽  
Author(s):  
Ishan Ali Khan
Keyword(s):  
Carbon Nanotubes ◽  
Finite Element ◽  
Eigenvalue Problem ◽  
Natural Frequencies ◽  
Nonlinear Eigenvalue Problem ◽  
Dynamic Stiffness ◽  
Free Vibrations ◽  
Mode Shapes ◽  
Wide Range ◽  
Walled Cnts

Since their discovery, immense attention has been given to carbon nanotubes (CNTs), due to their exceptional thermal, electronic and mechanical properties and, therefore, the wide range of applications in which they are, or can be potentially, employed. Hence, it is important that all the properties of carbon nanotubes are studied extensively. This thesis studies the vibrational frequencies of double-walled and triple-walled CNTs, with and without an elastic medium surrounding them, by using Finite Element Method (FEM) and Dynamic Stiffness Matrix (DSM) formulations, considering them as Euler-Bernoulli beams coupled with van der Waals interaction forces. For FEM modelling, the linear eigenvalue problem is obtained using Galerkin weighted residual approach. The natural frequencies and mode shapes are derived from eigenvalues and eigenvectors, respectively. For DSM formulation of double-walled CNTs, a nonlinear eigenvalue problem is obtained by enforcing displacement and load end conditions to the exact solution of single equation achieved by combining the coupled governing equations. The natural frequencies are obtained using Wittrick-Williams algorithm. FEM formulation is also applied to both double and triple-walled CNTs modelled as nonlocal Euler-Bernoulli beam. The natural frequencies obtained for all the cases, are in agreement with the values provided in literature.

scholarly journals On the Finite Element Model of Rotating Functionally Graded Graphene Beams Resting on Elastic Foundation

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Nguyen Van Dung ◽  
Nguyen Chi Tho ◽  
Nguyen Manh Ha ◽  
Vu Trong Hieu
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Elastic Foundation ◽  
Mechanical Response ◽  
Shear Deformation Theory ◽  
Free Vibration Analysis ◽  
Element Model ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Engineering Practice

Rotating structures can be easily encountered in engineering practice such as turbines, helicopter propellers, railroad tracks in turning positions, and so on. In such cases, it can be seen as a moving beam that rotates around a fixed axis. These structures commonly operate in hot weather; as a result, the arising temperature significantly changes their mechanical response, so studying the mechanical behavior of these structures in a temperature environment has great implications for design and use in practice. This work is the first exploration using the new shear deformation theory-type hyperbolic sine functions to carry out the free vibration analysis of the rotating functionally graded graphene beam resting on the elastic foundation taking into account the effects of both temperature and the initial geometrical imperfection. Equations for determining the fundamental frequencies as well as the vibration mode shapes of the beam are established, as mentioned, by the finite element method. The beam material is reinforced with graphene platelets (GPLs) with three types of GPL distribution ratios. The numerical results show numerous new points that have not been published before, especially the influence of the rotational speed, temperature, and material distribution on the free vibration response of the structure.

scholarly journals UNCOUPLED VIBRATIONS IN FUNCTIONALLY GRADED TIMOSHENKO BEAM

2016 ◽  
Vol 54 (6) ◽  
pp. 785 ◽  
Author(s):  
Nguyen Tien Khiem ◽  
Nguyen Ngoc Huyen
Keyword(s):  
Free Vibration ◽  
Timoshenko Beam ◽  
Natural Frequencies ◽  
Flexural Vibration ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Power Law Distribution ◽  
Material Parameters ◽  
Flexural Vibrations ◽  
Fgm Beam

Free vibration of FGM Timoshenko beam is investigated on the base of the power law distribution of FGM. Taking into account the actual position of neutral plane enables to obtain general condition for uncoupling of axial and flexural vibrations in FGM beam. This condition defines a class of functionally graded beams for which axial and flexural vibrations are completely uncoupled likely to the homogeneous beams. Natural frequencies and mode shapes of uncoupled flexural vibration of beams from the class are examined in dependence on material parameters and slendernes

scholarly journals An ES-MITC3 Finite Element Method Based on Higher-Order Shear Deformation Theory for Static and Free Vibration Analyses of FG Porous Plates Reinforced by GPLs

2020 ◽  
Vol 2020 ◽  
pp. 1-18 ◽  
Author(s):  
The-Van Tran ◽  
Tuan-Duy Tran ◽  
Quoc Hoa Pham ◽  
Trung Nguyen-Thoi ◽  
Van Ke Tran
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Free Vibration ◽  
Mass Density ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Dispersion Pattern ◽  
Strain Smoothing ◽  
Triangular Elements ◽  
Element Method

An edge-based smoothed finite element method (ES-FEM) combined with the mixed interpolation of tensorial components technique (MITC) for triangular elements, named as ES-MITC3, was recently proposed to enhance the accuracy of the original MITC3 for analysis of plates and shells. In this study, the ES-MITC3 is extended to the static and vibration analysis of functionally graded (FG) porous plates reinforced by graphene platelets (GPLs). In the ES-MITC3, the stiffness matrices are obtained by using the strain smoothing technique over the smoothing domains created by two adjacent triangular elements sharing an edge. The effective material properties are variable through the thickness of plates including Young’s modulus estimated via the Halpin–Tsai model and Poisson’s ratio and the mass density according to the rule of mixture. Three types of porosity distributions and GPL dispersion pattern into the metal matrix are examined. Numerical examples are given to demonstrate the performance of the present approach in comparison with other existing methods. Furthermore, the effect of several parameters such as GPL weight fraction, porosity coefficient, porosity distribution, and GPL dispersion patterns on the static and free vibration responses of FG porous plates is discussed in detail.

scholarly journals Effect of Location of Delamination on Free Vibration of Cross-Ply Conical Shells

2012 ◽  
Vol 19 (4) ◽  
pp. 679-692 ◽  
Author(s):  
Sudip Dey ◽  
Amit Karmakar
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Natural Frequencies ◽  
Dynamic Equilibrium ◽  
Twist Angle ◽  
Structural Instability ◽  
Numerical Results ◽  
Mode Shapes ◽  
Iteration Algorithm ◽  
Conical Shells

Location of delamination is a triggering parameter for structural instability of laminated composites. In this paper, a finite element method is employed to determine the effects of location of delamination on free vibration characteristics of graphite-epoxy cross-ply composite pre-twisted shallow conical shells. The generalized dynamic equilibrium equation is derived from Lagrange's equation of motion neglecting Coriolis effect for moderate rotational speeds. The formulation is exercised by using an eight noded isoparametric plate bending element based on Mindlin's theory. Multi-point constraint algorithm is utilized to ensure the compatibility of deformation and equilibrium of resultant forces and moments at the delamination crack front. The standard eigen value problem is solved by applying the QR iteration algorithm. Finite element codes are developed to obtain the numerical results concerning the effects of location of delamination, twist angle and rotational speed on the natural frequencies of cross-ply composite shallow conical shells. The mode shapes are also depicted for a typical laminate configuration. Numerical results obtained from parametric studies of both symmetric and anti-symmetric cross-ply laminates are the first known non-dimensional natural frequencies for the type of analyses carried out here.

Free vibration analysis of a rectangular plate carrying multiple various concentrated elements

2003 ◽  
Vol 217 (2) ◽  
pp. 171-183 ◽  
Author(s):  
J-S Wu ◽  
H-M Chou ◽  
D-W Chen
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Rectangular Plate ◽  
Normal Mode ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Equation Of Motion ◽  
Mode Shapes

The dynamic characteristic of a uniform rectangular plate with four boundary conditions and carrying three kinds of multiple concentrated element (rigidly attached point masses, linear springs and elastically mounted point masses) was investigated. Firstly, the closed-form solutions for the natural frequencies and the corresponding normal mode shapes of a rectangular ‘bare’ (or ‘unconstrained’) plate (without any attachments) with the specified boundary conditions were determined analytically. Next, by using these natural frequencies and normal mode shapes incorporated with the expansion theory, the equation of motion of the ‘constrained’ plate (carrying the three kinds of multiple concentrated element) were derived. Finally, numerical methods were used to solve this equation of motion to give the natural frequencies and mode shapes of the ‘constrained’ plate. To confirm the reliability of previous free vibration analysis results, a finite element analysis was also conducted. It was found that the results obtained from the above-mentioned two approaches were in good agreement. Compared with the conventional finite element method (FEM), the approach employed in this paper has the advantages of saving computing time and achieving better accuracy, as can be seen from the existing literature.

Free vibration response of carbon nanotube reinforced pretwisted conical shell under thermal environment

2019 ◽  
Vol 234 (3) ◽  
pp. 770-783 ◽  
Author(s):  
Pabitra Maji ◽  
Mrutyunjay Rout ◽  
Amit Karmakar
Keyword(s):  
Carbon Nanotubes ◽  
Finite Element ◽  
Carbon Nanotube ◽  
Free Vibration ◽  
Conical Shell ◽  
Dynamic Equilibrium ◽  
Thermal Environment ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Mode Shapes

Finite element procedure is employed to analyze the free vibration characteristics of rotating functionally graded carbon nanotubes reinforced composite conical shell with pretwist under the thermal environment. In this paper, four types of carbon nanotube grading are considered, wherein the distribution of carbon nanotubes are made through the thickness direction of the conical shell. An eight-noded isoparametric shell element is used in the present formulation to model the panel based on the first-order shear deformation theory. For moderate rotational speeds, the generalized dynamic equilibrium equation is derived from Lagrange’s equation of motion, neglecting the Coriolis effect. The finite element code is developed to investigate the effect of twist angle, temperature, aspect ratio, and rotational speed on natural frequencies. The mode shapes of a carbon nanotube reinforced functionally graded conical shell at different twist angles and rotational speeds are also presented.

Sign in / Sign up

Export Citation Format

Share Document