scholarly journals Effect of universal adhesive on shear bond strength of metal bracket to enamel and dental amalgam

2021 ◽  
Vol 15 (6) ◽  
pp. 1765-1772
Author(s):  
Shiva Alavi ◽  
Fateme Gharibpour
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Dental Amalgam ◽  
Sem Analysis ◽  
Control Group ◽  
Universal Adhesive ◽  
Diamond Bur ◽  
Etched Surface

background: the bond strength of bracket to the tooth substrate is a critical matter. The different surface treatments are introduced to achieve an appropriate bond strength. We aimed to investigate the shear bond strength(SBS) of metal brackets to amalgam surfaces with universal adhesive and compared the results with the enamel group. Material and methods: in this in-vitro study, eighty specimens of amalgam in four groups and sixty specimens of the enamel in three groups were prepared. In amalgam groups, the control group was sandblasted and treated with transbond Xt whilst the other three groups prepared in the following order, group 2 sandblasted and treated with All Bond Universal(ABU), group 3 using diamond bur and ABU, and group 4 using self-etch mode of ABU. In enamel groups, control group was acid-etched and using transbond XT as a primer; in other two groups, the ABU was used as a primer in etched and self-etched mode. The specimens thermocycled and prepared for the SBS test. SEM analysis and ARI index were performed. pvalue≤ was considered significantly. Results: SBS of enamel was significantly higher than amalgam. Within enamel groups, etched with ABU showed the highest SBS. In amalgam group, the highest SBS was related to surface treated with ABU only, and the lowest SBS was related to diamond bur group. Conclusion: The etched surface of enamel showed the appropriate bond strength to bracket, and in the amalgam group, using mechanical preparation can decrease the oxide layer and compromise amalgam SBS. Keywords: Dental amalgam, Enamel, shear strength, Adhesive

scholarly journals Shear Bond Strength of Three Orthodontic Bonding Systems on Enamel and Restorative Materials

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Andreas Hellak ◽  
Jennifer Ebeling ◽  
Michael Schauseil ◽  
Steffen Stein ◽  
Matthias Roggendorf ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
In Vitro Study ◽  
Control Group ◽  
Metal Composite ◽  
Universal Adhesive ◽  
Restorative Materials ◽  
Bonding Systems

Objective.The aim of this in vitro study was to determine the shear bond strength (SBS) and adhesive remnant index (ARI) score of two self-etching no-mix adhesives (iBond™and Scotchbond™) on different prosthetic surfaces and enamel, in comparison with the commonly used total etch system Transbond XT™.Materials and Methods. A total of 270 surfaces (1 enamel and 8 restorative surfaces,n=30) were randomly divided into three adhesive groups. In group 1 (control) brackets were bonded with Transbond XT primer. In the experimental groups iBond adhesive (group 2) and Scotchbond Universal adhesive (group 3) were used. The SBS was measured using a Zwicki 1120™testing machine. The ARI and SBS were compared statistically using the Kruskal–Wallis test (P≤0.05).Results. Significant differences in SBS and ARI were found between the control group and experimental groups.Conclusions. Transbond XT showed the highest SBS on human enamel. Scotchbond Universal on average provides the best bonding on all other types of surface (metal, composite, and porcelain), with no need for additional primers. It might therefore be helpful for simplifying bonding in orthodontic procedures on restorative materials in patients. If metal brackets have to be bonded to a metal surface, the use of a dual-curing resin is recommended.

scholarly journals Evaluation of metallic brackets adhesion after the use of bleaching gels with and without amorphous calcium phosphate (ACP): in vitro study

2013 ◽  
Vol 18 (3) ◽  
pp. 101-106 ◽  
Author(s):  
Sissy Maria Mendes Machado ◽  
Diego Bruno Pinho do Nascimento ◽  
Robson Costa Silva ◽  
Sandro Cordeiro Loretto ◽  
David Normando
Keyword(s):  
Calcium Phosphate ◽  
Bond Strength ◽  
Amorphous Calcium Phosphate ◽  
Shear Bond Strength ◽  
Mechanical Test ◽  
In Vitro Study ◽  
Control Group ◽  
Test Machine ◽  
Tooth Whitening

OBJECTIVE: To evaluate in vitro the effects of tooth whitening using gel with Amorphous Calcium Phosphate (ACP) on the bond strength of metal brackets. METHODS: Thirty-six bovine incisors were sectioned at the crown-root interface, and the crowns were then placed in PVC cylinders. The specimens were divided into 3 groups (n = 12) according to whitening treatment and type of gel used, as follows: G1 (control) = no whitening; G2 = whitening with gel not containing ACP (Whiteness Perfect - FGM), G3 = whitening with gel containing ACP (Nite White ACP - Discus Dental). Groups G2 and G3 were subjected to 14 cycles of whitening followed by an interval of 15 days before the bonding of metal brackets. Shear bond strength testing was performed on a Kratos universal test machine at a speed of 0.5 mm/min. After the mechanical test, the specimens were assessed to determine the adhesive remnant index (ARI). The results were subjected to ANOVA, Tukey's test and Kruskal-Wallis test (5%). RESULTS: Significant differences were noted between the groups. Control group (G1 = 11.10 MPa) showed a statistically higher shear bond strength than the groups that underwent whitening (G2 = 5.40 Mpa, G3 = 3.73 MPa), which did not differ from each other. There were no significant differences between the groups in terms of ARI. CONCLUSION: Tooth whitening reduces the bond strength of metal brackets, whereas the presence of ACP in the whitening gel has no bearing on the results.

scholarly journals Effects of Universal Adhesive on Shear Bond Strength of Resin Cement to Zirconia Ceramic with Different Surface Treatments

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Zohreh Moradi ◽  
Farnoosh Akbari ◽  
Sara Valizadeh
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
In Vitro Study ◽  
Surface Treatments ◽  
Resin Cement ◽  
Zirconia Ceramic ◽  
Single Bond ◽  
Universal Adhesive

Aim. This study aimed to assess shear bond strength (SBS) of resin cement to zirconia ceramic with different surface treatments by using Single Bond Universal. Methods. In this in vitro study, 50 zirconia discs (2 × 6 mm) were divided into 5 groups of (I) sandblasting with silica-coated alumina (CoJet)  + silane + Single Bond 2, (II) sandblasting with CoJet + Single Bond Universal, (III) sandblasting with alumina + Single Bond Universal, (IV) sandblasting with alumina + Z-Prime Plus, and (V) Single Bond Universal with no surface treatment. Resin cement was applied in plastic tubes (3 × 5 mm2), and after 10,000 thermal cycles, the SBS was measured by a universal testing machine. The mode of failure was determined under a stereomicroscope at × 40 magnification. Data were analyzed using one-way ANOVA. Results. The maximum (6.56 ± 4.29 MPa) and minimum (1.94 ± 1.96 MPa) SBS values were noted in groups III and I, respectively. Group III had the highest frequency of mixed failure (60%). Group V had the maximum frequency of adhesive failure (100%). Conclusion. Single Bond Universal + sandblasting with alumina or silica-coated alumina particles is an acceptable method to provide a strong SBS between resin cement and zirconia.

scholarly journals Effect of different surface treatments on shear bond strength of ceramic brackets to old composite

2020 ◽  
Vol 24 (1) ◽  
Author(s):  
Homa Farhadifard ◽  
Loghman Rezaei-Soufi ◽  
Maryam Farhadian ◽  
Parisa Shokouhi
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Surface Treatments ◽  
Composite Resins ◽  
Control Group ◽  
Composite Restorations ◽  
Ceramic Brackets ◽  
Aged Composite

Abstract Background At present, the demand for orthodontic treatment is on the rise. On the other hand, evidence shows that the bond strength of composite resins to old composite restorations is often unreliable. Therefore, the aim of this in vitro study was to assess the effect of different surface treatments on shear bond strength (SBS) of ceramic brackets to old composite restorations. Methods In this in vitro experimental study, 60 nano-hybrid composite discs were fabricated. For aging, the discs were incubated in deionized water at 37 °C for 1 month. Next, they underwent 4 different surface treatments namely acid etching with 37% phosphoric acid, sandblasting, grinding, and Er,Cr:YSGG laser irradiation. Ceramic brackets were then bonded to the discs and underwent SBS testing. Results The maximum mean SBS value was obtained in the grinding group (9.16 ± 2.49 MPa), followed by the sandblasting (8.13 ± 2.58 MPa) and laser (6.57 ± 1.45 MPa) groups. The minimum mean SBS value was noted in the control group (5.07 ± 2.14 MPa). Conclusion All groups except for the control group showed clinically acceptable SBS. Therefore, grinding, sandblasting, and Er,Cr:YSGG laser are suggested as effective surface treatments for bonding of ceramic orthodontic brackets to aged composite.

Comparative evaluation of shear bond strength of composite to dentin in presence of different dental liners: An in-vitro study

2021 ◽  
Author(s):  
Ladan Ranjbar Omrani ◽  
Saba Tohidkhah ◽  
Elham Ahmadi ◽  
Mahdi Abbasi ◽  
Reza Morvaridi Farimani
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Control Group ◽  
The One ◽  
Post Hoc

Abstract Background: The aim of the current study was to evaluate and compare the influence of Dycal, Lime-lite, Theracal LC, Biodentine, Resin-modified glass ionomer cement (RMGIC), and Activa Bioactive as the pulp capping material on the shear bond strength of resin composite to dentin.Methods: A total of 70 extracted caries-free molars were randomly assigned to seven groups. Six test groups were covered with various protective liners: Dycal (GD), Theracal LC (GT), lime-lite (GL), Activa Bioactive (GA), Biodentine (GB), RMGIC (GR). The control group (GC)received no liner pretreatment. Each sample was bonded to resin composite using the total-etch tetric N bond adhesive. The samples were then tested for shear bond strength using the universal testing machine at a cross-head speed of 1 mm/min until bond failure occurred. The data were analyzed using the one-way ANOVA test followed by the Tamhane post-hoc test for pairwise comparisons of the groupsResults: Independent of the type of the applied liner, all groups exhibited inferior SBS to dentine compared to the control group. GT and GR showed significantly higher shear bond strength than GB and GD, which showed the lowest shear bond strength. GL and GA also had significantly lower SBS results than GT. The mode of fracture was predominantly cohesive in GD, GB, and GT and adhesive in GA.Conclusion: This present study concludes that the bond strength of resin-composite to dentine can be affected differently using various types of liners.

scholarly journals Effect of Contamination with Hemostatic Agent on Shear Bond Strength of Composite to Dentin Using G-Premio and Single Bond Universal Adhesives

2021 ◽  
Author(s):  
Zahra Khamverdi ◽  
Naemeh Karimian ◽  
Maryam Farhadian ◽  
Hamed Gheitouli
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
In Vitro Study ◽  
Hemostatic Agent ◽  
Control Group ◽  
Single Bond ◽  
Failure Data ◽  
Universal Adhesives

Objectives: Bond strength of composite restorations plays an important role in their success. This in vitro study evaluated the effect of a hemostatic agent on shear bond strength of universal adhesives. Materials and Methods: Thirty-six extracted human molars were used in this study. Buccal and lingual surfaces were reduced to obtain flat dentin surfaces and were ground with a silicone paper. The samples were randomly divided into three groups (n=12) based on the application of hemostatic agent: group 1: no contamination (control), group 2: aluminum chloride application, and group 3: ferric sulfate application. Each group was then divided into two subgroups (n=6) for using G-Premio and Single Bond Universal. Resin cylinders (Filtek Z550) were bonded to dentin surfaces according to the manufacturer’s instructions. After 1000 thermal cycles, shear load was applied to the specimens using a universal testing machine at a crosshead speed of 1 mm/min until failure. Data were statistically analyzed using two-way ANOVA and Tukey’s post-hoc test (α=0.05). Results: There were statistically significant differences in shear bond strength of the three main groups for both G-Premio and Single Bond Universal (P<0.05). When the adhesive systems were compared with each other, G-Premio showed higher shear bond strength than Single Bond Universal (P<0.05). Conclusion: Contamination with hemostatic agents had an adverse effect on the shear bond strength of universal adhesives. Moreover, G-Premio yielded a higher bond strength than Single Bond Universal.

scholarly journals Effect of Salivary Contamination on the Bond Strength of Total-etch and Self-etch Adhesive Systems: An in vitro Study

2012 ◽  
Vol 13 (5) ◽  
pp. 655-660 ◽  
Author(s):  
LM Ranganath ◽  
AG Rajesh ◽  
Robert M Justin ◽  
Hemalatha Paranthaman ◽  
Ranjith P Varghese
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Single Bond ◽  
Adhesive Systems ◽  
Bonding Agents ◽  
Dentin Bonding ◽  
Etched Surface ◽  
Self Etch

ABSTRACT Aim To evaluate the influence of salivary contamination during dentin bonding procedures on shear bond strength and to investigate the effect of contaminant-removing treatments on the recovery of bond strength for two dentin-bonding agents. Materials and methods Seventy-seven human maxillary and mandibular molars were randomly divided into two groups for total-etch adhesive (Single bond-3M ESPE, USA) and self-etch primer (UniFil Bond-GC, Tokyo, Japan) and subjected to contamination with saliva. The data for each group were subjected to one-way analysis of variance (ANOVA) followed by the Student Newman-Keuls test to make comparisons among the groups (p < 0.05). Results Salivary contamination had less adverse effect on the shear bond strength of single bond total-etch adhesive when it was blot dried or washed. UniFil bond was tolerant of salivary contamination, except when contamination occurred after application of the primer. Conclusion In single bond adhesive, when the etched surface is contaminated by saliva, blotting the surface and applying the primer can recover the bond strength. Complete drying of the salivary contaminated surface should be avoided. In the UniFil bond groups, the repriming treatment (UF-V and UF-VI) resulted in the recovery of shear bond strength in the specimens contaminated after priming. Clinical significance The results of this study showed that total- etch adhesive (single bond) was not affected by salivary contamination on the etched surface when the bonding surface was kept moist. Self-etch adhesive (UniFil bond) also tolerated salivary contamination except when the contamination occurred after application of the primer. How to cite this article Justin RM, Paranthaman H, Rajesh AG, Varghese RP, Ranganath LM. Effect of Salivary Contamination on the Bond Strength of Total-etch and Selfetch Adhesive Systems: An in vitro Study. J Contemp Dent Pract 2012;13(5):655-660.

scholarly journals Effect of CPP-ACP paste with and without CO2 laser irradiation on demineralized enamel microhardness and bracket shear bond strength

2017 ◽  
Vol 22 (4) ◽  
pp. 53-60 ◽  
Author(s):  
Nasrin Farhadian ◽  
Loghman Rezaei-Soufi ◽  
Seyed Farzad Jamalian ◽  
Maryam Farhadian ◽  
Shahrzad Tamasoki ◽  
...  
Keyword(s):  
Bond Strength ◽  
Laser Irradiation ◽  
Co2 Laser ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Enamel Surface ◽  
Control Group ◽  
Demineralized Enamel ◽  
Group 2

ABSTRACT Introduction: Many patients seeking orthodontic treatment already have incipient enamel lesions and should be placed under preventive treatments. The aim of this in vitro study was to evaluate the effect of CPP-ACP paste and CO2 laser irradiation on demineralized enamel microhardness and shear bond strength of orthodontic brackets. Methods: Eighty caries-free human premolars were subjected to a demineralization challenge using Streptococcus mutans. After demineralization, the samples were randomly divided into five equal experimental groups: Group 1 (control), the brackets were bonded without any surface treatment; Group 2, the enamel surfaces were treated with CPP-ACP paste for 4 minutes before bonding; Group 3, the teeth were irradiated with CO2 laser beams at a wavelength of 10.6 µm for 20 seconds. The samples in Groups 4 and 5 were treated with CO2 laser either before or through CPP-ACP application. SEM photomicrographs of a tooth from each group were taken to observe the enamel surface. The brackets were bonded to the buccal enamel using a conventional method. Shear bond strength of brackets and ARI scores were measured. Vickers microhardness was measured on the non-bonded enamel surface. Data were analyzed with ANOVA and Tukey test at the p< 0.05 level. Results: The mean shear bond strength and microhardness of the laser group were higher than those in the control group and this difference was statistically significant (p< 0.05). All groups showed a higher percentage of ARI score 4. Conclusion: CO2 laser at a wavelength of 10.6 µm significantly increased demineralized enamel microhardness and enhanced bonding to demineralized enamel.

scholarly journals Effect of surface roughness on amalgam repair using adhesive systems

2002 ◽  
Vol 13 (3) ◽  
pp. 179-183 ◽  
Author(s):  
Marcelo Giannini ◽  
Luis Alexandre Maffei Sartini Paulillo ◽  
Gláucia Maria Bovi Ambrosano
Keyword(s):  
Surface Roughness ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Surface Treatments ◽  
Vitro Study ◽  
Adhesive Systems ◽  
Diamond Bur ◽  
Effect Of Surface

The objective of this in vitro study was to evaluate the effect of three surface treatments and two adhesive systems on the shear bond strength of old and freshly placed amalgam. The results suggested that the intact amalgam showed a significantly higher strength than repaired groups and the strongest repaired specimens were made when the amalgam surfaces were roughened with a diamond bur or microetcher. The adhesive systems showed no significant differences on bond strength with the same superficial texture.

Sign in / Sign up

Export Citation Format

Share Document