metal composite
Recently Published Documents


TOTAL DOCUMENTS

1752
(FIVE YEARS 413)

H-INDEX

52
(FIVE YEARS 10)

Author(s):  
Yousef Safari ◽  
Nadia Naghavi ◽  
Mohsen Malayjerdi ◽  
Hadi Kalani

Aquatic environments and water resources face a variety of risks from numerous sources of pollution. In this paper, we propose a preliminary mechanism for realizing robotic technology practically and cost-effectively for monitoring these pollutions. The presented system is a small robotic fish propelled by a beam of ionic polymer-metal composite (IPMC) artificial muscle that imitates the motion of a small Scorpis Georgiana fish. One of the superiorities of the proposed model is the IPMC actuation mechanism powered by a battery that is charged wirelessly from a solar panel source. This approach enables us to produce a robotic fish that works ceaselessly without being forced to carry the solar panel load. Moreover, we present a method to control the flapping motion of a robotic fish by taking advantage of a tiny Wi-Fi module that yields more working range, bulky data sending, low power consumption, simple programing, and convenient communication for creating a network with other similar robots. All these beneficial characteristics make the proposed structure a promising candidate for detecting pollution on the surface of aquatic environments and sending/recording necessary data in collaboration with desirable sensors. Theoretical considerations support experimental results reported in the paper.


Author(s):  
Jiang-Nan Fu ◽  
Xing Wang ◽  
Meng Yang ◽  
You-Rong Chen ◽  
Ji-Ying Zhang ◽  
...  

Over centuries, several advances have been made in osteochondral (OC) tissue engineering to regenerate more biomimetic tissue. As an essential component of tissue engineering, scaffolds provide structural and functional support for cell growth and differentiation. Numerous scaffold types, such as porous, hydrogel, fibrous, microsphere, metal, composite and decellularized matrix, have been reported and evaluated for OC tissue regeneration in vitro and in vivo, with respective advantages and disadvantages. Unfortunately, due to the inherent complexity of organizational structure and the objective limitations of manufacturing technologies and biomaterials, we have not yet achieved stable and satisfactory effects of OC defects repair. In this review, we summarize the complicated gradients of natural OC tissue and then discuss various osteochondral tissue engineering strategies, focusing on scaffold design with abundant cell resources, material types, fabrication techniques and functional properties.


Ionics ◽  
2022 ◽  
Author(s):  
Yue Zhou ◽  
Jiafeng Yuan ◽  
Ruoyu Dong ◽  
Yixiao Fu ◽  
Jianbin Zhou ◽  
...  

Author(s):  
Çağrı Oruç ◽  
Okan Özdemir

Control arms are subjected to static and dynamic loads in car during their lifetime. Recent increases in loads in which control arms are subjected, are not complying with the low-weight design targets expected by auto makers. In this study, buckling behavior of control arms which have been produced with Si particle reinforced aluminum based metal composite material have been investigated and compared with the performance of control arms that are produced with standard aluminum alloy. The results revealed that mechanical properties of control arm housings with 10% Sip MMC material are lower than standard 6110 alloy due to different process parameters. Elasticity of modulus of control arm housings with 10% Sip MMC material are approximately 7% higher than standard aluminum alloys. Buckling results of control arms with 10% Sip MMC material are around 25% lower that control arms with standard 6110 alloy. Also, a second darker phase was found in the microstructure.


Author(s):  
Zakai Olsen ◽  
Kwang Jin Kim

Abstract As the field of soft robotics grows and new applications for this technology are discovered, the use of simplified models for the soft actuators found in these devices will be critical. In this study we explore arguments based on the magnitude of field gradients that arise in the ionic polymer-metal composite under large applied voltages and their use for approximating measures of the fields inside the polymer. Using the order-of-magnitude based arguments provides exceptional results for quantifying the field measures of maximum ionic concentration and electric potential within the bulk of the polymer. These measures are leveraged to reconstruct the fields themselves in such a way that the internal bending moments generated inside the actuator may be approximated. With the internal moments, a simplified kinematic model may be used to formulate the steady-state actuator response of the IPMC. This actuator model shows a great deal of accuracy as compared to a full multiphysics model, and we discuss the prospects for future development of this model to account for dynamic actuation.


2021 ◽  
Vol 23 (1) ◽  
pp. 347
Author(s):  
Mohamed Gamal Mohamed ◽  
Maha Mohamed Samy ◽  
Tharwat Hassan Mansoure ◽  
Chia-Jung Li ◽  
Wen-Cheng Li ◽  
...  

There is currently a pursuit of synthetic approaches for designing porous carbon materials with selective CO2 capture and/or excellent energy storage performance that significantly impacts the environment and the sustainable development of circular economy. In this study we prepared a new bio-based benzoxazine (AP-BZ) in high yield through Mannich condensation of apigenin, a naturally occurring phenol, with 4-bromoaniline and paraformaldehyde. We then prepared a PA-BZ porous organic polymer (POP) through Sonogashira coupling of AP-BZ with 1,3,6,8-tetraethynylpyrene (P-T) in the presence of Pd(PPh3)4. In situ Fourier transform infrared spectroscopy and differential scanning calorimetry revealed details of the thermal polymerization of the oxazine rings in the AP-BZ monomer and in the PA-BZ POP. Next, we prepared a microporous carbon/metal composite (PCMC) in three steps: Sonogashira coupling of AP-BZ with P-T in the presence of a zeolitic imidazolate framework (ZIF-67) as a directing hard template, affording a PA-BZ POP/ZIF-67 composite; etching in acetic acid; and pyrolysis of the resulting PA-BZ POP/metal composite at 500 °C. Powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller (BET) measurements revealed the properties of the as-prepared PCMC. The PCMC material exhibited outstanding thermal stability (Td10 = 660 °C and char yield = 75 wt%), a high BET surface area (1110 m2 g–1), high CO2 adsorption (5.40 mmol g–1 at 273 K), excellent capacitance (735 F g–1), and a capacitance retention of up to 95% after 2000 galvanostatic charge–discharge (GCD) cycles; these characteristics were excellent when compared with those of the corresponding microporous carbon (MPC) prepared through pyrolysis of the PA-BZ POP precursors with a ZIF-67 template at 500 °C.


Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 80
Author(s):  
Dongxu Zhao ◽  
Jie Ru ◽  
Tong Wang ◽  
Yanjie Wang ◽  
Longfei Chang

Current ionic polymer-metal composite (IPMC) always proves inadequate in terms of large attenuation and short working time in air due to water leakage. To address this problem, a feasible and effective solution was proposed in this study to enhance IPMC performance operating in air by doping polyethylene oxide (PEO) with superior water retention capacity into Nafion membrane. The investigation of physical characteristics of membranes blended with varying PEO contents revealed that PEO/Nafion membrane with 20 wt% PEO exhibited a homogeneous internal structure and a high water uptake ratio. At the same time, influences of PEO contents on electromechanical properties of IPMCs were studied, showing that the IPMCs with 20 wt% PEO presented the largest peak-to-peak displacement, the highest volumetric work density, and prolonged stable working time. It was demonstrated that doping PEO reinforced electromechanical performances and restrained displacement attenuation of the resultant IPMC.


Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7906
Author(s):  
Walid Mohamed Daoush ◽  
Turki Saad Alkhuraiji ◽  
Abdulrahman Dohymish Alshammri

Polycrystalline cBN/copper composite abrasive particles were prepared by an electroless powder coating process. Ti metallization and tin/silver metallization techniques were used to improve the coating process by depositing an autocatalytic metallic layer on the surface of the cBN particles. Metallized, as well as un-metallized, cBN particles were further coated by copper using electroless deposition. Electroless copper coating of un-metallized and metallized cBN particles by 90 wt.% of copper were achieved. The surface morphology, the composition and the crystalline phase identifications of the metallized cBN particles, as well as the 10 wt.% cBN /copper composite powders, were investigated by field emission scanning electron microscopy, an energy-dispersive spectrometer and an X-ray diffractometer. The results show that the surface of the Ti metalized and tin/Ag-metallized cBN particles were covered by the nanosized Ti or Ag layer, respectively, which enhanced the deposition of the copper during the electroless deposition bath. The results also showed that the deposited layer on the metallized cBN particles was composed mainly of metallic copper. The produced 10 wt.% cBN/copper composite particles also underwent thermo-gravimetric analysis to investigate its stability at high temperature. It was revealed that the Ti-metallized cBN/copper composite powder has higher stability at 800 °C under the environmental conditions than the tin/silver-metallized and the un-metallized cBN/copper composite particles, respectively.


Sign in / Sign up

Export Citation Format

Share Document