DEVELOPMENT AND VALIDATION OF NEW RP-HPLC METHOD FOR QUANTITATIVE ESTIMATION OF VITAMIN-D3 IN BULK DRUG AND PHARMACEUTICAL DOSAGE FORM

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (06) ◽  
pp. 40-45
Author(s):  
T Mohan ◽  
◽  
S Prabhakara ◽  
K Anbazhagan ◽  
Krishnan Pavithra ◽  
...  
Keyword(s):  
Vitamin D3 ◽  
Dosage Form ◽  
Quantitative Estimation ◽  
Hplc Method ◽  
Control Analysis ◽  
Uv Detector ◽  
Pharmaceutical Dosage Form ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc ◽  
Bulk Drug

An accurate, simple, rapid, sensitive and cost effective method for the determination of Vitamin-D3 in pharmaceutical dosage form was developed and validated by RP-HPLC method. Chromatographic separation was achieved on phenomenex C18 column (150 mm X 4.6 mm, 5μm) using methanol: acetonitrile: water (90:5:5 V/V/V) as mobile phase, at a flow rate of 1.5 mL/min. The retention time of Vitamin-D3 was found to be 8.3 minutes; the detection was monitored at 265 nm by using UV detector. The developed method was validated according to International Conference on Harmonization (ICH) guidelines. The linearity of Vitamin-D3 was in the range of 2.50 ppm to 6.00 ppm. This method showed an excellent linear response with the correlation coefficient (R2) value of 0.999 for the Vitamin-D3. The recovery of the drug ranged from 99.59% to 103.83% with an average of 101.34%. The percentage RSD was found to be less than two, indicating high degree of accuracy and precision of the proposed RPHPLC method. Due to simplicity, cost effectiveness, rapidity and accuracy of the method, we believe that the method will be useful for routine quality control analysis of Vitamin-D3 in bulk drug and pharmaceutical dosage forms.

Development and Validation of a Stability Indicating RP-HPLC Method for the Determination of Imatinib Mesylate

2017 ◽  
Vol 8 (01) ◽  
Author(s):  
Y. Rajesh Babu ◽  
N. Appalaraju
Keyword(s):  
Imatinib Mesylate ◽  
Dosage Form ◽  
Hplc Method ◽  
Pharmaceutical Dosage Form ◽  
Pharmaceutical Dosage Forms ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Bulk Drug ◽  
The Stability

The aim of this paper was to develop and validate the stability indicating RP-HPLC method for the determination of Imatinib mesylate in bulk and pharmaceutical dosage forms. A simple, accurate, precise, sensitive and stability indicating RP-HPLC method has been developed for the determination of Imatinib mesylate in bulk drug and pharmaceutical dosage form, in which separations are done using develosil C18, 5μm, 150 × 4.6mm i.d. column at a flow rate of 1.0mL/min with an injection volume of 20μL. The beer’s law was obeyed over the concentration range of 5 - 35μg/mL. The correlation coefficient was found to be 0.996 and it showed good linearity, reproducibility, precision in this concentration range. The % recovery values were found to be within the limits, which showed that the method was accurate. The LOD and LOQ were calculated using statistical methods. The % RSD values were less than 2. The developed method was successfully applied for determination of Imatinib mesylate in pharmaceutical dosage form. The results obtained are in good agreement with those obtained by using the standard method.

New RP-HPLC Method Development and Validation for the Determination of Pazopanib Hydrochloride in Tablet Dosage Form

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Rajesh Babu Y. ◽  
Appala Raju N.
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Hplc Method ◽  
Pharmaceutical Dosage Form ◽  
Pharmaceutical Dosage Forms ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Bulk Drug ◽  
The Stability

The aim of this paper was to develop and validate the stability indicating RP-HPLC method for the determination of Pazopanib hydrochloride in bulk and pharmaceutical dosage forms. A simple, accurate, precise, sensitive and stability indicating RP-HPLC method has been developed for the determination of Pazopanib hydrochloride in bulk drug and pharmaceutical dosage form, in which separations are done using develosil C18, 5μm, 150 × 4.6mm i.d. column at a flow rate of 1.0mL/min with an injection volume of 20μL. The beer’s law was obeyed over the concentration range of 5 - 35μg/mL. The correlation coefficient was found to be 0.996 and it showed good linearity, reproducibility, precision in this concentration range. The % recovery values were found to be within the limits, which showed that the method was accurate. The LOD and LOQ were calculated using statistical methods. The % RSD values were less than 2. The developed method was successfully applied for determination of Pazopanib hydrochloride in pharmaceutical dosage form. The results obtained are in good agreement with those obtained by using the standard method.

scholarly journals Development and validation of RP-HPLC method for estimation of brexpiprazole in its bulk and tablet dosage form using Quality by Design approach

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Amol S. Jagdale ◽  
Nilesh S. Pendbhaje ◽  
Rupali V. Nirmal ◽  
Poonam M. Bachhav ◽  
Dayandeo B. Sumbre
Keyword(s):  
Flow Rate ◽  
High Performance ◽  
Reversed Phase ◽  
Hplc Method ◽  
Control Analysis ◽  
Uv Detector ◽  
Mobile Phase Flow Rate ◽  
Rp Hplc ◽  
Quality By Design Approach ◽  
Bulk Drug

Abstract Background A new, sensitive, suitable, clear, accurate, and robust reversed-phase high-performance liquid chromatography (RP-HPLC) method for the determination of brexpiprazole in bulk drug and tablet formulation was developed and validated in this research. Surface methodology was used to optimize the data, with a three-level Box-Behnken design. Methanol concentration in the mobile phase, flow rate, and pH were chosen as the three variables. The separation was performed using an HPLC method with a UV detector and Openlab EZchrom program, as well as a Water spherisorb C18 column (100 mm × 4.6; 5m). Acetonitrile was pumped at a flow rate of 1.0 mL/min with a 10 mM phosphate buffer balanced to a pH of 2.50.05 by diluted OPA (65:35% v/v) and detected at 216 nm. Result The developed RP-HPLC method yielded a suitable retention time for brexpiprazole of 4.22 min, which was optimized using the Design Expert-12 software. The linearity of the established method was verified with a correlation coefficient (r2) of 0.999 over the concentration range of 5.05–75.75 g/mL. For API and formulation, the percent assay was 99.46% and 100.91%, respectively. The percentage RSD for the method’s precision was found to be less than 2.0%. The percentage recoveries were discovered to be between 99.38 and 101.07%. 0.64 μg/mL and 1.95 μg/mL were found to be the LOD and LOQ, respectively. Conclusion The developed and validated RP-HPLC system takes less time and can be used in the industry for routine quality control/analysis of bulk drug and marketed brexpiprazole products. Graphical abstract

scholarly journals A A RAPID AND SENSITIVE RP-HPLC METHOD FOR THE QUANTITATIVE ANALYSIS OF EMPAGLIFLOZIN IN BULK AND PHARMACEUTICAL DOSAGE FORM

2019 ◽  
pp. 60-65
Author(s):  
MADHURIMA BASAK ◽  
Santhosh Reddy Gouru ◽  
Animesh Bera ◽  
Krishna veni Nagappan
Keyword(s):  
Quantitative Analysis ◽  
High Performance ◽  
Dosage Form ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Reverse Phase ◽  
Pharmaceutical Dosage Form ◽  
Rp Hplc ◽  
Limit Of Quantitation ◽  
Bulk Drug

Objective: The present study aims at developing an accurate precise, rapid and sensitive Reverse Phase High-Performance Liquid Chromatography (RP-HPLC) method for assessing Empagliflozin in bulk drug and in the pharmaceutical dosage form. Methods: The proposed method employs a Reverse Phase Shim Pack C18 column (250 mm × 4.6 mm id; 5 µm) using a mobile phase comprising of acetonitrile and water in the ratio of 60:40 v/v flushed at a flow rate of 1 ml/min. The eluents were monitored at 223 nm. Results: Empagliflozin was eluted at a retention time of 5.417 min and established a co-relation co-efficient (R2>0.999) over a concentration ranging from 0.0495-100µg/ml. Percentage recovery was obtained between 98-102% which indicated that the method is accurate. The Limit of Detection (LOD) and Limit of Quantitation (LOQ) were found at 0.0125µg/ml and 0.0495µg/ml, respectively. Conclusion: An RP-HPLC method which was relatively simple, accurate, rapid and precise was developed and its validation was performed for the quantitative analysis of empagliflozin in bulk and tablet dosage form (10 and 25 mg) in accordance to International Conference of Harmonization (ICH) Q2 (R1) guidelines. The proposed method may aid in routinely analyzing empagliflozin in pharmaceuticals.

NEW VALIDATED RP-HPLC METHOD FOR THE DETERMINATION OF RIZATRIPTAN BENZOATE IN BULK AND PHARMACEUTICAL DOSAGE FORM

INDIAN DRUGS ◽  
2014 ◽  
Vol 51 (12) ◽  
pp. 32-36
Author(s):  
T. Vishalakhi ◽  
◽  
S. K Kumar ◽  
K Sujana ◽  
P Rani
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Hplc Method ◽  
Detector Response ◽  
Mobile Phase Flow Rate ◽  
Pharmaceutical Dosage Form ◽  
Rizatriptan Benzoate ◽  
Rp Hplc ◽  
Bulk Drug

A simple validated RP HPLC method for the estimation of rizatriptan benzoate in pharmaceutical dosage form and bulk was developed for routine analysis. This method was developed by selecting Agilent TC C18 (250 x 4.6 mm, 5 μ) column as stationary phase and acrylonibrile:water (45:55), pH adjusted to 3, as mobile phase. Flow rate of mobile phase was maintained at 4: 1 mL/min at ambient temperature throughout the experiment. Quantification was achieved with ultraviolet (DAD) detection at 220 nm. The retention time obtained for rizatriptan was 2.8 min. The detector response was linear in the concentration range of 2-25μg/mL. This method was validated and shown to be specific, sensitive, precise, linear, accurate, rugged and robust. Hence, this method can be applied for routine quality control of rizatriptan benzoate in dosage forms as well as in bulk drug.

scholarly journals METHOD DEVELOPMENT AND VALIDATION FOR THE ESTIMATION OF ENTECAVIR IN BULK AND PHARMACEUTICAL DOSAGE FORMS BY RP-HPLC

2017 ◽  
pp. 107-111
Author(s):  
Swathi P. ◽  
S. Vidyadhara ◽  
R. L. C. Sasidhar ◽  
K. Kalyan Chakravarthi
Keyword(s):  
Flow Rate ◽  
Dosage Forms ◽  
Hplc Method ◽  
Forced Degradation ◽  
Uv Detector ◽  
Pharmaceutical Dosage Form ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc ◽  
Validation Parameters ◽  
Degradation Studies

Objective: The objective and purpose of the analysis have sensibly assessed by selecting of a rapid and sensitive RP-HPLC method for Entecavir in bulk and pharmaceutical dosage form by using the most commonly employed C-18column with UV detection.Methods: In estimation by RP-HPLC method Agilent 1120 compact LC system with variable programmable UV detector and Rheodyne injector with 20 µl fixed loop was used for the chromatographic separation. The mode of operation was isocratic with the components of a solution consisting of methanol: acetonitrile(70:30v/v) and triethanolamine (2-4drops)at the flow rate of 1.2 ml/min and run time was 10 min. Forced degradation studies were conducted to evaluate the stability and specificity of the method along with the validation parameters.Results: Validation parameters of HPLC were found at a detection wavelength of 255 nm. Linearity was observed with the concentration range (Beer’s law range) 20-100µg/ml with R2=0.9991. Robustness with detection wavelengths 253 and 257 nm with a flow rate of 1 ml/min and 1.4 ml/min showed good results. The retention time of the drug was 2.64 min and assay showed 98.1%.Conclusion: The proposed RP-HPLC method was validated as per the ICH Q2B Guidelines, and was found to be applicable for routine quantitative analysis of Entecavir by RP-HPLC using UV detector in pharmaceutical dosage forms. The results of linearity, precision, accuracy and specificity, were proved, that does not exceed certain specified limits. The method provides selective quantification with no interference from other formulation excipients. The proposed method was highly sensitive, reproducible, reliable, robust and specific. Therefore, this method is a simple, rapid analysis may actually be more desirable than a more complicated and time-consuming process. The degradation studies at various stress conditions like thermal and hydrolytic, drug gets degraded at a temperature of 80 °c and refluxing with water at 70 °c for 24hours. 

Simultaneous determination of Sulphadoxine and Pyrimethamine by taking Tolterodine as an internal standard in Pharmaceutical dosage form by RP-HPLC

2021 ◽  
pp. 145-150
Author(s):  
Sushil D. Patil ◽  
Pravin B. Shelke ◽  
Priti Aher ◽  
Maswood Ahmed Hafizur Rahman
Keyword(s):  
Simultaneous Determination ◽  
Dosage Form ◽  
Internal Standard ◽  
Hplc Method ◽  
Control Analysis ◽  
Pharmaceutical Dosage Form ◽  
Quality Control Analysis ◽  
Rp Hplc ◽  
Sulphadoxine Pyrimethamine

A simple, rapid, economic, sensitive and precise HPLC method has been developed for the simultaneous determination of Sulphadoxine and Pyrimethamine in pharmaceutical dosage form by taking Tolterodine as an internal standard. The method was carried out using Phenomenex C18 (4.6ID × 250mm; 5µm) column and mobile phase comprised of methanol and Phosphate Buffer in proportion of ratio 60:40 v/v. The flow rate was 1.0mL/min and detection was carried out at 276nm. The retention time of Sulphadoxine, Pyrimethamine and Tolterodine were found to be 2.967, 4.058 and 6.908 respectively. Linearity of Sulphadoxine and Pyrimethamine in the range of 2 to 12μg/mL and 4 to 24μg/mL respectively. The % recoveries of Sulphadoxine and Pyrimethamine were found to be in between 99.93% to 99. 96 % respectively. The proposed method is suitable for the routine quality control analysis for simultaneous determination of Sulphadoxine and Pyrimethamine was in bulk and pharmaceutical dosage form.

Development and validation of RP-HPLC/UV methods for the estimation of Risedronate sodium in pure and pharmaceutical dosage form

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Ananda Thangadurai Subramaniam ◽  
Devi Velmurugan ◽  
Sambathkumar Ramanathan ◽  
Kamalakannan Dhanabalan ◽  
Jambulingam Munusamy ◽  
...  
Keyword(s):  
Dosage Form ◽  
Uv Spectroscopy ◽  
Hplc Method ◽  
Dilution Method ◽  
Control Analysis ◽  
Pharmaceutical Dosage Form ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Development And Validation ◽  
Tablet Dosage

Recent study was conducted to develop and validate analytical methods for estimation of Risedronate sodium in pure and pharmaceutical dosage form using UV Spectroscopy and               RP- HPLC method. The first method (Method A) based on the UV Spectroscopy using 0.1M Hcl as diluent lambda max was found at 261 nm. Linearity existed perceived in the concentration between 10-50 μg/ml (r 2 = 0.999) for the method. The method was validated pertaining to linearity, precision and accuracy studies, LOD and LOQ consistent with ICH guidelines. The second method (Method B), based on determination of Risedronate sodium tablet dosage form by RP-HPLC method.  Chromatography separation was carried out on a C18 (150X4.6 mm x5 µ) SS Column using Methanol: Ammonium formate (85:15) as the mobile phase at a flow rate of   1.0 ml/min. The chromatographic analysis was carried out in the reflectance and absorbance mode at 254 nm and retention time of the drug was found to be 1.11 ml/min for standard and tablet. Linear responses of the drug were in the concentration range of 200-1000 µg/ml. The accuracy of the method was assessed by standard dilution method and found to be 98% to              102% .The results of the analysis were validated statistically prism software. The method established was found to be simple, precise, linear, accurate and sensitive. The developed method can be used for routine quality control analysis of Risedronate sodium in pure and pharmaceutical dosage form.

Sign in / Sign up

Export Citation Format

Share Document