RP-HPLC METHOD FOR SIMULTANEOUS ESTIMATION OF ASPIRIN AND OMEPRAZOLE IN BINARY COMBINATION

INDIAN DRUGS ◽  
2018 ◽  
Vol 55 (08) ◽  
pp. 38-43
Author(s):  
A. M Kashid ◽  
◽  
S. V. Tathe ◽  
S. G. Sahoo ◽  
A. B. Ghatge ◽  
...  
Keyword(s):  
Mobile Phase ◽  
Correlation Coefficients ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Sodium Acetate Buffer ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Precision Study ◽  
The Mean

A simple, accurate, rapid and precise RP-HPLC method for the simultaneous estimation of aspirin and Omeprazole in binary mixture has been developed and validated. The drugs were resolved using HPLC column (ACE 250 x 4.6 mm C18 column) with mobile phase of HPLC grade methanol: Sodium acetate buffer (70:30 v/v) at a flow rate of 1 mL/min. The retention times of aspirin and omeprazole were 3.10 ± 0.3min and 5.01 ± 0.02min with UV detection at 230 nm. The method was validated with respect to linearity, sensitivity, accuracy, precision and robustness as per the International Conference on Harmonization (ICH) guidelines. The method was specific and it was observed that no interference with diluents. The linearity was established over the concentration range of 40-140μg/ml and 20-120μg/mL with correlation coefficients (r2) 0.9998 and 0.9986 for aspirin andomeprazole magnesium respectively. The mean recoveries were found to be in the range of 97.05%-99.75% and 97.21% -98.76% for aspirin and omeprazole respectively. The % R.S.D. values for intra-day precision study and inter-day study were <1.0%, confirming that the method is precise. The method can be successfully employed for the simultaneous determination of aspirin and omeprazole.

scholarly journals Stability indicating RP-HPLC method for the estimation of flucloxacillin sodium in a tablet dosage form

2020 ◽  
Vol 1 (4) ◽  
pp. 95-100
Author(s):  
Sonalika Patro ◽  
S. Harshith Kumar ◽  
M. Barath kumar ◽  
E. Masthaniah ◽  
K. Sairam ◽  
...  
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Theoretical Plate ◽  
Hplc Method ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
System Suitability ◽  
Precision Study ◽  
Tablet Dosage

A Simple, accurate and precise method was developed and validated for the determination of flucloxacillin sodium in its tablet dosage form. The separation was eluted on xterra c18 column (4.6x150mm, 5micron) using a mixture of octane buffer and methanol as mobile phase in a ratio of (30:70) which was pumped through column at a flow rate of  1ml/min. Optimised wavelength for flucloxacillin was 237nm, the retention time was 2.305minutes and the percentage purity was found to be 98.14%. System suitability parameters such as theoretical plate and tailing factor for flucloxacillin sodium was found to be 2991.64 and 1.90 respectively, the proposed method was validated as per ICH guidelines (ICH, Q2 AND (R1)) the method was found to be linear at the concentration range of 20-100µg/ml and the correlation coefficient (r2) value was found to be 0.9994 percentage RSD for precision was 0.9% and percentage RSD for ruggedness was 0.5%. The precision study was precise, robust and repeatable. The LOD and LOQ values are 2.98 and 9.98 respectively. Hence the suggested RP-HPLC method can be used for routine analysis for flucloxacillin sodium in tablet dosage form.

scholarly journals A Validated RP-HPLC Method for Simultaneous Estimation of Atenolol and Indapamide in Pharmaceutical Formulations

2011 ◽  
Vol 8 (3) ◽  
pp. 1238-1245 ◽  
Author(s):  
G. Tulja Rani ◽  
D. Gowri Sankar ◽  
P. Kadgapathi ◽  
B. Satyanarayana
Keyword(s):  
Particle Size ◽  
Mobile Phase ◽  
Dosage Form ◽  
Orthophosphoric Acid ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Rp Hplc ◽  
Ich Guidelines

A simple, fast, precise, selective and accurate RP-HPLC method was developed and validated for the simultaneous determination of atenolol and indapamide from bulk and formulations. Chromatographic separation was achieved isocratically on a Waters C18 column (250×4.6 mm, 5 µ particle size) using a mobile phase, methanol and water (adjusted to pH 2.7 with 1% orthophosphoric acid) in the ratio of 80:20. The flow rate was 1 mL/min and effluent was detected at 230 nm. The retention time of atenolol and indapamide were 1.766 min and 3.407 min. respectively. Linearity was observed in the concentration range of 12.5-150 µg/mL for atenolol and 0.625-7.5 µg/mL for indapamide. Percent recoveries obtained for both the drugs were 99.74-100.06% and 98.65-99.98% respectively. The method was validated according to the ICH guidelines with respect to specificity, linearity, accuracy, precision and robustness. The method developed can be used for the routine analysis of atenolol and indapamide from their combined dosage form.

scholarly journals DEVELOPMENT AND VALIDATION OF A RP-HPLC METHOD FOR DETERMINATION OF ERDAFITINIB IN MARKETED FORMULATIONS

2020 ◽  
Vol 9 (3) ◽  
Author(s):  
M. Maithani ◽  
D. Dwivedi ◽  
D. Hatwal ◽  
P. Bansal
Keyword(s):  
Mobile Phase ◽  
Pharmaceutical Preparations ◽  
Hplc Method ◽  
Sodium Acetate Buffer ◽  
Rp Hplc ◽  
The Mean ◽  
Uv Visible ◽  
Development And Validation ◽  
Tablet Dosage

A simple and precise RP-HPLC method for the estimation of Erdafitinib in tablet dosage form was developed and validated. The chromatographic separation of the drug was done with a Hypersil™ ODS C18 Column (150 mm × 4.6 mm i.d., particle size 5 μ) using 20mM sodium acetate buffer (pH 4. ±0.02), methanol and acetonitrile (60:10:30 v/v/v) as a mobile phase. The instrument was set at flow rate of 1.0 mLmin-1 at ambient temperature and the wavelength of UV-visible detector at 310nm. The method showed excellent linearity over a range of 5-35 μgmL-1 for the drug. The correlation coefficient for Erdafitinib was noted to be 0.9999. The mean recovery values were found to be 99.77% and 100.88%. The results suggest that the proposed method could be suitable for quantitative determination of Erdafitinib in pharmaceutical preparations and also for quality control in bulk manufacturing. The F-test and t-test at 95% confidence level were applied on data for statistical analysis.

scholarly journals Experimental design optimization of RP-HPLC method for simultaneous estimation of metsulfuron-methyl, chlorantraniliprole and chlorimuron-ethyl residues in stems of Oryza sativa

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Shanta Kumari Adiki ◽  
Prakash Katakam ◽  
Fathi H. Assaleh
Keyword(s):  
Oryza Sativa ◽  
Pesticide Residues ◽  
Mobile Phase ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Metsulfuron Methyl ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Chlorimuron Ethyl

Abstract Background The study aims to develop a chemometrics optimized D-optimal mixture design approach assisted RP- HPLC method for the determination of pesticide residues of metsulfuron-methyl, chlorantraniliprole, and chlorimuron-ethyl in the stems of Oryza sativa. Chromatographic separation was achieved on a C18 column using a mobile phase consisting of a pH 3.5 phosphate buffer and acetonitrile in the ratio 85:15. Results The optimized HPLC method gave a sharp resolution of metsulfuron-methyl, chlorantraniliprole and chlorimuron-ethyl at a retention time of 2.599 min, 3.805 min and 4.661 min receptively. Linearity was observed in the range 100‒500 µg/mL for metsulfuron-methyl (r2 = 0.999), 4‒20 µg/mL for chlorantraniliprole (r2 = 0.999) and 100‒500 µg/mL for chlorimuron-ethyl (r2 = 0.999). The developed method was validated as per ICH guidelines. Conclusion The proposed chemometrics optimized RP-HPLC method was found to be successful in the resolution of pesticide residues in the stems of O. sativa. The developed method can be applied to routine quantification of metsulfuron-methyl, chlorantraniliprole and chlorimuron-ethyl.

QBD BASED RP-HPLC METHOD FOR SCREENING AND ANALYSIS OF TELAPRAVIR AND 7 OTHER ANTIRETROVIRAL AGENTS

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (02) ◽  
pp. 20-33
Author(s):  
N. S Kumar ◽  
◽  
R Kumaraswamy ◽  
S. Shantikumar ◽  
D. Paul
Keyword(s):  
Quality By Design ◽  
Pharmaceutical Formulations ◽  
Active Pharmaceutical Ingredient ◽  
Hplc Method ◽  
Array Detector ◽  
Simultaneous Estimation ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Full Factorial

The present study describes the separation and simultaneous estimation of eight anti-retroviral drugs, namely, Telaprevir (TPV), Emtricitabine (ECB), Fosamprenavir (FANV), Tenofavir (TNF), Ritonavir (RNV), Raltegravir (RGV) and Oseltamivir (OSMV) and Zidovudine (ZDV) as an active pharmaceutical ingredient, by RP-HPLC method by applying the principles of Quality by Design (QbD). An application of DoE (Design of Experiments) full factorial design was used for initial screening and optimization. The final optimized method consists of separation being carried out on a Fortis C18 column (150 mm × 4.6 mm, 5μ particle size) using acetonitrile and 10 mm ammonium formate buffer (pH 3 adjusted with formic acid) using a gradient program. The quantitative evaluation was performed with a diode array detector at 251 nm and 230 nm with a flow rate of 1 mL min–1. Suitability of this method for the quantitative determination of the drugs was proved by validation in accordance with the International Conference on Harmonization (ICH) guidelines. The method is selective, precise, robust and accurate and can be used for routine analysis of pharmaceutical formulations in quality control and counterfeit screening.

DEVELOPMENT AND VALIDATION OF STABILITY INDICATING RP-HPLC METHOD FOR THE SIMULTANEOUS DETERMINATION OF BERBERINE AND CURCUMIN IN AN AYURVEDIC FORMULATION

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (08) ◽  
pp. 48-52
Author(s):  
K. P Parekh ◽  
◽  
A. P. Jadhav
Keyword(s):  
Mobile Phase ◽  
Herbal Medicines ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Quality And Safety ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Water Ph ◽  
Development And Validation

A simple, accurate, precise, robust stability indicating RP-HPLC method was developed and validated for simultaneous estimation of berberine and curcumin in an ayurvedic formulation. The two markers were resolved using a C-18 column using as the mobile phase methanol: water (pH 3 adjusted using acetic acid) in the ratio 75:25 V/V at a flow rate of 1mL/min. Retention times of berberine and curcumin were 2.58 ± 0.2 min and 8.5 ± 0.2 min, respectively at 358 nm. Linear response was observed in the concentration range of 2 – 8 ppm for berberine and 5 – 40 ppm for curcumin, with correlation coefficient (r2) of 0.994 and 0.998 for berberine and curcumin, respectively. The developed method was applied for quantitation of markers in marketed and in-house formulations of Gruhadhoomadi Churna. This method can also be used to evaluate formulations containing berberine and curcumin as markers, thus conforming to the need of ensuring quality and safety of herbal medicines.

scholarly journals APPLICATION OF VALIDATED RP-HPLC METHOD FOR THE DETERMINATION OF ARMODAFINIL IN BULK AND FORMULATION

2017 ◽  
pp. 158-161
Author(s):  
Devi Ramesh ◽  
Mohammad Habibuddin
Keyword(s):  
Retention Time ◽  
Mobile Phase ◽  
Hplc Method ◽  
Reverse Phase Hplc ◽  
Reverse Phase ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Validation Parameters ◽  
Isocratic Mode

Objective: The objective of the present study is to develop and validate a simple, rapid, sensitive reverse phase HPLC method for the determination of Armodafinil present in bulk and its pharmaceutical formulations.Methods: The chromatographic separation was achieved by using Hypersil ODS C-18 (150 x 4.6 mm, 5µ) in an isocratic mode with mobile phase methanol: phosphate buffer 3.0 (60:40 %v/v) was used. The flow rate was 1 ml/min and effluent was monitored at 225 nm. The method was validated for validation parameters i.e. linearity, accuracy, precision and robustness according to ICH guidelines.Results: The retention time of Armodafinil was 4.2 min and the linearity range of the method was 500-20000ng/ml with regression (r2) coefficient 0.9998. The method was validated for precision, accuracy, robustness and which were found to be within the acceptable limits according to the ICH guidelines. Also, the method was successfully applied for the estimation of Armodafinil in the marketed formulation of Nuvigil and the recovery was found to be>98%.Conclusion: The developed method possess good selectivity, specificity, there is no interference found in the blank at a retention time of ARM and good correlation between the peak area and concentration of the drugs under prescribed conditions. Hence, the method can be applied for routine analysis of Armodafinil. 

scholarly journals Validation of an HPLC method for the simultaneous determination of eletriptan and UK 120.413

2006 ◽  
Vol 71 (11) ◽  
pp. 1195-1205 ◽  
Author(s):  
Mira Zecevic ◽  
Biljana Jocic ◽  
Snezana Agatonovic-Kustrin ◽  
Ljiljana Zivanovic
Keyword(s):  
Mobile Phase ◽  
Analytical Procedure ◽  
Internal Standard ◽  
Correlation Coefficients ◽  
Hplc Method ◽  
Control Analysis ◽  
Internal Standard Method ◽  
Rp Hplc ◽  
Good Repeatability

Arapid and sensitive RPHPLCmethod was developed for the routine control analysis of eletriptan hydrobromide and its organic impurity UK 120.413 in Relpax? tablets. The chromatography was performed at 20?C using a C18 XTerra ? (5 ?m, 150 x 4,6 mm) column at a flow rate 1.0 ml/min. The drug and its impurity were detected at 225 nm. The mobile phase consisted of TEA (1 %) - methanol (67.2:32.8 v/v), the pH of which was adjusted to 6.8 with 85 % orthophosphoric acid. Quantification was accomplished by the internal standard method. The developed RP HPLC method was validated by testing: accuracy, precision, repeatability, specificity, detection limit, quantification limit, linearity, robustness and sensitivity. High linearity of the analytical procedure was confirmed over the concentration range of 0.05 - 1.00 mg/ml for eletriptan hydrobromide and from 0.10 - 1.50 ?g/ml for UK 120.413, with correlation coefficients greater than r = 0.995. The low value of the RSD expressed the good repeatability and precision of the method. Experimental design and a response surface method were used to test robustness of the analytical procedure and to evaluate the effect of variation of the method parameters, namely the mobile phase composition, pH and temperature. They showed small deviations from the method setting. The good recovery and low RSD confirm the suitability of the proposed RP HPLC method for the routine determination of eletriptan hydrobromide and its impurity UK 120.413 in Relpax? tables.

scholarly journals RP-HPLC METHOD FOR THE ESTIMATION OF ZILEUTON IN TABLET FORMULATION

2021 ◽  
Vol 9 (1) ◽  
pp. 141-149
Author(s):  
Romana Mahivish ◽  
Manjunath SY ◽  
Hemant Kumar
Keyword(s):  
Chromatographic Analysis ◽  
Mobile Phase ◽  
Hplc Method ◽  
Tablet Formulation ◽  
Solution Stability ◽  
Uv Detector ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
System Controller

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of zileuton in table dosage form. Chromatographic analysis of the drug was achieved on Cyberlab HPLC comprising of LC- 100P pump, a variable wavelength programmable LC-UV100 UV detector and SCL system controller.  Flowrosil C18 column (250 mm x 4.6 mm, 5 μ) as stationary phase with mobile phase consisting of Methanol: Acetonitrile: 1% GAA in the ratio of 70:10:20 v/v. The method showed a good linear response in the concentration range of 5-30 μg/ml with correlation coefficient of 0.9993. The flow rate was maintained at 1.0 ml/min and detection was carried out at 230 nm. The retention time was 3.12 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, solution stability, selectivity and sensitivity. The results obtained in the study were within the limits of ICH guidelines and hence this method can be used for the determination of zileuton in tablet formulation.

scholarly journals A Validated RP-HPLC Method for Simultaneous Estimation of Ciprofloxacin and Flucionolone in Pharmaceutical Formulation

2018 ◽  
Vol 6 (03) ◽  
pp. 48-51
Author(s):  
D. Mamatha ◽  
G. Naveen ◽  
Devi Singh
Keyword(s):  
Theoretical Plate ◽  
Hplc Method ◽  
Pharmaceutical Formulation ◽  
Assay Method ◽  
Plate Count ◽  
Simultaneous Estimation ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Validation Parameters

A simple, accurate, precise and sensitive RP-HPLC assay method have been validated for the simultaneous estimation of ciprofloxacin and flucionolone in pharmaceutical formulation by RP-HPLC .ciprofloxacin and flucionolone is separated using Develosil ODS HG-5 RP C18, 5μm, 15cmx4.6mm i.d. column at a flow rate of 0.8 ml/ min. Here resolution was good, theoretical plate count and symmetry was appropriate .The LOD and LOQ were calculated using statistical methods. The % RSD values were less than 1.The validation parameters, tested in accordance with the requirements of ICH guidelines, prove the suitability of this method. The method was successfully applied for determination of drug in tablets, wherein no interference from tablet excipients was observed, indicating the specificity of the developed method.The proposed method was found to be simple, precise, accurate, rapid, economic and reproducible for the estimation of ciprofloxacin and flucionolone in pharmaceutical formulation.

Sign in / Sign up

Export Citation Format

Share Document