Color stability of the resin cements with accelerated aging

2008 ◽  
Vol 33 (4) ◽  
pp. 389 ◽  
Author(s):  
Ha-Jeung Song ◽  
Su-Jung Park ◽  
Yun-Chan Hwang ◽  
Won-Mann Oh ◽  
In-Nam Hwang
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements

scholarly journals Influence of Different Types of Resin Luting Agents on Color Stability of Ceramic Laminate Veneers Subjected to Accelerated Artificial Aging

2016 ◽  
Vol 27 (1) ◽  
pp. 95-100 ◽  
Author(s):  
Francisca Daniele Jardilino Silami ◽  
Rafaella Tonani ◽  
Carla Cecilia Alandia-Román ◽  
Fernanda de Carvalho Panzeri Pires-de-Souza
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements ◽  
Healthy Human ◽  
Color Changes ◽  
Luting Agents ◽  
Occlusal Surfaces ◽  
Initial Color ◽  
Laminate Veneers ◽  
Adhesive Cement

Abstract The aim of this study was to evaluate the influence of accelerated aging (AAA) on the color stability of resin cements for bonding ceramic laminate veneers of different thicknesses. The occlusal surfaces of 80 healthy human molars were flattened. Ceramic laminate veneers (IPS e-max Ceram) of two thicknesses (0.5 and 1.0 mm) were bonded with three types of luting agents: light-cured, conventional dual and self-adhesive dual cement. Teeth without restorations and cement samples (0.5 mm) were used as control. After initial color evaluations, the samples were subjected to AAA for 580 h. After this, new color readouts were made, and the color stability (ΔE) and luminosity (ΔL) data were analyzed. The greatest color changes (p<0.05) occurred when 0.5 mm veneers were fixed with light-cured cement and the lowest when 1.0 mm veneers were fixed with conventional dual cement. There was no influence of the restoration thickness when the self-adhesive dual cement was used. When veneers were compared with the control groups, it was verified that the cement samples presented the greatest alterations (p<0.05) in comparison with both substrates and restored teeth. Therefore, it was concluded that the thickness of the restoration influences color and luminosity changes for conventional dual and light-cured cements. The changes in self-adhesive cement do not depend on restoration thickness.

Effect of accelerated aging on color stability and nanoleakage of resin cements

2013 ◽  
Vol 29 ◽  
pp. e53
Author(s):  
L.T. Prieto ◽  
D.C.R.S. Oliveira ◽  
C.T.P. Araujo ◽  
E.K. Coppini ◽  
C.T.S. Dias ◽  
...  
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements

scholarly journals Effect of Accelerated Aging on the Color Stability of Dual-Cured Self-Adhesive Resin Cements

2015 ◽  
Vol 8 (2) ◽  
pp. 49-56
Author(s):  
Ah-Rang Kim ◽  
Yong-Chan Jeon ◽  
Chang-Mo Jeong ◽  
Mi-Jung Yun ◽  
Jung-Bo Huh
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements ◽  
Adhesive Resin

Color Stability of Resin Cements Exposed to Aging

2019 ◽  
Vol 44 (6) ◽  
pp. 609-614 ◽  
Author(s):  
NC Ramos ◽  
JN Luz ◽  
MC Valera ◽  
RM Melo ◽  
GSFA Saavedra ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Artificial Aging ◽  
Resin Composite ◽  
Accelerated Aging ◽  
Color Stability ◽  
Distilled Water ◽  
Base Catalyst ◽  
Resin Cements ◽  
Tukey Test ◽  
Before And After

SUMMARY The aim of this study was to evaluate the color stability of light-cured and dual-cured resin cements after artificial accelerated aging. Ten specimens (6-mm diameter and 2-mm thickness) for each of five resin cements were prepared: GC (dual-cured cement, GCem), Vb (light-cured cement, Variolink II only the base), Vbc (dual-cured cement, Variolink II base with catalyst), VV (light-cured cement, Variolink Veneer), and FR (flowable resin composite, light cured). The samples were polished and stored in an accelerated artificial aging machine for 308 hours (160 klx), with cycles of 120 minutes under light and 60 minutes in the dark. All aging was carried out in distilled water at 37°C and light irradiation at 765 W/m2. The samples were evaluated in a spectrophotometer before and after aging, and results were calculated according to CIEDE2000. The data were statistically analyzed (one-way analysis of variance and Tukey test, 95% confidence). The results of ΔE00 were statistically significant for the type of cement (p&lt;0.001), with differences among tested groups. Variolink II (base only and base + catalyst) and the flowable resin were the cements with the lowest color variations after the artificial accelerated aging. Considering the values ΔE00 of acceptability and perceptibility, none of the tested cements showed acceptable values.

Assessment of Color Stability of Treated Leathers with Silicone Oil and Polyethylene Glycol

2014 ◽  
Vol 1 (1) ◽  
pp. 24-34
Author(s):  
Alireza K. ◽  
Hossein Ahmadi ◽  
Mohsen Mohammadi
Keyword(s):  
Ascorbic Acid ◽  
Polyethylene Glycol ◽  
Treatment Process ◽  
Color Change ◽  
Silicone Oil ◽  
Accelerated Aging ◽  
Color Stability ◽  
Antioxidant Additive ◽  
Before And After ◽  
Aesthetic Values

Lubricants and leather dressings are the most common treatments of dry and water logged historical leathers. Color change has a great importance during the time and treatment process, due to visual and aesthetic values of historic leather relics. Polyethylene glycol (PEG) and silicone oil (SiO) are frequently used leather dressings in the conservation procedures. Therefore, color stability of treated leathers with PEG and SiO were investigated before and after heat accelerated aging. Moreover, application of ascorbic acid was evaluated as an antioxidant additive for PEG (PEG+AA).Color change after treatment and aging were studied by colorimetry technique in the CIE *L*a*b system. Results indicated to severe color alteration in PEG treated and aged leathers with or without ascorbic acid. Whereas, SiO treated samples showed better stability and minimum color shift after aging. Silicone oil was characterized as the best dressing for historical leathers with compared to PEG and PEG+AA, due to its high stability and aesthetical properties.

scholarly journals Color Stability of a Pigmented Elastomer for Maxillofacial Appliances

1979 ◽  
Vol 58 (5) ◽  
pp. 1450-1454 ◽  
Author(s):  
Andrew Koran ◽  
Robert Yu ◽  
John M. Powers ◽  
Robert G. Craig
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Clinical Use ◽  
Reflection Spectrophotometry ◽  
Excellent Color

The color stability of a series of eleven maxillofacial pigments was determined after accelerated aging using reflection spectrophotometry. The results indicate that seven of the pigments demonstrated good to excellent color stability, while four of the pigments were less promising for clinical use.

Evaluation of Color Changes of Different Resin Cements in Feldspathic Ceramic Crowns After Accelerated Aging: An In Vitro Research

2021 ◽  
pp. 232020682110443
Author(s):  
Murat Eskitaşçıoğlu ◽  
Mehmet Şerif Akdeniz ◽  
Beyza Ünalan Değirmenci
Keyword(s):  
Color Change ◽  
Accelerated Aging ◽  
B Value ◽  
Resin Cements ◽  
Color Changes ◽  
A Value ◽  
L Value ◽  
Ceramic Crowns ◽  
The Times

Aims: To evaluate the color changes that occur after accelerated aging in feldspathic ceramic crowns cemented with three different dual-cured resin cements. Materials and Methods: For each of the A2-colored RelyX U200, G-CEM LinkForce, and Panavia V5 cement groups, 45 dies from A2-colored zirconia blocks and 45 crowns from CEREC blocks were prepared. Color measurements after 24 h of cementation (T1) and after cycles of aging of 1750 (T2), 3500 (T3), and 7000 (T4) in the thermal cycle device were made using SpectroShade Micro device. The coordinates of the color were used L*, a*, and b* as base and the color change was calculated with ∆ E00 in determining the color. One-way analysis of variance test was used to compare the times in terms of ∆ L*, ∆ a*, and ∆ b* values. Results: It was found that ∆ L* value decreased significantly in period of the T2, T3, and T4 times compared to T1 in all groups ( P < .05), whereas the change between period of T2, T3, and T4 times was not significant ( P > .05). The ∆ a* value increased significantly in the period of T3 and T4 times compared to T1 in the only G-CEM LinkForce group, whereas the ∆ b* value increased significantly in the period of T4 time compared to T1 in the only Panavia V5 group. The changes in ∆ E00 values, which were observed in all period of times, were found to be between 0.43 and 1.04, 0.43 and 1.43, and 0.40 and 0.97 in RelyX U200, G-CEM LinkForce, and Panavia V5 groups, respectively. Conclusion: After accelerated aging, it was found that the color of all cements became darker and the G-CEM LinkForce group turned red and the Panavia V5 group turned yellow. However, it was found that the color changes that occurred were within clinically acceptable visible levels.

scholarly journals Color and opacity of composites protected with surface sealants and submitted to artificial accelerated aging

2012 ◽  
Vol 06 (01) ◽  
pp. 024-033 ◽  
Author(s):  
Fabiano Gamero Aguilar ◽  
Lucas da Fonseca Roberti Garcia ◽  
Diogo Rodrigues Cruvinel ◽  
Ana Beatriz Silva Sousa ◽  
Fernanda de Carvalho Panzeri Pires-de-Souza
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Scanning Electronic Microscopy ◽  
Electronic Microscopy ◽  
Surface Protection ◽  
Before And After ◽  
Color Similarity ◽  
Surface Irregularities ◽  
Surface Sealants ◽  
Color Alteration

ABSTRACTObjectives: To evaluate the color similarity, stability and opacity of composites (TPH, Charisma, and Concept, shade A2) protected with surface sealants (Fortify Plus and Biscover) and cyanoacrylate (Super Bonder).Methods: Forty specimens of each composite were made and separated into 4 groups (n=10) according to the surface protection: GI - without sealant; GII - cyanoacrylate; GIII - Fortify Plus; GIV - Biscover. Color and opacity readings were taken before and after Artificial Acelerated Aging (AAA) and the values obtained for color stability were submitted to statistical analysis by 2-way ANOVA and Bonferroni’s test (P<.05). The values acquired for color similarity were submitted to 1-way ANOVA and Tukey’s test (P<.05). The specimen sufaces were compared before and after AAA using Scanning Electronic Microscopy (SEM).Results: Studied composites did not present the same values for the coordinates L*, a* and b * before AAA, indicating that there was no color similarity among them. All composites presented color alteration after AAA with clinically unacceptable values. Protected groups presented lower opacity variation after AAA, in comparison with the control goup. SEM evaluation demonstrated that AAA increased the surface irregularities in all of the studied groups.Conclusion: Surface sealants were not effective in maintaining composite color, but were able to maintain opacity. (Eur J Dent 2012;6:24-33)

Sign in / Sign up

Export Citation Format

Share Document