scholarly journals Influence of Different Types of Resin Luting Agents on Color Stability of Ceramic Laminate Veneers Subjected to Accelerated Artificial Aging

2016 ◽  
Vol 27 (1) ◽  
pp. 95-100 ◽  
Author(s):  
Francisca Daniele Jardilino Silami ◽  
Rafaella Tonani ◽  
Carla Cecilia Alandia-Román ◽  
Fernanda de Carvalho Panzeri Pires-de-Souza
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements ◽  
Healthy Human ◽  
Color Changes ◽  
Luting Agents ◽  
Occlusal Surfaces ◽  
Initial Color ◽  
Laminate Veneers ◽  
Adhesive Cement

Abstract The aim of this study was to evaluate the influence of accelerated aging (AAA) on the color stability of resin cements for bonding ceramic laminate veneers of different thicknesses. The occlusal surfaces of 80 healthy human molars were flattened. Ceramic laminate veneers (IPS e-max Ceram) of two thicknesses (0.5 and 1.0 mm) were bonded with three types of luting agents: light-cured, conventional dual and self-adhesive dual cement. Teeth without restorations and cement samples (0.5 mm) were used as control. After initial color evaluations, the samples were subjected to AAA for 580 h. After this, new color readouts were made, and the color stability (ΔE) and luminosity (ΔL) data were analyzed. The greatest color changes (p<0.05) occurred when 0.5 mm veneers were fixed with light-cured cement and the lowest when 1.0 mm veneers were fixed with conventional dual cement. There was no influence of the restoration thickness when the self-adhesive dual cement was used. When veneers were compared with the control groups, it was verified that the cement samples presented the greatest alterations (p<0.05) in comparison with both substrates and restored teeth. Therefore, it was concluded that the thickness of the restoration influences color and luminosity changes for conventional dual and light-cured cements. The changes in self-adhesive cement do not depend on restoration thickness.

scholarly journals Influence of Resin Cements and Ceramic types on the Color Stability and Translucence of Laminate Veneers/ Influência dos Cimentos de Resina e Tipos Cerâmicos na Estabilidade da Cor e Translucidez das Facetas Laminadas

2021 ◽  
Vol 4 (5) ◽  
pp. 21410-21425
Author(s):  
Francisca Daniele Jardilino Silami ◽  
Cristian Sbardelotto ◽  
Rafaella Tonani- Torrieri ◽  
Rossana Pereira de Almeida ◽  
Carolina Noronha Ferraz de Arruda ◽  
...  
Keyword(s):  
Color Change ◽  
Color Stability ◽  
The Other ◽  
Resin Cements ◽  
Mechanical Cycling ◽  
Study Results ◽  
Significant Difference ◽  
Initial Color ◽  
Laminate Veneers

Objective: This study evaluated the color stability and translucence of resin cements in the fixation of ceramic veneers submitted to aging protocols. Material and Methods: Buccal faces of bovine incisors were planed up to dentin. Eighty ceramic veneers (1 mm) were prepared using two pressed ceramics (IPS e-maxPress and IPS e-maxZirpress, IvoclarVivadent). Before the initial color and translucence readouts (Vita EasyShade, VITA), the veneers were fixed with light (Variolink II, Ivoclar/Vivadent) or dual cured (Relyx U200, 3M ESPE) cements. The samples were submitted (n=10) to thermal mechanical cycling (1.200.000 cycles, 1,3Hz, 5°C/37°C/55°C); and no aging protocol (control). New color and translucence readouts were performed. The cement thickness was quantified by a double coordinate stereomicroscope (Nikon Measurescope) as a control of the study. Results: Data (3-way ANOVA, Tukey, p0,05) showed difference (p0.05) in the color change for both ceramics cemented with U200 with no aging protocol. In the other groups, there was no significant difference (p0.05). There was no difference for translucence regardless ceramics, cements, or aging protocol. Thermal mechanical cycling was not significant for optical changes of the ceramics tested. Conclusions: It was concluded that the color stability and translucence of ceramics with thickness of 1mm were not influenced by the cement when submitted to thermal mechanical cycling. 

Color stability of the resin cements with accelerated aging

2008 ◽  
Vol 33 (4) ◽  
pp. 389 ◽  
Author(s):  
Ha-Jeung Song ◽  
Su-Jung Park ◽  
Yun-Chan Hwang ◽  
Won-Mann Oh ◽  
In-Nam Hwang
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements

Evaluation of Color Changes of Different Resin Cements in Feldspathic Ceramic Crowns After Accelerated Aging: An In Vitro Research

2021 ◽  
pp. 232020682110443
Author(s):  
Murat Eskitaşçıoğlu ◽  
Mehmet Şerif Akdeniz ◽  
Beyza Ünalan Değirmenci
Keyword(s):  
Color Change ◽  
Accelerated Aging ◽  
B Value ◽  
Resin Cements ◽  
Color Changes ◽  
A Value ◽  
L Value ◽  
Ceramic Crowns ◽  
The Times

Aims: To evaluate the color changes that occur after accelerated aging in feldspathic ceramic crowns cemented with three different dual-cured resin cements. Materials and Methods: For each of the A2-colored RelyX U200, G-CEM LinkForce, and Panavia V5 cement groups, 45 dies from A2-colored zirconia blocks and 45 crowns from CEREC blocks were prepared. Color measurements after 24 h of cementation (T1) and after cycles of aging of 1750 (T2), 3500 (T3), and 7000 (T4) in the thermal cycle device were made using SpectroShade Micro device. The coordinates of the color were used L*, a*, and b* as base and the color change was calculated with ∆ E00 in determining the color. One-way analysis of variance test was used to compare the times in terms of ∆ L*, ∆ a*, and ∆ b* values. Results: It was found that ∆ L* value decreased significantly in period of the T2, T3, and T4 times compared to T1 in all groups ( P < .05), whereas the change between period of T2, T3, and T4 times was not significant ( P > .05). The ∆ a* value increased significantly in the period of T3 and T4 times compared to T1 in the only G-CEM LinkForce group, whereas the ∆ b* value increased significantly in the period of T4 time compared to T1 in the only Panavia V5 group. The changes in ∆ E00 values, which were observed in all period of times, were found to be between 0.43 and 1.04, 0.43 and 1.43, and 0.40 and 0.97 in RelyX U200, G-CEM LinkForce, and Panavia V5 groups, respectively. Conclusion: After accelerated aging, it was found that the color of all cements became darker and the G-CEM LinkForce group turned red and the Panavia V5 group turned yellow. However, it was found that the color changes that occurred were within clinically acceptable visible levels.

scholarly journals Color stability and degree of conversion of a novel dibenzoyl germanium derivative containing photo-polymerized resin luting cement

2020 ◽  
Vol 18 ◽  
pp. 228080002091732 ◽  
Author(s):  
Fahad Alkhudhairy ◽  
Fahim Vohra ◽  
Mustafa Naseem ◽  
Mosa Mohammed Owais ◽  
Abdulmajeed H Bin Amer ◽  
...  
Keyword(s):  
Color Stability ◽  
Color Difference ◽  
Degree Of Conversion ◽  
Resin Cement ◽  
Resin Cements ◽  
Luting Agents ◽  
Multiple Comparison Test ◽  
Luting Cement ◽  
Color Components

Aim: To compare the color stability and degree of conversion (DC) of a resin cement containing a dibenzoyl germanium derivative photo-initiator (Variolink Esthetic) to resin cements containing conventional luting agents. Materials and Method: Spectrophotometry and Fourier transform infrared spectroscopy (FTIR) were used to compare the color stability and DC, respectively, of Variolink Esthetic compared to Calibra, Variolink-N, and NX3 resin cements. Ten specimens (1 × 2 mm2) of each resin cement were photo-polymerized and then subjected to color stability assessments. In addition, 30 samples of each of the four resin cements were prepared and then immersed in three staining solutions (tea, coffee, and distilled water) for two weeks. Changes in color for the immersed versus non-immersed specimens (control specimens) were determined by comparing ΔL (lightness), Δa, and Δb (color components), and an overall ΔE (color difference) obtained from spectrophotometry assays. One-way analysis of variance and a multiple comparison test (Tukey’s test) were used to analyze color stability and DC data. NX3 and Variolink Esthetic resin cements exhibited significantly lower values compared to the dual cured resin cements (Variolink-N and Calibra). Results: The highest DC values were observed among the photo-polymerized samples of Variolink Esthetic (87.18 ± 2.90%), while the lowest DC values were observed among the Variolink-N samples (44.55 ± 4.33%). Conclusion: The resin cement, Variolink Esthetic, containing a novel dibenzoyl germanium derivative photo-initiator exhibited superior color stability ( p < 0.05) and a higher DC than other resin cements containing conventional luting agents in an in vitro setting.

Effect of accelerated aging on color stability and nanoleakage of resin cements

2013 ◽  
Vol 29 ◽  
pp. e53
Author(s):  
L.T. Prieto ◽  
D.C.R.S. Oliveira ◽  
C.T.P. Araujo ◽  
E.K. Coppini ◽  
C.T.S. Dias ◽  
...  
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements

scholarly journals Effect of Accelerated Aging on the Color Stability of Dual-Cured Self-Adhesive Resin Cements

2015 ◽  
Vol 8 (2) ◽  
pp. 49-56
Author(s):  
Ah-Rang Kim ◽  
Yong-Chan Jeon ◽  
Chang-Mo Jeong ◽  
Mi-Jung Yun ◽  
Jung-Bo Huh
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements ◽  
Adhesive Resin

scholarly journals Discoloration and force degradation of orthodontic elastomeric ligatures

2017 ◽  
Vol 22 (2) ◽  
pp. 45-54 ◽  
Author(s):  
Samaneh Nakhaei ◽  
Raha Habib Agahi ◽  
Amin Aminian ◽  
Masoud Rezaeizadeh
Keyword(s):  
Testing Machine ◽  
Color Stability ◽  
Opinion Poll ◽  
Color Changes ◽  
Force Decay ◽  
Average Residual ◽  
Cad Cam ◽  
Residual Force ◽  
Initial Color

ABSTRACT OBJECTIVE: The aim of the present study was to evaluate color changes and force degradation of orthodontic elastomeric ligatures in different stretching patterns during a 8-weeks period. METHODS: Two elastomers with the minimum and two with the maximum color changing, and gray elastomers of two brands (American Orthodontics and Ortho Technology) were selected according to an opinion poll with clinicians and color changes after 4 weeks of intraoral use were evaluated. These elastomers were mounted on special jigs fabricated using a CAD-CAM technique, underwent different stretching patterns and the force was measured in 0, 24 hours, 2, 4 and 8 weeks. During in vivo part of the study, force levels of elastomers were measured after 4 weeks on a material testing machine. Data were analyzed with four-way ANOVA and Tukey post hoc tests. RESULTS: All the elastomers showed color changing but the degree of color stability was significantly different. The mean force degradation was higher in 1-mm stretch groups. After 8 weeks, the average residual force of elastomers was 1.45 ± 0.18 N and the maximum force decay was seen in the elastomers that exhibited the maximum initial force. CONCLUSION: There is significant relationship between the stretching pattern and the amount of residual force of elastomers. Elastomers with higher initial forces exhibited higher percentages of force loss after 8 weeks. It seems that there is a relationship between initial color and color changing of elastomers.

scholarly journals Color Stability of Ceramic Veneers Luted With Resin Cements and Pre-Heated Composites: 12 Months Follow-Up

2020 ◽  
Vol 31 (1) ◽  
pp. 69-77 ◽  
Author(s):  
Brenda Procopiak Gugelmin ◽  
Luiz Carlos Machado Miguel ◽  
Flares Baratto Filho ◽  
Leonardo Fernandes da Cunha ◽  
Gisele Maria Correr ◽  
...  
Keyword(s):  
Color Stability ◽  
Composite Resins ◽  
Lithium Silicate ◽  
Distilled Water ◽  
Resin Cements ◽  
Luting Agents ◽  
Double Interaction ◽  
Bovine Enamel ◽  
Acceptability Threshold

Abstract The objective was to evaluate the color stability of ceramic veneers luted with resin cements and pre-heated composite resins (60oC) for 12 months, and determine the degree of conversion (DC) of the luting agents. Two resin cements (AllCem Veneer, light-cured (LRC) and AllCem, dual-cured (DRC)] and three composite resins [Z100 (MNCR-minifilled), Herculite Classic (MHCR-micro-hybrid) and Durafill (MCCR-microfilled)] were used for cementing 0.8-mm-thick lithium-silicate glass-ceramic laminates (Suprinity, shade B2-HT, Vita) on bovine enamel (n=10). The specimens were stored at 37oC in distilled water. CIELab parameters were determined at 24h after luting (baseline), 7, 30, 90, 180 days and 12 months. Three specimens were prepared for DC evaluation, performed by micro-Raman spectroscopy. Data were analyzed by ANOVA and Tukey’s test (a=5%). For ΔEab and ΔE00, there were significant differences for luting material (p<0.001), time (p<0.001), and double interaction (p<0.001). The groups cemented with MHCR (1 year), MCCR (90 days and 1 year) and MCCR-PH (1 year) were the ones with ΔE values greater than the acceptability threshold. All other groups maintained their ΔE lower than the acceptability threshold after 1 year in distilled water. Regarding DC, there were no significant differences (p=0.127) among the materials. Non-significant negative correlations were observed between the mean ΔEab and DC (R=-0.65) and ΔE00 and DC (R=-0.64). A significant positive correlation was observed mean ΔEab and ΔE00 (R=0.99). It was concluded that the different luting agents influenced the final color of the restorations. The heating of the composite resins did not affect their DC.

Sign in / Sign up

Export Citation Format

Share Document