scholarly journals Quantitative Visualization of Supersonic Jet Flows

2017 ◽  
Vol 15 (1) ◽  
pp. 53-63
Author(s):  
Jae Hyeok Lee ◽  
Guang Zhang ◽  
Heuy Dong Kim
Akustika ◽  
2019 ◽  
Vol 32 ◽  
pp. 144-150
Author(s):  
Vladislav Emelyanov ◽  
Aleksey Tsvetkov ◽  
Konstantin Volkov

Interest in the development of models and methods focused on the mechanisms of noise generation in jet flows is due to strict noise requirements produced by various industrial devices, as well as the possibilities of using sound in engineering and technological processes. The tools of physical and computational modeling of gas dynamics and aero-acoustics problems are considered, and noise sources and mechanisms of noise generation in supersonic jet flows are discussed. The physical pattern of the flow in free supersonic under-expanded jets is discussed on the basis of experimental and numerical data, as well as the flow structure arising from the interaction of a supersonic under-expanded jet with a cylindrical cavity. The influence of the nozzle pressure ratio and cavity depth on the sound pressure level, amplitude and frequency characteristics of the flow parameters is studied.


Author(s):  
Carlos Junqueira-Junior ◽  
Sami Yamouni ◽  
Joao Luiz F. Azevedo ◽  
William Wolf

2004 ◽  
Vol 126 (5) ◽  
pp. 844-850 ◽  
Author(s):  
Khaled S. Abdol-Hamid ◽  
S. Paul Pao ◽  
Steven J. Massey ◽  
Alaa Elmiligui

It is well known that the two-equation turbulence models under-predict mixing in the shear layer for high temperature jet flows. These turbulence models were developed and calibrated for room temperature, low Mach number, and plane mixing layer flows. In the present study, four existing modifications to the two-equation turbulence model are implemented in PAB3D and their effect is assessed for high temperature jet flows. In addition, a new temperature gradient correction to the eddy viscosity term is tested and calibrated. The new model was found to be in the best agreement with experimental data for subsonic and supersonic jet flows at both low and high temperatures.


AIAA Journal ◽  
1971 ◽  
Vol 9 (12) ◽  
pp. 2346-2353 ◽  
Author(s):  
DARSHAN S. DOSANJH ◽  
JAMES C. YU ◽  
AMR N. ABDELHAILIID
Keyword(s):  

AIAA Journal ◽  
1973 ◽  
Vol 11 (2) ◽  
pp. 254-255 ◽  
Author(s):  
ARTHUR G. KURN
Keyword(s):  

Author(s):  
Carlos Junqueira-Junior ◽  
Sami Yamouni ◽  
Joao Luiz F. Azevedo ◽  
William Wolf

Author(s):  
K. Kailasanath ◽  
Junhui Liu ◽  
Ephraim Gutmark ◽  
David Munday ◽  
Steven Martens

In this paper, we present observations on the impact of mechanical chevrons on modifying the flow field and noise emanated by supersonic jet flows. These observations are derived from both a monotonically integrated large-eddy simulation (MILES) approach to simulate the near fields of supersonic jet flows and laboratory experiments. The nozzle geometries used in this research are representative of practical engine nozzles. A finite-element flow solver using unstructured grids allows us to model the nozzle geometry accurately and the MILES approach directly computes the large-scale turbulent flow structures. The emphasis of the work is on “off-design” or non-ideally expanded flow conditions. LES for several total pressure ratios under non-ideally expanded flow conditions were simulated and compared to experimental data. The agreement between the predictions and the measurements on the flow field and near-field acoustics is good. After this initial step on validating the computational methodology, the impact of mechanical chevrons on modifying the flow field and hence the near-field acoustics is being investigated. This paper presents the results to date and further details will be presented at the meeting.


2012 ◽  
Vol 11 (7-8) ◽  
pp. 783-812 ◽  
Author(s):  
S.-C. Lo ◽  
K. M. Aikens ◽  
G. A. Blaisdell ◽  
A. S. Lyrintzis

Sign in / Sign up

Export Citation Format

Share Document