Impact of Mechanical Chevrons on Supersonic Jet Flow and Noise

2009 ◽  
Author(s):  
K. Kailasanath ◽  
Junhui Liu ◽  
Ephraim Gutmark ◽  
David Munday ◽  
Steven Martens
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Near Field ◽  
Supersonic Jet ◽  
Initial Step ◽  
Nozzle Geometry ◽  
Jet Flows ◽  
Flow Conditions ◽  
Nozzle Geometries ◽  
The Impact

In this paper, we present observations on the impact of mechanical chevrons on modifying the flow field and noise emanated by supersonic jet flows. These observations are derived from both a monotonically integrated large-eddy simulation (MILES) approach to simulate the near fields of supersonic jet flows and laboratory experiments. The nozzle geometries used in this research are representative of practical engine nozzles. A finite-element flow solver using unstructured grids allows us to model the nozzle geometry accurately and the MILES approach directly computes the large-scale turbulent flow structures. The emphasis of the work is on “off-design” or non-ideally expanded flow conditions. LES for several total pressure ratios under non-ideally expanded flow conditions were simulated and compared to experimental data. The agreement between the predictions and the measurements on the flow field and near-field acoustics is good. After this initial step on validating the computational methodology, the impact of mechanical chevrons on modifying the flow field and hence the near-field acoustics is being investigated. This paper presents the results to date and further details will be presented at the meeting.

Supersonic Jet Noise Reduction Technologies for Gas Turbine Engines

2011 ◽  
Vol 133 (10) ◽  
Author(s):  
David Munday ◽  
Nick Heeb ◽  
Ephraim Gutmark ◽  
Junhui Liu ◽  
K. Kailasanath
Keyword(s):  
Flow Field ◽  
Near Field ◽  
Supersonic Jet ◽  
Acoustic Emissions ◽  
Nozzle Geometry ◽  
Axial Position ◽  
Eddy Simulation ◽  
Image Velocimetry ◽  
Large Eddy ◽  
The Impact

This paper presents observations and simulations of the impact of several technologies on modifying the flow-field and acoustic emissions from supersonic jets from nozzles typical of those used on military aircraft. The flow-field is measured experimentally by shadowgraph and particle image velocimetry. The acoustics are characterized by near- and far-field microphone measurements. The flow- and near-field pressures are simulated by a monotonically integrated large eddy simulation. Use of unstructured grids allows accurate modeling of the nozzle geometry. The emphasis of the work is on “off-design” or nonideally expanded flow conditions. The technologies applied to these nozzles include chevrons, fluidic injection, and fluidically enhanced chevrons. The fluidic injection geometry and the fluidic enhancement geometry follow the approach found successful for subsonic jets by employing jets pitched 60 deg into the flow, impinging on the shear layer just past the tips of the chevrons or in the same axial position when injection is without chevrons.

Supersonic Jet Noise Reduction Using Fluidics, Mechanical Chevrons and Fluidically Enhanced Chevrons

2010 ◽  
Author(s):  
David Munday ◽  
Nick Heeb ◽  
Ephraim Gutmark ◽  
Junhui Liu ◽  
K. Kailasanath
Keyword(s):  
Near Field ◽  
Supersonic Jet ◽  
Acoustic Emissions ◽  
Nozzle Geometry ◽  
Axial Position ◽  
Eddy Simulation ◽  
Image Velocimetry ◽  
Large Eddy ◽  
Nozzle Geometries ◽  
The Impact

This paper presents observations and simulations of the impact of several technologies on modifying the flow field and acoustic emissions from supersonic jets from nozzles typical of those used on military aircraft. The flowfield is measured experimentally by shadowgraph and particle image velocimetry (PIV). The acoustics are characterized by near and far-field microphone measurements. The flow and near-field pressures are simulated by monotonically integrated large-eddy simulation (MILES). Use of unstructured grids allows accurate modeling of the nozzle geometry. The nozzle geometries used in this research are representative of practical engine nozzles. The emphasis of the work is on “off-design” or non-ideally expanded flow conditions. The technologies applied to these nozzles include chevrons, fluidic injection and fluidically enhanced chevrons. The fluidic injection geometry and fluidic enhancement geometry follow the approach found successful for subsonic jets by Alkislar, Krothapalli & Butler [1] employing jets pitched 60° into the flow, impinging on the shear layer just past the tips of the chevrons, or in the same axial position when injection is without chevrons.

scholarly journals Coaxial Circular Jets—A Review

Fluids ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 147
Author(s):  
René van Hout ◽  
Sudharson Murugan ◽  
Abhijit Mitra ◽  
Beni Cukurel
Keyword(s):  
Flow Field ◽  
Near Field ◽  
Mixing Layer ◽  
Flow Characteristics ◽  
Fine Tuning ◽  
Nozzle Geometry ◽  
Jet Flows ◽  
Coaxial Jets ◽  
Static Pressure Distribution ◽  
Circular Jets

This review article focuses on the near-field flow characteristics of coaxial circular jets that, despite their common usage in combustion processes, are still not well understood. In particular, changes in outer to inner jet velocity ratios, ru, absolute jet exit velocities and the nozzle dimensions and geometry have a profound effect on the near-field flow that is characterized by shear as well as wake instabilities. This review starts by presenting the set of equations governing the flow field and, in particular, the importance of the Reynolds stress distributions on the static pressure distribution is emphasized. Next, the literature that has led to the current stage of knowledge on coaxial jet flows is presented. Based on this literature review, several regions in the near-field (based on ru) are identified in which the inner mixing layer is either governed by shear or wake instabilities. The latter become dominant when ru≈1. For coaxial jets issued into a quiescent surrounding, shear instabilities of the annular (outer) jet are always present and ultimately govern the flow field in the far-field. We briefly discuss the effect of nozzle geometry by comparing the flow field in studies that used a blockage disk to those that employed thick inner nozzle lip thickness. Similarities and differences are discussed. While impinging coaxial jets have not been investigated much, we argue in this review that the rich flow dynamics in the near-field of the coaxial jet might be put to an advantage in fine-tuning coaxial jets impinging onto surfaces for specific heat and mass transfer applications. Several open questions are discussed at the end of this review.

A proposed wavy shield for suppression of supersonic jet noise utilizing reflections

2021 ◽  
Vol 20 (1-2) ◽  
pp. 4-34
Author(s):  
Reda R Mankbadi ◽  
Saman Salehian
Keyword(s):  
Large Scale ◽  
Flat Surface ◽  
Near Field ◽  
Supersonic Jet ◽  
Jet Noise ◽  
Dominant Frequency ◽  
Wavy Surface ◽  
Initial Region ◽  
Reflected Waves ◽  
Free Jet

In this work we propose replacing the conventional flat-surface airframe that shields the engine by a wavy surface. The basic principle is to design a wavy pattern to reflect the incoming near-field flow and acoustic perturbations into waves of a particular dominant frequency. The reflected waves will then excite the corresponding frequency of the large-scale structure in the initial region of the jet’s shear layer. By designing the frequency of the reflected waves to be the harmonic of the fundamental frequency that corresponds to the radiated peak noise, the two frequency-modes interact nonlinearly. With the appropriate phase difference, the harmonic dampens the fundamental as it extracts energy from it to amplify. The outcome is a reduction in the peak noise. To evaluate this concept, we conducted Detached Eddy Simulations for a rectangular supersonic jet with and without the wavy shield and verified our numerical results with experimental data for a free jet, as well as, for a jet with an adjacent flat surface. Results show that the proposed wavy surface reduces the jet noise as compared to that of the corresponding flat surface by as much as 4 dB.

scholarly journals Instability wave models for the near-field fluctuations of turbulent jets

2011 ◽  
Vol 689 ◽  
pp. 97-128 ◽  
Author(s):  
K. Gudmundsson ◽  
Tim Colonius
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Microphone Array ◽  
Near Field ◽  
Turbulent Jets ◽  
Instability Wave ◽  
Mean Flow ◽  
Velocity Fluctuations ◽  
The Mean ◽  
Scale Structures

AbstractPrevious work has shown that aspects of the evolution of large-scale structures, particularly in forced and transitional mixing layers and jets, can be described by linear and nonlinear stability theories. However, questions persist as to the choice of the basic (steady) flow field to perturb, and the extent to which disturbances in natural (unforced), initially turbulent jets may be modelled with the theory. For unforced jets, identification is made difficult by the lack of a phase reference that would permit a portion of the signal associated with the instability wave to be isolated from other, uncorrelated fluctuations. In this paper, we investigate the extent to which pressure and velocity fluctuations in subsonic, turbulent round jets can be described aslinearperturbations to the mean flow field. The disturbances are expanded about the experimentally measured jet mean flow field, and evolved using linear parabolized stability equations (PSE) that account, in an approximate way, for the weakly non-parallel jet mean flow field. We utilize data from an extensive microphone array that measures pressure fluctuations just outside the jet shear layer to show that, up to an unknown initial disturbance spectrum, the phase, wavelength, and amplitude envelope of convecting wavepackets agree well with PSE solutions at frequencies and azimuthal wavenumbers that can be accurately measured with the array. We next apply the proper orthogonal decomposition to near-field velocity fluctuations measured with particle image velocimetry, and show that the structure of the most energetic modes is also similar to eigenfunctions from the linear theory. Importantly, the amplitudes of the modes inferred from the velocity fluctuations are in reasonable agreement with those identified from the microphone array. The results therefore suggest that, to predict, with reasonable accuracy, the evolution of the largest-scale structures that comprise the most energetic portion of the turbulent spectrum of natural jets, nonlinear effects need only be indirectly accounted for by considering perturbations to the mean turbulent flow field, while neglecting any non-zero frequency disturbance interactions.

Investigation on hydrodynamic forces leading to coarse particle entrainment using Large-Eddy Simulations

2021 ◽  
Author(s):  
Gaston Latessa ◽  
Angela Busse ◽  
Manousos Valyrakis
Keyword(s):  
Experimental Data ◽  
Flow Field ◽  
Large Scale ◽  
Large Eddy Simulations ◽  
Flow Conditions ◽  
Mean Flow ◽  
Protection Measures ◽  
Practical Applications ◽  
Particle Entrainment ◽  
Large Eddy

<p>The prediction of particle motion in a fluid flow environment presents several challenges from the quantification of the forces exerted by the fluid onto the solids -normally with fluctuating behaviour due to turbulence- and the definition of the potential particle entrainment from these actions. An accurate description of these phenomena has many practical applications in local scour definition and to the design of protection measures.</p><p>In the present work, the actions of different flow conditions on sediment particles is investigated with the aim to translate these effects into particle entrainment identification through analytical solid dynamic equations.</p><p>Large Eddy Simulations (LES) are an increasingly practical tool that provide an accurate representation of both the mean flow field and the large-scale turbulent fluctuations. For the present case, the forces exerted by the flow are integrated over the surface of a stationary particle in the streamwise (drag) and vertical (lift) directions, together with the torques around the particle’s centre of mass. These forces are validated against experimental data under the same bed and flow conditions.</p><p>The forces are then compared against threshold values, obtained through theoretical equations of simple motions such as rolling without sliding. Thus, the frequency of entrainment is related to the different flow conditions in good agreement with results from experimental sediment entrainment research.</p><p>A thorough monitoring of the velocity flow field on several locations is carried out to determine the relationships between velocity time series at several locations around the particle and the forces acting on its surface. These results a relevant to determine ideal locations for flow investigation both in numerical and physical experiments.</p><p>Through numerical experiments, a large number of flow conditions were simulated obtaining a full set of actions over a fixed particle sitting on a smooth bed. These actions were translated into potential particle entrainment events and validated against experimental data. Future work will present the coupling of these LES models with Discrete Element Method (DEM) models to verify the entrainment phenomena entirely from a numerical perspective.</p>

Flow field and acoustics characteristics of elliptical jet

2018 ◽  
Vol 90 (9) ◽  
pp. 1364-1371 ◽  
Author(s):  
S. Manigandan ◽  
Vijayaraja K.
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Rapid Change ◽  
Supersonic Jet ◽  
Major Axis ◽  
Minor Axis ◽  
Shock Cell ◽  
Potential Core ◽  
Content Type ◽  
Elliptical Jet

Purpose The purpose of this paper is to present the results of mixing promotion and screech frequency of controlled elliptical supersonic jet. Design/methodology/approach Flow field characteristics of low-aspect-ratio elliptical jets are examined at over-expanded, under-expanded and correctly expanded conditions. The tabs are placed at elliptical jet exit along the major and minor axes. Findings The results show that the mixing done by the minor axis is superior to the tabs along major axis. At all pressure ratios, the content of jet noise and the frequency are high for the tabs along the major axis because of increase in the amplitude of screech frequency. Further the tabs along minor axis show a dominance of large-scale vertical structures. In under-expanded conditions, the shock cell shows the rapid change because of the presence of tabs. The tabs along minor axis are making the shock weaker, hence no evidence of axis switching. Practical implications To achieve the greater performance of jet, the authors need to reduce the potential core length of the issuing jet. This can be achieved by implementing different types of tabs at the exit of the nozzle. Originality/value The present paper represents the flow of controlled jet using inverted triangular tabs. By achieving the controlled jet flow, the performance of propulsion systems can be improved. This can be used in systems such as combustion chamber, missile’s noise reduction and thrust vector control.

WAVELET-BASED POSTPROCESSING OF JET LES DATA FOR ACOUSTIC FAR-FIELD EXTRAPOLATIONS

2013 ◽  
Vol 21 (04) ◽  
pp. 1350017
Author(s):  
RAMIN KAVIANI ◽  
VAHID ESFAHANIAN ◽  
MOHAMMAD EBRAHIMI
Keyword(s):  
Large Scale ◽  
Stokes Equations ◽  
Near Field ◽  
Flow Simulation ◽  
Computational Time ◽  
Jet Flows ◽  
Small Scale ◽  
Frequency Noise ◽  
Far Field ◽  
Noise Sources

The affordable grid resolutions in conventional large-eddy simulations (LESs) of high Reynolds jet flows are unable to capture the sound generated by fluid motions near and beyond the grid cut-off scale. As a result, the frequency spectrum of the extrapolated sound field is artificially truncated at high frequencies. In this paper, a new method is proposed to account for the high frequency noise sources beyond the resolution of a compressible flow simulation. The large-scale turbulent structures as dominant radiators of sound are captured in LES, satisfying filtered Navier–Stokes equations, while for small-scale turbulence, a Kolmogorov's turbulence spectrum is imposed. The latter is performed via a wavelet-based extrapolation to add randomly generated small-scale noise sources to the LES near-field data. Further, the vorticity and instability waves are filtered out via a passive wavelet-based masking and the whole spectrum of filtered data are captured on a Ffowcs-Williams/Hawkings (FW-H) surface surrounding the near-field region and are projected to acoustic far-field. The algorithm can be implemented as a separate postprocessing stage and it is observed that the computational time is considerably reduced utilizing a hybrid of many-core and multi-core framework, i.e. MPI-CUDA programming. The comparison of the results obtained from this procedure and those from experiments for high subsonic and transonic jets, shows that the far-field noise spectrum agree well up to 2 times of the grid cut-off frequency.

The Impact of Compressor Exit Conditions on Fuel Injector Flows

2012 ◽  
Vol 134 (11) ◽  
Author(s):  
C. L. Ford ◽  
J. F. Carrotte ◽  
A. D. Walker
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Numerical Data ◽  
Flow Fields ◽  
Main Reaction ◽  
Fuel Injector ◽  
Lean Burn ◽  
Field Development ◽  
Inlet Conditions ◽  
The Impact

This paper examines the effect of compressor generated inlet conditions on the air flow uniformity through lean burn fuel injectors. Any resulting nonuniformity in the injector flow field can impact on local fuel air ratios and hence emissions performance. The geometry considered is typical of the lean burn systems currently being proposed for future, low emission aero engines. Initially, Reynolds-averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) predictions were used to examine the flow field development between compressor exit and the inlet to the fuel injector. This enabled the main flow field features in this region to be characterized along with identification of the various stream-tubes captured by the fuel injector passages. The predictions indicate the resulting flow fields entering the injector passages are not uniform. This is particularly evident in the annular passages furthest away from the injector centerline which pass the majority of the flow which subsequently forms the main reaction zone within the flame tube. Detailed experimental measurements were also undertaken on a fully annular facility incorporating an axial compressor and lean burn combustion system. The measurements were obtained at near atmospheric pressure/temperatures and under nonreacting conditions. Time-resolved and time-averaged data were obtained at various locations and included measurements of the flow field issuing from the various fuel injector passages. In this way any nonuniformity in these flow fields could be quantified. In conjunction with the numerical data, the sources of nonuniformities in the injector exit plane were identified. For example, a large scale bulk variation (+/−10%) of the injector flow field was attributed to the development of the flow field upstream of the injector, compared with localized variations (+/−5%) that were generated by the injector swirl vane wakes. Using this data the potential effects on fuel injector emissions performance can be assessed.

Near- and Far-Field Acoustic Measurements for Stepped Nozzles at Over- and Perfectly-Expanded Supersonic Jet Flow Conditions

2020 ◽  
Vol 142 (11) ◽  
Author(s):  
X. F. Wei ◽  
L. P. Chua ◽  
Z. B. Lu ◽  
H. D. Lim ◽  
R. Mariani ◽  
...  
Keyword(s):  
Near Field ◽  
Source Region ◽  
Supersonic Jet ◽  
Jet Flow ◽  
Far Field ◽  
Acoustic Measurements ◽  
Flow Conditions ◽  
Spectra Analysis ◽  
Highly Sensitive ◽  
Nozzle Configuration

Abstract Detailed near- and far-field acoustic measurements were conducted for two circular stepped nozzles with 30 deg and 60 deg design inclinations at over- and perfectly-expanded supersonic jet flow conditions and compared to those for a circular nonstepped nozzle. Far-field acoustic results show that stepped nozzles play an insignificant role in altering noise emissions at perfectly expanded condition. At an over-expanded condition, however, the longer stepped nozzle produces significant noise reductions at the sideline and upstream quadrants, while the shorter stepped nozzle does not. Noise spectra analysis and Schlieren visualizations show that noise reduction can be primarily attributed to mitigations in the broadband shock-associated noise (BSAN), due to the ability of the longer stepped nozzle in suppressing shock strengths at downstream region. Near-field acoustic measurements reveal that the source region, as well as the intensity of turbulent and shock noises, are highly sensitive to the stepped nozzle configuration. Furthermore, BSAN seems to be eliminated by the longer stepped nozzle in near-field region due to the shock structure modifications.

Sign in / Sign up

Export Citation Format

Share Document