STUDIES OF THE MARINE MAIN ENGINES CYLINDER LINERS AND PISTON RINGS RUNNING � IN PROCESS WITH THE APPLICATION OF THE �ALPHA LUBRICATOR� CYLINDER LINERS LUBRICATING SYSTEM

2017 ◽  
Author(s):  
Wlodzimierz Wlodzimierz
Keyword(s):  
Piston Rings ◽  
Cylinder Liners

scholarly journals Wear of different material pairings for the cylinder liner – piston ring contact

2018 ◽  
Vol 70 (4) ◽  
pp. 687-699 ◽  
Author(s):  
Thomas Wopelka ◽  
Ulrike Cihak-Bayr ◽  
Claudia Lenauer ◽  
Ferenc Ditrói ◽  
Sándor Takács ◽  
...  
Keyword(s):  
Steady State ◽  
Wear Mechanisms ◽  
Piston Ring ◽  
Cylinder Liner ◽  
Wear Behaviour ◽  
Special Focus ◽  
Intermediate Step ◽  
Piston Rings ◽  
Content Type ◽  
Cylinder Liners

Purpose This paper aims to investigate the wear behaviour of different materials for cylinder liners and piston rings in a linear reciprocating tribometer with special focus on the wear of the cylinder liner in the boundary lubrication regime. Design/methodology/approach Conventional nitrided steel, as well as diamond-like carbon and chromium nitride-coated piston rings, were tested against cast iron, AlSi and Fe-coated AlSi cylinder liners. The experiments were carried out with samples produced from original engine parts to have the original surface topography available. Radioactive tracer isotopes were used to measure cylinder liner wear continuously, enabling separation of running-in and steady-state wear. Findings A ranking of the material pairings with respect to wear behaviour of the cylinder liner was found. Post-test inspection of the cylinder samples by scanning electron microscopy (SEM) revealed differences in the wear mechanisms for the different material combinations. The results show that the running-in and steady-state wear of the liners can be reduced by choosing the appropriate material for the piston ring. Originality/value The use of original engine parts in a closely controlled tribometer environment under realistic loading conditions, in conjunction with continuous and highly sensitive wear measurement methods and a detailed SEM analysis of the wear mechanisms, forms an intermediate step between engine testing and laboratory environment testing.

The elastohydrodynamic lubrication of piston rings

1983 ◽  
Vol 386 (1791) ◽  
pp. 409-430 ◽  
Keyword(s):  
Film Thickness ◽  
Combustion Chamber ◽  
Diesel Engines ◽  
Elastohydrodynamic Lubrication ◽  
Cylinder Liner ◽  
Piston Rings ◽  
Lubrication Regimes ◽  
Piston Seal ◽  
Cylinder Liners ◽  
Lubricant Viscosity

The piston seal that separates the hostile environment of the combustion chamber from the crankcase that contains the lubricant is an essential machine element in reciprocating engines. The sealing force pressing the piston rings against the cylinder liner varies with the combustion chamber pressure to form an effective self-adjusting mechanism. The conjunctions between piston rings and cylinder liners are thus subjected to cyclic variations of load, entraining velocity and effective lubricant temperature as the piston reciprocates within the cylinder. Recent theoretical and experimental studies have confirmed that piston rings enjoy hydrodynamic lubrication throughout most of the engine cycle, but that a transition to mixed or boundary lubrication can be expected near top dead centre. The purpose of the present paper is to examine the suggestion that elastohydrodynamic lubrication might contribute to the tribological performance of the piston seal, particularly near top dead centre. The mode of lubrication in eight four-stroke and six two-stroke diesel engines is assessed in terms of the dimensionless viscosity and elasticity parameters proposed by Johnson (1970), and the associated map of lubrication régimes. The survey indicates unequivocally that elastohydrodynamic action can be expected during part of the stroke in all the engines considered. In the second part of the paper a detailed examination of the influence of elastohydrodynamic action in one particular engine is presented to confirm the general findings recorded in the study of lubrication régimes. Current analysis of the lubrication of rigid piston rings already takes account of the variation of surface temperature along the cylinder liner and its influence upon lubricant viscosity. It is shown that, when the enhancing influence of pressure upon viscosity is added to the analysis of rigid piston rings, the predicted cyclic minimum film thickness is more than doubled. Full elastohydrodynamic action, involving both local distortion of the elastic solids and the influence of pressure upon viscosity, results in a fourfold increase in film thickness. It is further shown that it is necessary to take account of the variation of squeeze-film velocity throughout the lubricated conjunction at each crank angle if reliable predictions of film shape and thickness are to be achieved. It is thus concluded that the wave of elastic deformation, which ripples up and down the cylinder liners many times each second in diesel engines, together with the associated local elastic deformations on the piston rings themselves, combine with the influence of pressure upon lubricant viscosity to enhance the minimum oil film thickness in the piston seal by elastohydrodynamic action.

scholarly journals An Improved Lubrication Model between Piston Rings and Cylinder Liners with Consideration of Liner Dynamic Deformations

Energies ◽  
2017 ◽  
Vol 10 (12) ◽  
pp. 2122 ◽  
Author(s):  
Guoxing Li ◽  
Fengshou Gu ◽  
Tie Wang ◽  
Xingchen Lu ◽  
Li Zhang ◽  
...  
Keyword(s):  
Piston Rings ◽  
Cylinder Liners

A Model for Wear and Friction in Cylinder Liners and Piston Rings

2006 ◽  
Vol 49 (3) ◽  
pp. 315-327 ◽  
Author(s):  
ZHENG MA ◽  
NAEIM A. HENEIN ◽  
WALTER BRYZIK
Keyword(s):  
Piston Rings ◽  
Wear And Friction ◽  
Cylinder Liners
Sign in / Sign up

Export Citation Format

Share Document