TESTING OF THE INFLUENCE OF RECLAIMED ASPHALT PAVEMENT AND MANUFACTURE WASTE ASPHALT SHINGLES ON THE PROPERTIES OF ASPHALT CONCRET

Author(s):  
Piotr Zielinski
Author(s):  
Yuan Zhang ◽  
Daniel Swiertz ◽  
Hussain U. Bahia

The purpose of this study is to assess the use of blended binder tests to estimate mixture performance properties of high reclaimed asphalt pavement (RAP)/recycled asphalt shingles (RAS) mixtures utilizing recycling agents as a means to evaluate different recycling agents and estimate their doses for a given mixture. Blended binder properties are measured by using standard performance grading (PG) and PG+ test methods and correlating the results with corresponding performance properties of mixtures. Blended binders consisting of virgin and recovered binders and recycling agents were prepared and tested for PG grading properties, multiple stress creep recovery grades, and linear amplitude sweep fatigue life after the rolling thin-film oven and pressure aging vessel aging. Mixtures were tested for rutting resistance and cracking resistance at intermediate temperature and at low temperatures after being subjected to short-term oven aging and long-term oven aging. The correlation between the blended binder properties and mixture performance properties is used to identify the binder test parameters that can be used to predict the long-term performance of high RAP/RAS mixtures and the effects of various recycling agents. Results generally indicate that use of direct testing of recovered binders with recycling agents is an effective means to estimate required initial dose for recycling agent, and testing actual blended binders can be used to predict mixture performance-related properties for the testing conditions used in this study.


2021 ◽  
Vol 6 (3) ◽  
Author(s):  
Mohammad Ashiqur Rahman ◽  
Rouzbeh Ghabchi ◽  
Musharraf Zaman ◽  
Syed Ashik Ali

AbstractDespite significant economic and environmental benefits, performance of warm mix asphalt (WMA) containing reclaimed asphalt pavement (RAP) remains a matter of concern. Among the current WMA technologies, the plant foaming technique (called “foamed WMA” in this study) has gained the most attention, since it eliminates the need for chemical additives. In the present study, the laboratory performance, namely rutting and moisture-induced damage potential of foamed WMA containing RAP were evaluated and compared with those of similar hot mix asphalt (HMA) containing identical amount of RAP. Dynamic modulus, Hamburg wheel tracking (HWT) and flow number tests were performed to assess the rutting resistance of the mixes. Also, stripping inflection point from HWT tests and tensile strength ratio after AASHTO T 283 and moisture induced sensitivity test (MIST) conditioning were used to evaluate the moisture-induced damage of asphalt mixes. It was found that MIST conditioning effectively simulates the moisture-induced damage and can capture the propensity of asphalt mixes to moisture damage more distinctly compared to AASHTO T 283 method due to application of cyclic loadings. The foamed WMA was found to exhibit higher rutting and moisture-induced damage potential due to lower mixing and compaction temperatures compared to HMA. However, the increase in RAP content was found to reduce rutting and moisture-induced damage potential for WMA. Therefore, the lower stiffness of foamed WMA may be compensated with the addition of stiffer binder from RAP.


Sign in / Sign up

Export Citation Format

Share Document