Simultaneous Determination of Total Vitamins B1, B2, B3, and B6 in Infant Formula and Related Nutritionals by Enzymatic Digestion and LC-MS/MS: Single-Laboratory Validation, First Action 2015.14

2016 ◽  
Vol 99 (3) ◽  
pp. 776-785 ◽  
Author(s):  
Louis M Salvati ◽  
Sean C McClure ◽  
Todime M Reddy ◽  
Nicholas A Cellar
Keyword(s):  
Standard Deviation ◽  
Simultaneous Determination ◽  
Relative Standard Deviation ◽  
Infant Formula ◽  
Vitamin B3 ◽  
Method Performance ◽  
Sample Extract ◽  
Relative Standard ◽  
Single Laboratory

Abstract This method provides simultaneous determination of total vitamins B1, B2, B3, and B6 in infant formula and related nutritionals (adult and infant). The method was given First Action for vitamins B1, B2, and B6, but not B3, during the AOAC Annual Meeting in September 2015. The method uses acid phosphatase to dephosphorylate the phosphorylated vitamin forms. It then measures thiamine (vitamin B1); riboflavin (vitamin B2); nicotinamide and nicotinic acid (vitamin B3); and pyridoxine, pyridoxal, and pyridoxamine (vitamin B6) from digested sample extract by liquid chromatography-tandem mass spectrometry. A single-laboratory validation was performed on 14 matrixes provided by the AOAC Stakeholder Panel on Infant Formula and Adult Nutritionals (SPIFAN) to demonstrate method effectiveness. The method met requirements of the AOAC SPIFAN Standard Method Performance Requirement for each of the three vitamins, including average over-spike recovery of 99.6 ± 3.5%, average repeatability of 1.5 ± 0.8% relative standard deviation, and average intermediate precision of 3.9 ± 1.3% relative standard deviation.

scholarly journals Simultaneous Determination of Free Carnitine and Total Choline by Liquid Chromatography/Mass Spectrometry in Infant Formula and Health-Care Products: Single-Laboratory Validation

2008 ◽  
Vol 91 (4) ◽  
pp. 777-785 ◽  
Author(s):  
Pierre Andrieux ◽  
Tamara Kilinc ◽  
Christian Perrin ◽  
Esther Campos-Giménez
Keyword(s):  
Health Care ◽  
Standard Deviation ◽  
Simultaneous Determination ◽  
Relative Standard Deviation ◽  
Infant Formula ◽  
Free Carnitine ◽  
Official Method ◽  
Relative Standard ◽  
Single Laboratory

Abstract A single-laboratory validation study was conducted for a liquid chromatographic/mass spectrometric (LC/MS) method for the simultaneous determination of the free carnitine and total choline in milk-based infant formula and health-care products. The sample preparation used for both carnitine and choline was adapted from AOAC Official Method 999.14, with an acidic and enzymatic hydrolysis of esterified forms of choline. Carnitine and choline were quantified by ion-pair chromatography with single-quadrupole MS detection, using their respective deuterated internal standards. The repeatability relative standard deviation was 2.5 and 2.1, respectively, for carnitine and choline. The intermediate reproducibility relative standard deviation was <4.7 and 2.4, respectively, for carnitine and choline. The ranges of the average product-specific recoveries were 9298 and 94103, respectively, for carnitine and choline. Choline concentration determined in infant formula reference material SRM 1846 was in agreement with the reference value. The proposed method was compared with the enzymatic methods for a range of products; good correlation (r = 0.99) was obtained, although a significant bias was observed for both analytes. The method, with a short chromatographic run time (7 min), is convenient for routine analysis to enhance analytical throughput and is a good alternative to enzymatic assays.

scholarly journals Indirect and Direct Determination of the Casein Content of Milk by Kjeldahl Nitrogen Analysis: Collaborative Study

1998 ◽  
Vol 81 (4) ◽  
pp. 763-774 ◽  
Author(s):  
Joanna M Lynch ◽  
David M Barbano ◽  
J Richard Fleming
Keyword(s):  
Standard Deviation ◽  
Nitrogen Content ◽  
Relative Standard Deviation ◽  
Collaborative Study ◽  
Direct Determination ◽  
Raw Milk ◽  
Method Performance ◽  
Relative Standard ◽  
Milk Casein

Abstract The classic method for determination of milk casein is based on precipitation of casein at pH 4.6. Precipitated milk casein is removed by filtration and the nitrogen content of either the precipitate (direct casein method) or filtrate (noncasein nitrogen; NCN) is determined by Kjeldahl analysis. For the indirect casein method, milk total nitrogen (TN; Method 991.20) is also determined and casein is calculated as TN minus NCN. Ten laboratories tested 9 pairs of blind duplicate raw milk materials with a casein range of 2.42- 3.05℅ by both the direct and indirect casein methods. Statistical performance expressed in protein equivalents (nitrogen ⨯ 6.38) with invalid and outlier data removed was as follows: NCN method (wt%), mean = 0.762, sr = 0.010, SR = 0.016, repeatability relative standard deviation (RSDr) = 1.287℅, reproducibility relative standard deviation (RSDR) = 2.146%; indirect casein method (wt℅), mean = 2.585, repeatability = 0.015, reproducibility = 0.022, RSDr = 0.560℅, RSDR = 0.841; direct casein method (wt℅), mean = 2.575, sr = 0.015, sR = 0.025, RSDr = 0.597℅, RSDR = 0.988℅. Method performance was acceptable and comparable to similar Kjeldahl methods for determining nitrogen content of milk (Methods 991.20, 991.21,991.22, 991.23). The direct casein, indirect casein, and noncasein nitrogen methods have been adopted by AOAC INTERNATIONAL.

2-Monochloropropanediol (2-MCPD), 3-Monochloropropanediol (3-MCPD), and Glycidol in Infant and Adult/Pediatric Nutritional Formula: Single-Laboratory Validation, First Action 2018.12

2019 ◽  
Vol 102 (4) ◽  
pp. 1205-1220 ◽  
Author(s):  
Jan Kuhlmann
Keyword(s):  
Fatty Acid ◽  
Infant Formula ◽  
Edible Oils ◽  
Accurate Determination ◽  
Fatty Acid Esters ◽  
Method Performance ◽  
Relative Standard ◽  
Single Laboratory ◽  
Acid Esters

Abstract Background: Fatty acid esters of glycidol, 2-Monochloropropanediol (MCPD), and 3-MCPD are heat-induced foodborne processing contaminants with possible adverse health effects. These compounds occur frequently in refined edible oils. Consequently, glycidyl esters and 2- and 3-MCPD esters might also be present in foods that contain refined edible oils. Objective: This manuscript describes the single-laboratory validation of an analytical method for the quantitative determination of glycidol, 2-MCPD, and 3-MCPD present as fatty acid esters or as free 2- or 3-MCPD in infant and adult/pediatric nutritional formula. Methods: Technically, the presented method is based on the combination of a Heat-Ultrasound Pressure-supported Solvent Extraction and a GC–MS determination of glycidol, 2-MCPD, and 3-MCPD. From a chemical perspective, the method includes an alkaline catalyzed transesterification, conversion of the unstable glycidol into monobromopropanediol, and the parallel derivatization of all analytes with phenylboronic acid. Results: Validation results showed that method linearity for all analytes in powdered and liquid infant formula ranged from 0.9981 to 0.9999 (n = 18). Repeatability relative standard deviation values for concentration levels between 1.3 μg/kg and 331 μg/kg were in the range of 1 to 12%. Relative recoveries were found to be between 93 and 107%. The analytes were quantifiable down to 5–10 μg/kg in powdered samples and 1–2 μg/kg in liquid samples. Conclusions: The reported results met actual AOAC Standard Method Performance Requirements. Highlights: In terms of consumer protection, the presented method is a novel approach for the sensitive and accurate determination of glycidol, 2-MCPD, and 3-MCPD in infant formula and related foodstuffs.

scholarly journals Determination of Clopidol Residues in Chicken Tissues by Liquid Chromatography: Collaborative Study

2003 ◽  
Vol 86 (4) ◽  
pp. 685-693 ◽  
Author(s):  
Guo-Fang Pang ◽  
Yan-Zhong Cao ◽  
Chun-Lin Fan ◽  
Jin-Jie Zhang ◽  
Xue-Min Li ◽  
...  
Keyword(s):  
Liquid Chromatography ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Solid Phase ◽  
Collaborative Study ◽  
Reversed Phase ◽  
Method Performance ◽  
Chicken Muscle ◽  
Relative Standard

Abstract Eighteen laboratories participated in a collaborative study on the determination of clopidol residues in chicken muscle tissues by liquid chromatography. Of these, results from 16 laboratories which rigorously followed the method were subjected to statistical analysis. The method performance was assessed by all participants using 14 samples of chicken muscle fortified at concentrations ranging from 0.1 to 5.0 mg/kg. In addition, 9 participants each reported results for 6 clopidol-incurred samples in chicken muscle. Test portions were extracted with acetonitrile, and the extracts were purified with alumina and anion exchange resin solid-phase extraction cartridges in sequence. Clopidol was separated by reversed-phase liquid chromatography and quantified at 270 nm. Average recoveries ranged from 81.8 to 85.4%, reproducibility relative standard deviation (RSDR) ranged from 11.9 to 22.6%, and repeatability relative standard deviation (RSDr) ranged from 9.9 to 15.1%. For clopidol-incurred samples at concentrations of 0.100–0.687 mg/kg, the mean determination value range was 0.099–0.659 mg/kg; RSDR was 12.6–19.8%, RSDr was 3.1–8.5%; and HORRAT values were 0.7–1.1. The accuracy and precision of the method are in conformity with the requirements specified by AOAC INTERNATIONAL. The method was adopted Official First Action in April 2003.

scholarly journals Application of Derivative Spectrophotometry for Simultaneous Determination of Quinapril and Hydrochlorothiazide in the Combination Tablets

2004 ◽  
Vol 87 (4) ◽  
pp. 847-851 ◽  
Author(s):  
Dorota Kowalczuk ◽  
Hanna Hopkała
Keyword(s):  
Standard Deviation ◽  
Simultaneous Determination ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Derivative Spectrophotometry ◽  
Order Derivative ◽  
Zero Crossing ◽  
Relative Standard ◽  
Separation Of Components

Abstract A new second-order-derivative spectrophotometric method using zero-crossing technique measures quinapril (QUI) and hydrochlorothiazide (HYD) in 2-component mixtures. The procedure does not require prior separation of components from the sample. QUI was determined at a wavelength of 211.6 nm (zero-crossing wavelength point of HYD). Similarly, HYD was measured at 270.8 nm (zero-crossing wavelength point of QUI). Calibration graphs were constructed over the concentration range of 4.0 to 24.0 μ/mL for QUI and 2.5 to 15.0 μg/mL for HYD. Detection and quantitation limits were 0.85 and 2.5 μg/mL for QUI and 0.12 and 0.4 μg/mL for HYD, respectively. The accuracy (recovery 100.5–102%), precision (relative standard deviation less than 3.5% for QUI and 1.5% for HYD), selectivity, and sensitivity of the elaborated methods were satisfactory. The proposed method was applied successfully for the determination of both drugs in QUI-HYD tablets.

scholarly journals Determination of Aflatoxin B1 in Baby Food (Infant Formula) by Immunoaffinity Column Cleanup Liquid Chromatography with Postcolumn Bromination: Collaborative Study

2001 ◽  
Vol 84 (4) ◽  
pp. 1116-1124 ◽  
Author(s):  
Joerg Stroka ◽  
Elke Anklam ◽  
Urban Joerissen ◽  
John Gilbert ◽  
A Barmark ◽  
...  
Keyword(s):  
Liquid Chromatography ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Infant Formula ◽  
Aflatoxin B1 ◽  
Collaborative Study ◽  
Baby Food ◽  
Immunoaffinity Column ◽  
Relative Standard

Abstract A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B1 in a milk powder based infant formula at a possible future European regulatory limit (0.1 ng/g). The test portion was extracted with methanol–water (8 + 2 [v + v]), filtered, diluted with water, and applied to an immunoaffinity column. The column was washed with water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. The separation and determination of the aflatoxin B1 was performed by reversed-phase LC and detected by fluorescence after postcolumn derivatization (PCD) involving bromination. PCD was achieved with either pyridinum hydrobromide perbromide (PBPB) or an electrochemical (Kobra) cell by addition of bromide to the mobile phase. The baby food (infant formula) test samples, both spiked and naturally contaminated with aflatoxin B1, were sent to 14 laboratories in 13 different European countries. Test portions were spiked at levels of 0.1 and 0.2 ng/g for aflatoxin B1. Recoveries ranged from 101 to 92%. Based on results for spiked test samples (blind pairs at 2 levels) and naturally contaminated test samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 3.5 to 14%. The relative standard deviation for reproducibility (RSDR) ranged from 9 to 23%. Nine participants used PBPB derivatization, and 5 particpants used the Kobra cell. There was no evidence of method performance depending on the derivatization method used. The method showed acceptable within- and between-laboratory precision for baby food matrix, as evidenced by HORRAT values, at the target levels of determination for aflatoxin B1.

scholarly journals Simultaneous Determination of N-Butylscopolamine and Oxazepam in Pharmaceutical Formulations by First-Order Digital Derivative Spectrophotometry

2005 ◽  
Vol 88 (4) ◽  
pp. 1173-1178 ◽  
Author(s):  
Maria Inés Toral ◽  
Marcelo A Muñoz ◽  
Sandra L Orellana
Keyword(s):  
Standard Deviation ◽  
Simultaneous Determination ◽  
Relative Standard Deviation ◽  
Pharmaceutical Formulations ◽  
Derivative Spectrophotometry ◽  
Simple Method ◽  
Zero Crossing ◽  
First Order ◽  
Relative Standard

Abstract A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20° and 80°C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 × 10−7 to 8.0 × 10−5 mol/L for N-butylscopolamine and 7.1 × 10−8 to 8.0 × 10−5 mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).

scholarly journals Determination of Deoxynivalenol in Cereals and Cereal Products by Immunoaffinity Column Cleanup with Liquid Chromatography: Interlaboratory Study

2005 ◽  
Vol 88 (4) ◽  
pp. 1197-1204 ◽  
Author(s):  
Susan J MacDonald ◽  
Danny Chan ◽  
Paul Brereton ◽  
Andrew Damant ◽  
Roger Wood ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Wheat Flour ◽  
Interlaboratory Study ◽  
Immunoaffinity Column ◽  
Breakfast Cereal ◽  
Cereal Products ◽  
Sample Extract ◽  
Relative Standard

Abstract An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic (LC) method for the determination of deoxynivalenol in a variety of cereals and cereal products at proposed European regulatory limits. The test portion was extracted with water. The sample extract was filtered and applied to an immunoaffinity column. After being washed with water, the deoxynivalenol was eluted with acetonitrile or methanol. Deoxynivalenol was quantitated by reversed-phase LC with UV determination. Samples of artificially contaminated wheat-flour, rice flour, oat flour, polenta, and a wheat based breakfast cereal, naturally contaminated wheat flour, and blank (very low level) samples of each matrix were sent to 13 collaborators in 7 European countries. Participants were asked to spike test portions of all samples at a range of deoxynivalenol concentrations equivalent to 200–2000 ng/g deoxynivalenol. Average recoveries ranged from 78 to 87%. Based on results for 6 artificially contaminated samples (blind duplicates), the relative standard deviation for repeatability (RSDr) ranged from 3.1 to 14.1%, and the relative standard deviation for reproducibility (RSDR) ranged from 11.5 to 26.3%. The method showed acceptable within-laboratory and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values <1.3.

scholarly journals Determination of Zearalenone in Barley, Maize and Wheat Flour, Polenta, and Maize-Based Baby Food by Immunoaffinity Column Cleanup with Liquid Chromatography: Interlaboratory Study

2005 ◽  
Vol 88 (6) ◽  
pp. 1733-1740 ◽  
Author(s):  
Susan J MacDonald ◽  
Sharron Anderson ◽  
Paul Brereton ◽  
Roger Wood ◽  
Andrew Damant ◽  
...  
Keyword(s):  
Liquid Chromatography ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Baby Food ◽  
Interlaboratory Study ◽  
Affinity Column ◽  
Test Portion ◽  
Sample Extract ◽  
Relative Standard

Abstract An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an affinity column cleanup liquid chromatography (LC) method for the determination of zearalenone (ZON) in a variety of cereals and cereal products at proposed European regulatory limits. The test portion is extracted with acetonitrile:water. The sample extract is filtered, diluted, and applied to an affinity column. The column is washed, and ZON is eluted with acetonitrile. ZON is quantified by reversed-phase LC with fluorescence detection. Barley, wheat and maize flours, polenta, and a maize-based baby food naturally contaminated, spiked, and blank (very low level) were sent to 28 collaborators in 9 European countries and 1 collaborator in New Zealand. Participants were asked to spike test portions of all samples at a ZON concentration equivalent to 100 μg/kg. Average recoveries ranged from 91–111%. Based on results for 4 artificially contaminated samples (blind duplicates) and 1 naturally contaminated sample (blind duplicate), the relative standard deviation for repeatability (RSDr) ranged from 6.9–35.8%, and the relative standard deviation for reproducibility (RSDR) ranged from 16.4–38.2%. The method showed acceptable within- and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values <1.7.

scholarly journals Development and Validation of an ICP-MS Method for Simultaneous Determination of Selected Metals in Electronic Cigarette Aerosol

2018 ◽  
Vol 28 (1) ◽  
pp. 2-13
Author(s):  
Shintaro Ohashi
Keyword(s):  
Standard Deviation ◽  
Nitric Acid ◽  
Simultaneous Determination ◽  
Propylene Glycol ◽  
Relative Standard Deviation ◽  
Icp Ms ◽  
Relative Standard ◽  
The Mean ◽  
The Impact

SummarySafety and quality standards for electronic cigarettes (e-cigarettes) have been introduced regionally. In 2016, the U.S. Food and Drug Administration (FDA) issued a rule to regulate e-cigarettes, requiring to report harmful and potentially harmful constituents (HPHCs). In the United Kingdom, the British Standards Institution (BSI) specified the metals to be monitored for e-cigarettes. In this study, a method was developed and validated for the simultaneous determination of 13 metals (Be, Al, Cr, Fe, Co, Ni, Cu, As, Se, Ag, Cd, Sn and Pb) in e-cigarette aerosol. Furthermore, matrix effects of major constituents in the aerosol were investigated using glycerol or 1,2-propylene glycol solutions. E-cigarette aerosol was generated by a rotary smoking machine according to CORESTA Recommended Method N° 81 and collected by an electrostatic precipitator coupled to an impinger containing nitric acid. The collected aerosol was dissolved in nitric acid and an aliquot of this solution was analyzed by inductively coupled plasma mass spectrometry (ICP-MS) equipped with a collision/reaction cell.The linearity of the calibration curve was observed in the range of 0.2 to 100 ng/mL for each analyte; the correlation coefficients were 0.998 or larger, the mean recovery of each standard level ranged from 92.6 to 104.5% and the relative standard deviation amounted to max. 9.5%. Accuracy, repeatability and specificity were validated by spiking three different amounts of analytes into e-cigarette aerosol; the mean recovery of each spiking level ranged from 88.7 to 110.3% with a relative standard deviation amounting to max. 9.2% for all analytes. Background contamination from aerosol generation and collection system existed for some analytes, especially for Al, Fe, Cu and Sn. The potential sources of contamination should be identified and controlled to reduce the impact of contamination on quantification. In addition, the actual values for samples should be reported with method blank statistics. Increase of the concentrations of glycerol and 1,2-propylene glycol in the prepared sample led to the overestimation of As and Se. The amount of polyols in the collected aerosol should be monitored and controlled for the accurate quantification of As and Se.

Sign in / Sign up

Export Citation Format

Share Document