scholarly journals Preparation of Laundry Soap from Used Cooking Oils: Getting value out of waste

2020 ◽  
Vol 15 (1) ◽  
pp. 1-10
Author(s):  
Adane Legesse
Keyword(s):  
2021 ◽  
Vol 2 ◽  
Author(s):  
Legesse Adane ◽  
Tesfaye Gelaye ◽  
Tegene Tesfaye

Parthenium (Parthenium hysterophorus) weed is a noxious plant which inhabits many parts of the world. It is responsible for rapid environmental pollution causing a reduction in crop productivity by infesting farm lands and grazing lands. It also causes severe human and animal health problems. The aim of this study was assessing the potential of parthenium weed ash as a substitute for commercial alkali for the preparation of soap. Alkali solution was prepared from partheniun weed ash. Tests on its alkalinity properties revealed that the lye can be used for soap making. Similarly, the tests on physicochemical properties of the collected used cooking oil samples were found to be 141.0 ± 0.4–153.8 ± 0.33 mg KOH/g, 11.28 ± 0.5–14.1 ± 0.5 mg KOH/g, and 0.16 ± 0.2–0.19 ± 0.25 milieq/g for saponification value, acid value, and peroxide value, respectively. The data indicated that both the prepared lye solution and the collected used cooking oils would be suitable for soap preparation. Moreover, analyses of the moisture content, total alkali content, total fatty matter, the pH value, and chloride content of the prepared soap materials were found to be in the ranges of 10.5 ± 0.01–13 ± 0.01, 0.39 ± 0.01–1.63 ± 0.05%, 64.5 ± 0.16–76.4 ± 0.15%, 10.5 ± 0.03–10.63 ± 0.04, and 0.39 ± 0.2–0.45 ± 0.39%, respectively. The finding of the present study, is that it is possible to conclude that the Parthenium weed ash (or lye solution from this ash) and leftovers of used cooking oils can be used as cost-effective substitutes for commercial alkali solution and palm oil, respectively, for laundry soap preparation of acceptable grades. The finding also suggests that preparation of lye solution from parthenium weed ash can be used as an option for controlling the pollution of this invasive weed.


Resources ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 108 ◽  
Author(s):  
Alberto Mannu ◽  
Gina Vlahopoulou ◽  
Paolo Urgeghe ◽  
Monica Ferro ◽  
Alessandra Del Caro ◽  
...  

The chemical composition and the color of samples of waste cooking oils (WCOs) were determined prior to and after filtration on two different pads of bentonite differing in particle size. The volatile fraction was monitored by headspace solid-phase microextraction (HS-SPME) coupled with gas-chromatography, while the variation of the composition of the main components was analyzed by 1H NMR. Both techniques allowed the detection of some decomposition products, such as polymers, terpenes, and derivatives of the Maillard process. The analysis of the chemical composition prior to and after bentonite treatment revealed a tendency for the clays to retain specific chemical groups (such as carboxylic acids or double bonds), independent of their particle size. A pair comparison test was conducted in order to detect the sensory differences of the intensity of aroma between the WCO treated with the two different bentonites. In addition, characterization of the bentonite by means of powder X-ray diffraction (XRD) and thermogravimetric measurements (TG) was performed.


1995 ◽  
Vol 87 (11) ◽  
pp. 836-841 ◽  
Author(s):  
P. G. Shields ◽  
G. X. Xu ◽  
W. J. Blot ◽  
J. F. Fraumeni ◽  
G. E. Trivers ◽  
...  
Keyword(s):  

2018 ◽  
Vol 8 (1) ◽  
pp. 121-127 ◽  
Author(s):  
Tanzer Eryilmaz

In this study, the methyl ester production process from neutralized waste cooking oils is optimized by using alkali-catalyzed (KOH) single-phase reaction. The optimization process is performed depending on the parameters, such as catalyst concentration, methanol/oil ratio, reaction temperature and reaction time. The optimum methyl ester conversion efficiency was 90.1% at the optimum conditions of 0.7 wt% of potassium hydroxide, 25 wt% methanol/oil ratio, 90 min reaction time and 60°C reaction temperature. After the fuel characteristics of the methyl ester obtained under optimum conditions were determined, the effect on engine performance, CO and NOx emissions of methyl ester was investigated in a diesel engine with a single cylinder and direct injection. When compared to diesel fuel, engine power and torque decreased when using methyl ester, and specific fuel consumption increased. NOx emission increases at a rate of 18.4% on average through use of methyl ester.


Sign in / Sign up

Export Citation Format

Share Document