scholarly journals Particleboard Manufactured with Bicomponent Polyurethane Resin Base on Castor Oil

2013 ◽  
Vol 2 (6) ◽  
pp. 115-118 ◽  
Author(s):  
Sérgio Augusto Mello da Silva ◽  
André Luis Christoforo ◽  
Sérgio Luiz Moni Ribeiro Filho ◽  
Luciano Donizete Varanda ◽  
Francisco Antonio Rocco Lahr
Keyword(s):  
Castor Oil ◽  
Polyurethane Resin

OSB Panels with Balsa Wood Waste and Castor Oil Polyurethane Resin

2018 ◽  
Vol 11 (2) ◽  
pp. 743-751 ◽  
Author(s):  
Guilherme Henrique Ament Barbirato ◽  
Wanley Eduardo Lopes Junior ◽  
Victor Hellmeister ◽  
Mariana Pavesi ◽  
Juliano Fiorelli
Keyword(s):  
Castor Oil ◽  
Wood Waste ◽  
Balsa Wood ◽  
Polyurethane Resin

Characterization of Medium Density Particleborads Using Agricultural Residues

2015 ◽  
Vol 1088 ◽  
pp. 656-659
Author(s):  
Ivaldo D. Valarelli ◽  
Rosane A.G. Battistelle ◽  
Barbara Stolte Bezerra ◽  
Luiz A. Melgaço N. Branco ◽  
Eduardo Chahud ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Castor Oil ◽  
Mechanical Characteristics ◽  
Mechanical Characterization ◽  
Raw Materials ◽  
Construction Materials ◽  
Agricultural Residues ◽  
Medium Density ◽  
Polyurethane Resin

In recent years the production of products derived from wood and bamboo are increasing, due to the search for a more rational exploitation of these raw materials. Amongst these products, the particleboards production combine sustainability and rationality in the use of these materials. In this context, this work has the objective to study the application of alternative raw materials in the manufacture of Medium Density Particleboards (MDP), using residues from industrial processimg of coffee and bamboo. MDP had been produced with particles of giganteus bamboo of the Dendrocalamus species and particle of coffee rind in the intermediate layer of the particleboard, bonded with polyurethane resin based on castor oil. The physical and mechanical characterization was carried out accordingly to NBR 14810-3 (2006). The physical properties evaluated were: of water absorption for 2h and 24h; thickness swallowing for 2h and 24h; density, humidity content. The mechanical properties evaluated were: Tensile strength, static bending (MOR and MOE). The results were compared with NBR 14810-2 (2006) and also with the ANSI A208-1 (1993). The physical performance of these particleboards was below the values recommend by the Brazilian norm. Also the mechanical characteristics are not improve, demonstrating that the inclusion of coffee rind did not benefit the physical characteristics and nor the mechanical ones. However it can be used as construction materials for partitions and ceiling panels.

scholarly journals Production and characterization of MDF using eucalyptus fibers and castor oil-based polyurethane resin

2004 ◽  
Vol 7 (3) ◽  
pp. 421-425 ◽  
Author(s):  
Cristiane Inácio de Campos ◽  
Francisco Antonio Rocco Lahr
Keyword(s):  
Castor Oil ◽  
Polyurethane Resin

scholarly journals ANÁLISE DO COMPORTAMENTO DE PEÇAS ESTRUTURAIS DE MADEIRA LAMINADA COLADA COM RESINA POLI-URETANA SUBMETIDAS À COMPRESSÃO AXIAL

2018 ◽  
Vol 10 (Especial) ◽  
pp. 65-70
Author(s):  
Adriano Seidi Demarchi Mikami ◽  
Larissa Queiroz Minillo
Keyword(s):  
Mechanical Properties ◽  
Statistical Analysis ◽  
Axial Compression ◽  
Castor Oil ◽  
Physical And Mechanical Properties ◽  
Structural Timber ◽  
Assembly Process ◽  
Fast Growing ◽  
Polyurethane Resin ◽  
Glued Laminated Timber

The interest in replacing native wood with fast growing reforestation wood is recurrent, aiming at larger quantities of material in less time with no losses in its resistive properties. This paper consists in comparing the behavior of in natura structural timber parts with glued laminated timber, made with polyurethane resin based on castor oil, with regard to the resistance to axial compression. The assembly process of these pieces aims to achieve a similar or even superior resistance to the solid ones, considering that the MLC method allows the construction of structural pieces of many sizes and formats using different pieces of wood. Two this end, two species of wood, Pinus and Eucalyptus will be compared. The polyurethane resin, manufactured by the company Imperveg, was used in the process of glueing the stacks together. Evaluations will be performed according to NBR7190 (1997) aiming to characterize the physical and mechanical properties of the pieces and the results obtained will be submitted to statistical analysis by the Anova method.

Multilayer Medium Density Particleboard Using Castor Oil-Based Polyurethane Resin and Hevea Brasiliensis Wood

2014 ◽  
Vol 1025-1026 ◽  
pp. 559-563 ◽  
Author(s):  
Sarah David Muzel ◽  
Larissa Ribas de Lima ◽  
Maristela Gava ◽  
José Nivaldo Garcia ◽  
Juliana Cortez Barbosa ◽  
...  
Keyword(s):  
Hevea Brasiliensis ◽  
Castor Oil ◽  
Mechanical Characteristics ◽  
Mechanical Characterization ◽  
Urea Formaldehyde ◽  
Medium Density ◽  
Technical Standard ◽  
Multilayer Medium ◽  
Polyurethane Resin ◽  
European Standards

This work aimed to study the feasibility of using castor oil-based polyurethane (PU) resin, and rubberwood for the production of particleboards. Multilayer panels were produced using particles taken from RRIM 600 and GT1 clones of Hevea brasiliensis trees. Urea-formaldehyde (UF) and PU were used for bonding the particles. Physico-mechanical characterization was done according to the specifications of the European standards for wood-based panels. The average results were compared to values pre-established by the EN 312/2003 technical standard as well as between the above mentioned treatments. The results indicated that the use of PU and rubberwood has a great potential for particleboards production. The use of PU favors the production of boards with improved physical-mechanical characteristics.

Particleboards with Agricultural Wastes: Sugar Cane Bagasse and Reforestation Wood

2014 ◽  
Vol 600 ◽  
pp. 667-676 ◽  
Author(s):  
Sergio Luis de Castro Junior ◽  
Nubia Garzón ◽  
Daniel Williams ◽  
Flávio Luís Guesso ◽  
Holmer Savastano Junior ◽  
...  
Keyword(s):  
Sugarcane Bagasse ◽  
Sugar Cane ◽  
Castor Oil ◽  
Sugar Cane Bagasse ◽  
Furniture Industry ◽  
Polyurethane Resin ◽  
Structural Applications ◽  
Wood Particles ◽  
American Standard ◽  
Similar Density

In this paper, it was consider the study of the use of sugarcane bagasse and wood particles, residues from the agricultural and the furniture industry, in order to add value to such materials. To add value to these materials it will be utilized in the manufacturing of hybrid panels consisting of wood particles and sugarcane bagasse in certain proportions (20%, 40% and 60%). For the production it was used the bi-component polyurethane resin based on castor oil. Analysis of the products was established based on the physical-mechanical standard NBR 14.810:2006. The hybrid panels were analyzed according to the data obtained in relation to the American standard ANSI A208.1-1999, in order to determine the best treatment for the possible use as a lining in agricultural buildings. Moreover, the hybrid panels were contrasted with panels of other formulations, with similar density. It was evident that the treatment constituting of 40% of sugar cane bagasse and 60% of wood particles had the best physical-mechanical, and showed a potential for the use in non-structural applications.

Medium Density Particleboard (MDF) Produced with Pinus caribaea Fibers and Castor Oil Based Polyurethane Resin

2014 ◽  
Vol 1025-1026 ◽  
pp. 13-16 ◽  
Author(s):  
Sérgio Augusto Mello da Silva ◽  
Raquel Gonçalves ◽  
André Luis Christoforo ◽  
Francsico Antonio Rocco Lahr
Keyword(s):  
Mechanical Properties ◽  
Castor Oil ◽  
Initial Moisture Content ◽  
Resin Content ◽  
Pressing Pressure ◽  
Medium Density ◽  
Pinus Caribaea ◽  
Polyurethane Resin ◽  
European Code ◽  
New Research

This study aimed to investigate the possibility of using castor-oil based polyurethane resin (PU), formulated with 30 % solids and 70 % solvent, in production of Medium Density Fiberboards (MDF) withPinus caribaeafibers and two percentages of adhesive (5 and 10%). Six panels were fabricated under 4MPa pressing pressure, 190°C temperature. Initial moisture content of fibers was 9%. Properties investigated were: density of the panels; modulus of elasticity (MOE) and modulus or rupture (MOR) in static bending; and internal adhesion. Requirements of European Code EMB/IS-2 were used for comparison of results. Panels made with 10% of resin presented problems due gases expansion, disrupting the plates. For 5% resin content, mechanical properties investigated were above the requirements of the European Coded values. However, an undesirable odor prevented handling of the resin, in conditions here considered, which motivates the suggestion of new research in order to investigate different ratios between of solids and solvent contents, to completely enable the use of castor-oil based polyurethane resin MDF manufacture.

scholarly journals Eco-panels Based on Wastes from Urban Trees and Castor Oil Polyurethane Resin

2013 ◽  
Vol 3 (1) ◽  
pp. 12-15 ◽  
Author(s):  
Bertolini Marilia da Silva ◽  
Nascimento Maria Fátima do ◽  
Blecha Karen Aneris ◽  
Lahr Francisco Antonio Rocco
Keyword(s):  
Castor Oil ◽  
Urban Trees ◽  
Polyurethane Resin

scholarly journals Production and evaluation of particleboard made of sawdust and sugarcane bagasse with polyurethane resin based on castor oil

2019 ◽  
Vol 23 ◽  
pp. 9
Author(s):  
Raissa Pravatta Pivetta ◽  
Ana Laura Soler Cunha Buzo ◽  
Estéfani Suana Sugahara ◽  
Sérgio Augusto de Mello da Silva
Keyword(s):  
Sustainable Development ◽  
Moisture Content ◽  
Sugarcane Bagasse ◽  
Castor Oil ◽  
Agricultural Waste ◽  
Sugar Cane Bagasse ◽  
New Materials ◽  
Pressing Time ◽  
Polyurethane Resin ◽  
Nominal Density

Among the goals for sustainable development in Brazil, studies have been conducted to better use of industrial and agricultural waste to promote adequate final disposal of these and generate new materials that minimize the exploitation and use of natural resources. In this work, the proposal is to make and evaluate boards with nominal density of 0.80 g.cm-3 using sugar cane bagasse, sawdust and polyurethane resin derived from castor oil. Thus, three treatments with different percentages of particles and 10% of PU-castor were proposed for the preparation of boards that were pressed with a pressure of 50 kgf.cm-2, a temperature of 100°C and a pressing time of ten minutes. The boards were evaluated for their physical properties (density, moisture content and swelling) and mechanical (static flexure and perpendicular traction) according to NBR 14810: 2-2013 and presented average values density of 936 to 937 kg.m-3, swelling after 24 hours of 5.0 to 7.2%, modulus of resistance to static bending of 22 to 23 MPa and perpendicular traction of 0.71 to 0.87 MPa. The results obtained with the tests indicate the great potential of use of sugarcane bagasse and sawdust to produce boards of high density particles.

scholarly journals Production of Particleboards from Hevea brasiliensis Clones and Castor Oil-based Polyurethane Resin

BioResources ◽  
2015 ◽  
Vol 10 (4) ◽  
Author(s):  
Maristela Gava ◽  
Sarah David Müzel ◽  
Larissa Ribas De Lima ◽  
Juliana Cortez Barbosa ◽  
José Nivaldo Garcia ◽  
...  
Keyword(s):  
Hevea Brasiliensis ◽  
Castor Oil ◽  
Polyurethane Resin
Sign in / Sign up

Export Citation Format

Share Document