scholarly journals Effect of Fuel Injection Control on Bio-fuel Combustion in High Speed Diesel Engine

2011 ◽  
Vol 46 (6) ◽  
pp. 902-907 ◽  
Author(s):  
Sumito Nishio ◽  
Zhide Xu ◽  
Masaru Ikame ◽  
Magoshiro Kuwabara
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Fuel Injection ◽  
Fuel Combustion ◽  
High Speed Diesel ◽  
Injection Control

Characteristics of injection of diesel fuel, rapeseed oil and their mixtures in diesel engines of various types

2021 ◽  
pp. 167-178
Author(s):  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Rapeseed Oil ◽  
High Speed ◽  
Fuel Injection ◽  
Experimental Studies ◽  
Fuel Injector ◽  
High Speed Diesel ◽  
Engine Type

The necessity of adapting diesel engines to work on vegetable oils is justified. The possibility of using rapeseed oil and its mixtures with petroleum diesel fuel as motor fuels is considered. Experimental studies of fuel injection of small high-speed diesel engine type MD-6 (1 Ch 8,0/7,5)when using diesel oil and rapeseed oil and computational studies of auto-tractor diesel engine type D-245.12 (1 ChN 11/12,5), working on blends of petroleum diesel fuel and rapeseed oil. When switching autotractor diesel engine from diesel fuel to rapeseed oil in the full-fuel mode, the mass cycle fuel supply increased by 12 %, and in the small-size high-speed diesel engine – by about 27 %. From the point of view of the flow of the working process of these diesel engines, changes in other parameters of the fuel injection process are less significant. Keywords diesel engine; petroleum diesel fuel; vegetable oil; rapeseed oil; high pressure fuel pump; fuel injector; sprayer

Detecting and Correcting Cylinder Imbalance in Direct Injection Engines

2000 ◽  
Vol 123 (3) ◽  
pp. 413-424 ◽  
Author(s):  
M. J. van Nieuwstadt ◽  
I. V. Kolmanovsky
Keyword(s):  
High Pressure ◽  
Diesel Engine ◽  
High Speed ◽  
Fuel Injection ◽  
Direct Injection ◽  
Direct Injection Engines ◽  
High Speed Diesel ◽  
On Line ◽  
Manufacturing Accuracy ◽  
Adaptation Scheme

Modern direct injection engines feature high pressure fuel injection systems that are required to control the fuel quantity very accurately. Due to limited manufacturing accuracy these systems can benefit from an on-line adaptation scheme that compensates for injector variability. Since cylinder imbalance affects many measurable signals, different sensors and algorithms can be used to equalize torque production by the cylinders. This paper compares several adaptation schemes that use different sensors. The algorithms are evaluated on a cylinder-by-cylinder simulation model of a direct injection high speed diesel engine. A proof of stability and experimental results are reported as well.

scholarly journals Effects of Fuel Injection Mode on Residual Fuel Combustion in High Speed Marine Diesel Engine

1985 ◽  
Vol 20 (5) ◽  
pp. 299-312
Author(s):  
Hideo Suetsugu ◽  
Shuhei Izumi ◽  
Masahiro Ishida ◽  
Hiromi Kondo ◽  
Shoichiro Kosuge
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Fuel Injection ◽  
Fuel Combustion ◽  
Marine Diesel Engine ◽  
Injection Mode ◽  
Marine Diesel

scholarly journals Prognostic Assessment of the Performance Parameters for the Industrial Diesel Engines Operated with Microalgae Oil

2021 ◽  
Vol 13 (11) ◽  
pp. 6482
Author(s):  
Sergejus Lebedevas ◽  
Laurencas Raslavičius
Keyword(s):  
Energy Efficiency ◽  
Diesel Engine ◽  
High Speed ◽  
Performance Parameters ◽  
Prognostic Assessment ◽  
High Speed Diesel ◽  
Microalgae Oil ◽  
The Difference ◽  
Smoke Opacity ◽  
Efficiency Indicators

A study conducted on the high-speed diesel engine (bore/stroke: 79.5/95.5 mm; 66 kW) running with microalgae oil (MAO100) and diesel fuel (D100) showed that, based on Wibe parameters (m and φz), the difference in numerical values of combustion characteristics was ~10% and, in turn, resulted in close energy efficiency indicators (ηi) for both fuels and the possibility to enhance the NOx-smoke opacity trade-off. A comparative analysis by mathematical modeling of energy and traction characteristics for the universal multi-purpose diesel engine CAT 3512B HB-SC (1200 kW, 1800 min−1) confirmed the earlier assumption: at the regimes of external speed characteristics, the difference in Pme and ηi for MAO100 and D100 did not exceeded 0.7–2.0% and 2–4%, respectively. With the refinement and development of the interim concept, the model led to the prognostic evaluation of the suitability of MAO100 as fuel for the FPT Industrial Cursor 13 engine (353 kW, 6-cylinders, common-rail) family. For the selected value of the indicated efficiency ηi = 0.48–0.49, two different combinations of φz and m parameters (φz = 60–70 degCA, m = 0.5 and φz = 60 degCA, m = 1) may be practically realized to achieve the desirable level of maximum combustion pressure Pmax = 130–150 bar (at α~2.0). When switching from diesel to MAO100, it is expected that the ηi will drop by 2–3%, however, an existing reserve in Pmax that comprises 5–7% will open up room for further optimization of energy efficiency and emission indicators.

Sign in / Sign up

Export Citation Format

Share Document