scholarly journals Verification of the Accident Ratio Curve based on Predictive Equations for the Lifespan of Pipes

2020 ◽  
Vol 25 (2) ◽  
pp. 25-33
Author(s):  
Hitone Inagaki
Author(s):  
Bahareh Nikooyeh ◽  
Nastaran Shariatzadeh ◽  
Ali Kalayi ◽  
Maliheh Zahedirad ◽  
Tirang R. Neyestani

Abstract. Some studies have reported inaccuracy of predicting basal metabolic rate (BMR) by using common equations for Asian people. Thus, this study was undertaken to develop new predictive equations for the Iranian community and also to compare their accuracy with the commonly used formulas. Anthropometric measures and thyroid function were evaluated for 267 healthy subjects (18–60 y). Indirect calorimetry (InCal) was performed only for those participants with normal thyroid function tests (n = 252). Comparison of predicted RMR (both kcal/d and kcal.kg.wt−1.d−1) using current predictive formulas and measured RMR revealed that Harris-Benedict and FAO/WHO/UNU significantly over-estimated and Mifflin-St. Jeor significantly under-estimated RMR as compared to InCal measurements. In stepwise regression analysis for developing new equations, the highest r2 (=0.89) was from a model comprising sex, height and weight. However, further analyses revealed that unlike the subjects under 30 y, the association between age and the measured RMR in subjects 30 y and plus was negative (r = −0.241, p = 0.001). As a result, two separate equations were developed for these two age groups. Over 80 percent of variations were covered by the new equations. In conclusion, there were statistical significant under- and over-estimation of RMR using common predictive equations in our subjects. Using the new equations, the accuracy of the calculated RMR increased remarkably.


1978 ◽  
Vol 46 (3) ◽  
pp. 666-673 ◽  
Author(s):  
J. C. Cordray ◽  
D. L. Huffman ◽  
J. A. McGuire
Keyword(s):  

1994 ◽  
Vol 116 (3) ◽  
pp. 267-273 ◽  
Author(s):  
H. Okamura ◽  
G. Yagawa ◽  
T. Hidaka ◽  
Y. Urabe ◽  
M. Satoh ◽  
...  

Fracture tests for the verification of WPS (warm prestressing) effect were carried out by using large flat specimens and big compact specimens with low toughness. In the case of monotonical KI increasing during cooling, the specimen broke within the scatter band of KIC. On the other hand, when KI was decreasing during cooling, the specimens did not break even if KI values were beyond the scatter band of KIC. That is, WPS effect was confirmed even for the low toughness steel like reactor pressure vessel wall under neutron irradiation. Also, KI values at fracture can be predicted by Chell’s theory. By applying WPS effect and the predictive equations for irradiation embrittlement for Japanese PWR reactor steels to the PTS integrity analysis, much more temperature margin can be expected.


Author(s):  
Binqiang Bai ◽  
Xiaodong Han ◽  
A. Allan Degen ◽  
Lizhuang Hao ◽  
Yayu Huang ◽  
...  

2002 ◽  
Vol 13 (08) ◽  
pp. 407-415 ◽  
Author(s):  
Marlene P. Bagatto ◽  
Susan D. Scollie ◽  
Richard C. Seewald ◽  
K. Shane Moodie ◽  
Brenda M. Hoover

The predicted real-ear-to-coupler difference (RECD) values currently used in pediatric hearing instrument prescription methods are based on 12-month age range categories and were derived from measures using standard acoustic immittance probe tips. Consequently, the purpose of this study was to develop normative RECD predicted values for foam/acoustic immittance tips and custom earmolds across the age continuum. To this end, RECD data were collected on 392 infants and children (141 with acoustic immittance tips, 251 with earmolds) to develop normative regression equations for use in deriving continuous age predictions of RECDs for foam/acoustic immittance tips and earmolds. Owing to the substantial between-subject variability observed in the data, the predictive equations of RECDs by age (in months) resulted in only gross estimates of RECD values (i.e., within ± 4.4 dB for 95% of acoustic immittance tip measures; within ± 5.4 dB in 95% of measures with custom ear molds) across frequency. Thus, it is concluded that the estimates derived from this study should not be used to replace the more precise individual RECD measurements. Relative to previously available normative RECD values for infants and young children, however, the estimates derived through this study provide somewhat more accurate predicted values for use under those circumstances for which individual RECD measurements cannot be made.


2021 ◽  
Vol 27 (3) ◽  
pp. 49-59
Author(s):  
Frederico Ribeiro Neto ◽  
Jefferson Rodrigues Dorneles ◽  
João Henrique Carneiro Leão Veloso ◽  
Carlos Wellington Gonçalves ◽  
Rodrigo Rodrigues Gomes Costa

Objectives: To establish predictive equations for peak torque of muscle groups with totally and partially preserved innervation in individuals with motor complete spinal cord injury (SCI), based on hand dynamometry and strength predictor variables. Methods: The cross-sectional study conducted at a rehabilitation hospital consecutively recruited 108 men and women with SCI. All participants performed maximum peak torque tests for shoulder abduction/adduction (isokinetic), trunk flexion/extension (isometric), and handgrip strength testing (hand dynamometer) to establish predictive peak torque equations. The primary outcomes were peak torque variables. Handgrip strength, age, injury level, time since injury, age at injury, body mass, height, body mass index, and physical activity level were the secondary outcomes used as strength predictor variables. Results: Handgrip strength was a predictor variable for shoulder abduction/adduction peak torque. The best predictive models for shoulder abduction/adduction peak torque exhibited R2 = 0.57 and R2 = 0.60, respectively (p ≤ .05). Injury level showed the highest significant predictive capacity for trunk flexion/extension peak torque models (R2 = 0.38 and R2 = 0.29; p ≤ .05). Conclusion: Shoulder abduction/adduction peak torque predictive equations may be an alternative for use in an accessible strength tool (hand dynamometry) to evaluate training and rehabilitation programs. Trunk flexion/extension peak torque equations exhibited moderate correlations and high standard error of the estimates and should be used with caution.


2021 ◽  
Author(s):  
Wanbo Xiao ◽  
Siqi Lu ◽  
Yanbin Wang

<p>Despite the popularity of the horizontal to vertical spectral ratio (HVSR) method in site effect studies, the origin of the H/V peaks has been controversial since this method was proposed. Many previous studies mainly focused on the explanation of the first or single peak of the H/V ratio, trying to distinguish between the two hypotheses — the S-wave resonance and ellipticity of Rayleigh wave. However, it is common both in numerical simulations and practical experiments that the H/V ratio exhibits multiple peaks, which is essential to explore the origin of the H/V peaks.</p><p>The cause for the multiple H/V peaks has not been clearly figured out, and once was simply explained as the result of multi subsurface layers. Therefore, we adopted numerical method to simulate the ambient noise in various layered half-space models and calculated the H/V ratio curves for further comparisons. The peak frequencies of the H/V curves accord well with the theoretical frequencies of S-wave resonance in two-layer models, whose frequencies only depend on the S wave velocity and the thickness of the subsurface layer. The same is true for models with varying model parameters. Besides, the theoretical formula of the S-wave resonance in multiple-layer models is proposed and then supported by numerical investigations as in the cases of two-layer models. We also extended the S-wave resonance to P-wave resonance and found that its theoretical frequencies fit well with the V/H peaks, which could be an evidence to support the S-wave resonance theory from a new perspective. By contrast, there are obvious differences between the higher orders of the H/V ratio peaks and the higher orders of Rayleigh wave ellipticity curves both in two-layer and multiple-layer models. The Rayleigh wave ellipticity curves are found to be sensitive to the Poisson’s ratio and the thickness of the subsurface layer, so the variation of the P wave velocity can affect the peak frequencies of the Rayleigh wave ellipticity curves while the H/V peaks show slight change. The Rayleigh wave ellipticity theory is thus proved to be inappropriate for the explanation of the multiple H/V peaks, while the possible effects of the Rayleigh wave on the fundamental H/V peak still cannot be excluded.</p><p>Based on the analyses above, we proposed a new evidence to support the claim that the peak frequencies of the H/V ratio curve, except the fundamental peaks, are caused by S-wave resonance. The relationship between the P-wave resonance and the V/H peaks may also find further application.</p>


Circulation ◽  
2013 ◽  
Vol 127 (suppl_12) ◽  
Author(s):  
Mary Cogswell ◽  
Chia-Yih Wang ◽  
Te-Ching Chen ◽  
Christine Pfeiffer ◽  
Paul Elliott ◽  
...  

Introduction: Reducing mean population sodium intake by ~1200 mg is projected to reduce thousands of deaths from heart disease and stroke and save billions of health care dollars annually. Twenty-four hour urine collection is recommended for assessing changes in mean population sodium intake, but can be difficult to implement. Predicting 24-hour urine sodium excretion using spot urines is not recommended due to diurnal variations in excretion. Further, sodium excretion patterns differ between black and white persons. We assessed the validity of previously published prediction equations for 24-hour sodium excretion in black and other young adults by timing of spot urine collection. Design: Of 481 adult volunteers aged 18-39 years (50% Blacks) asked to participate in a 2011 study in the Metropolitan DC area, 407 collected each urine void in a separate container for 24 hours. Four timed voids from the 24-h urine collection were selected (morning, afternoon, evening, and overnight) to use with previously published predictive equations. Predictive equations were based on one of two approaches; 1) an indirect approach using spot urine sodium-to-creatinine concentrations and predicted 24-hour creatinine excretion ( Tanaka, Kawasaki, Mage ), and 2) a direct approach using spot urine sodium, potassium, and creatinine concentrations, and age, and body mass index with separate equations by sex ( Brown ). We assessed mean differences between predicted and measured 24-hour sodium excretion (bias) and individual differences across levels of sodium excretion using Bland-Altman plots. Results: Among participants, mean measured 24-hour sodium excretion was ~3300 mg (SD ~1400 mg). Of the equations evaluated, mean bias in predicted 24-hour sodium excretion was least from Brown equations when using morning (-165 mg, 95% confidence interval [CI], -295, -36 mg), afternoon (-90 mg, 95% CI, -208, 28 mg) or evening ( -120 mg, 95% CI -230, -11 mg) spot urines. When using overnight spot urines, mean bias from Brown equations was greatest and statistically significant (-247 mg, 95% CI, -348, -151 mg). When using overnight spot urines, mean bias from Tanaka (-23 mg) or Mage (-145 mg) equations was not significant, however, when stratified by sex, mean biases were significant and in opposite directions. Among Blacks, mean biases from Brown were not significant (-167 to 122 mg) except using overnight specimens among Black females (-267 mg, 95% CI, -525, -47 mg). Across equations and time periods, Bland-Altman plots indicated significant bias at the individual level. Conclusions: Of the evaluated equations, predicted 24-hour urine sodium excretion using the Brown equations with morning, afternoon, or evening specimens may provide the least biased estimates of group mean sodium intake among young US adults. None of the equations adequately predicted individual 24-hour sodium excretion measured on the same day.


Sign in / Sign up

Export Citation Format

Share Document