scholarly journals Techno-Economic Analysis of Green Hydrogen Production System Based on Renewable Energy Sources

2020 ◽  
Vol 31 (4) ◽  
pp. 337-344
Author(s):  
JOUNGHO PARK ◽  
CHANG-HEE KIM ◽  
HYUN-SEOK CHO ◽  
SANG-KYUNG KIM ◽  
WON-CHUL CHO
2021 ◽  
Vol 5 (3) ◽  
pp. 56-61
Author(s):  
Ahmet Erhan AKAN

The decrease in fossil-based energy sources and increasing environmental problems increase the tendency to renewable energy sources day by day. The potential of renewable energy sources differs according to the region where the energy will be produced. For this reason, it is crucial to conduct a good feasibility study that deals with the selected systems from a technical and economic point of view before making an investment decision on energy conversion systems based on renewable energy sources. In this study, the most suitable equipment and capacities were investigated by examining the techno-economic analysis of a hybrid system created with wind-solar renewable energies for a detached house, which is considered off-grid, in a rural area of Tekirdağ province (40o58.7ı N, 27o30.7ı E). Investigations were carried out using the HOMER Pro (Hybrid Optimization Model for Electric Renewable) program. The wind and solar energy potential of Tekirdağ province were obtained from the NASA renewable energy resources database added to the HOMER Pro program. The daily electricity requirement of the sample house was chosen as 11.27 kWh, and the current peak electrical load was chosen as 2.39 kW. A wind turbine is connected to the AC busbars, solar collectors and battery group connected to the DC busbars, and a converter that converts energy between AC and DC busbars in the energy conversion system. In order to determine the optimum capacities of the system elements, 27486 different simulations were performed by HOMER Pro. The selection of the most suitable system among these was determined according to the lowest net present cost (NPC) value. In addition, the energy production capacities that will occur in the case of different wind speeds were also investigated. Accordingly, the system to be installed with a solar panel with a capacity of 6.25 kW, PV-MPPT with a capacity of 1 kW, 2 wind turbines with a capacity of 1 kW, 8 Lithium-ion batteries with a capacity of 6V-167 Ah, and a converter with a capacity of 2.5 kW has been determined will generate electrical energy of 5433 kWh per year. In addition, it has been determined that 61.8% of this produced energy will be obtained from solar energy and 38.2% from wind energy, and the simple payback period of the investment will be 14 years. It is thought that this study will provide valuable information to researchers and investors.


Author(s):  
Hephzibah Jose Queen ◽  
Jayakumar J. ◽  
Deepika T. J.

<p>The primary aim of this work is to feature the advantages of integrating natural source of energy from the solar and wind to the prevailing electric power systems. Two types of analysis are carried out in two test systems (standard and modified test systems) and the outcome of the test systems are compared. The two analyses are technical analysis and economic analysis. The stability of the voltage is analyzed under technical analysis and the price of energy consumed from the electric grid is calculated and analyzed under the economic analysis. Dynamic hourly load data, hourly solar radiation, hourly wind velocity, and dynamic electricity prices are considered for the standard IEEE system and modified test system (with the integration of RES). Voltage stability index (L-Index) and price of the electricity consumed from electric grid are found for standard test system and the outcome is compared with the outcome of modified test systems. MATLAB coding is done for techno-economic analysis for both test systems. It is inferred from the outcome that the integration of renewable energy sources fairly contributes to the economic benefit of the system by lowering the power purchased from the grid and enhance the stability of the system.</p>


Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 547
Author(s):  
Marco Martino ◽  
Concetta Ruocco ◽  
Eugenio Meloni ◽  
Pluton Pullumbi ◽  
Vincenzo Palma

Due to its characteristics, hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution, as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources, both of fossil and renewable origin, and with as many production processes, which can use renewable or non-renewable energy sources. To achieve carbon neutrality, the sources must necessarily be renewable, and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized, mainly focusing on renewable feedstocks, furthermore a series of relevant articles published in the last year, are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use.


2021 ◽  
Vol 9 (12) ◽  
pp. 2438
Author(s):  
Van Hong Thi Pham ◽  
Jaisoo Kim ◽  
Soonwoong Chang ◽  
Woojin Chung

It has become urgent to develop cost-effective and clean technologies for the rapid and efficient treatment of food waste leachate, caused by the rapid accumulation of food waste volume. Moreover, to face the energy crisis, and to avoid dependence on non-renewable energy sources, the investigation of new sustainable and renewable energy sources from organic waste to energy conversion is an attractive option. Green energy biohydrogen production from food waste leachate, using a microbial pathway, is one of the most efficient technologies, due to its eco-friendly nature and high energy yield. Therefore, the present study aimed to evaluate the ability of an enriched bacterial mixture, isolated from forest soil, to enhance hydrogen production from food waste leachate using biochar. A lab-scale analysis was conducted at 35 °C and at different pH values (4, no adjustment, 6, 6.5, 7, and 7.5) over a period of 15 days. The sample with the enriched bacterial mixture supplemented with an optimum of 10 g/L of biochar showed the highest performance, with a maximum hydrogen yield of 1620 mL/day on day three. The total solid and volatile solid removal rates were 78.5% and 75% after 15 days, respectively. Acetic and butyrate acids were the dominant volatile fatty acids produced during the process, as favorable metabolic pathways for accelerating hydrogen production.


Sign in / Sign up

Export Citation Format

Share Document