A new F-shaped XOR gate and its implementations as novel adder circuits based Quantum-dot cellular Automata (QCA)

Technological advancements have witnessed rapid regression of Moore’s Law within the past few years. With rising demand for higher clocking speeds, CMOS has already started exhibiting threshold limitations. Reversible Logic has emerged as a suitable alternative with near zero heat dissipation attribute. Quantum Dot Cellular Automata (QCA) has adopted the concept of reversibility and emerged as a primitive tool for quantum architecture deigns with clocking near Terra-Hertz range. A plethora of quantum architectures based on QCA cells have been proposed till date. With rise of research on digital designs based on QCA, multiple literary proposals exist which realize digital designs incorporating QCA cells. This communication proposes a Hamming Code Generator-Checker architecture design using 4-dot-2-electron QCA cells. We employ an existing QCA based XOR gate literary proposal for designing the proposed architecture. Peer comparison with literary counterparts has proven our design to fare better with a gain of 60.6% in area.

Download Full-text

Towards coplanar quantum-dot cellular automata adders based on efficient three-input XOR gate

Results in Physics ◽

10.1016/j.rinp.2017.04.005 ◽

2017 ◽

Vol 7 ◽

pp. 1389-1395 ◽

Cited By ~ 37

Author(s):

Moslem Balali ◽

Abdalhossein Rezai ◽

Haideh Balali ◽

Faranak Rabiei ◽

Saeid Emadi

Keyword(s):

Cellular Automata ◽

Quantum Dot ◽

Xor Gate ◽

Quantum Dot Cellular Automata

Download Full-text

Design of reversible Feynman and double Feynman gates in quantum-dot cellular automata nanotechnology

Circuit World ◽

10.1108/cw-08-2020-0199 ◽

2021 ◽

Vol ahead-of-print (ahead-of-print) ◽

Author(s):

Sadat Riyaz ◽

Vijay Kumar Sharma

Keyword(s):

Cellular Automata ◽

Quantum Dot ◽

Cell Count ◽

High Speed ◽

Xor Gate ◽

Content Type ◽

Quantum Dot Cellular Automata ◽

Logical Operations ◽

Feynman Gate ◽

Exclusive Or

Purpose This paper aims to propose the reversible Feynman and double Feynman gates using quantum-dot cellular automata (QCA) nanotechnology with minimum QCA cells and latency which minimizes the circuit area with the more energy efficiency. Design/methodology/approach The core aim of the QCA nanotechnology is to build the high-speed, energy efficient and as much smaller devices as possible. This brings a challenge for the designers to construct the designs that fulfill the requirements as demanded. This paper proposed a new exclusive-OR (XOR) gate which is then used to implement the logical operations of the reversible Feynman and double Feynman gates using QCA nanotechnology. Findings QCA designer-E has been used for the QCA designs and the simulation results. The proposed QCA designs have less latency, occupy less area and have lesser cell count as compared to the existing ones. Originality/value The latencies of the proposed gates are 0.25 which are improved by 50% as compared to the best available design as reported in the literature. The cell count in the proposed XOR gate is 11, while it is 14 in Feynman gate and 27 in double Feynman gate. The cell count for the proposed designs is minimum as compared to the best available designs.

Download Full-text

A novel controllable inverter and adder/subtractor in quantum-dot cellular automata using cell interaction based XOR gate

Microelectronic Engineering ◽

10.1016/j.mee.2019.111197 ◽

2020 ◽

Vol 222 ◽

pp. 111197 ◽

Cited By ~ 11

Author(s):

Nuriddin Safoev ◽

Jun-Cheol Jeon

Keyword(s):

Cellular Automata ◽

Quantum Dot ◽

Cell Interaction ◽

Xor Gate ◽

Quantum Dot Cellular Automata

Download Full-text

An Optimized Counter Design using T Flip-Flop in Quantum-Dot Cellular Automata Technology

International Journal of Recent Technology and Engineering - 2 ◽

10.35940/ijrte.b1332.0982s1119 ◽

2019 ◽

Vol 8 (2S11) ◽

pp. 2707-2716

Keyword(s):

Cellular Automata ◽

Quantum Dot ◽

Cell Count ◽

Sequential Circuits ◽

Design Tool ◽

Oxide Semiconductor ◽

Flip Flop ◽

Xor Gate ◽

Quantum Dot Cellular Automata ◽

Layout Area

Conventional CMOS technology have lot of limitations and serious challenges threat this technology when scaled to a nano-level. Several alternative technologies have been proposed as solutions to overcome limitations and challenges encountered by CMOS. Quantum dot-cellular automata (QCA) is an emerging nanotechnology for the development of logic circuits such as combinational and sequential circuits.QCA seems to be best alternative to the conventional complementary metal-oxide semiconductor (CMOS) technology.QCA is a new computing paradigm in nanotechnology that can implement digital circuits with outstanding features such as ultralow power consumption, faster switching speed and extremely density structure . In this paper , a novel area efficient and optimized QCA layout design of sequential circuit T flip flop is proposed by which the QCA layout area has reduced by 57% , cell count improved by 56% in comparison with the earlier best designs. The use of proposed T flip flop in designing sequential circuits like synchronous 2 bit up counter,3 bit up counter and 4 bit up counter has reduced the QCA layout area by 65%,64% and 68% respectively where as QCA cell count are reduced by 53%, 62% and 59%.. The sequential circuits flip flop and counters are designed using three input XOR gate and are implemented by QCA layout. The paper also present the use of proposed T flip flop designed with 3 input XOR gate in designing not only synchronous binary up counters but also in synchronous binary down counter provides a significant reduction in the hardware and complexity than the existing methods. These circuits are simulated using computer aided design tool QCA Designer 2.0.3, which is a design and simulation tool for quantum dot cellular automata. The aim is to maximize the circuit density and focus on a QCA layout that uses minimal number of cells

Download Full-text