Changing the process of prescribing to procuring lymphoedema compression garments: a service evaluation

Compression garments are the mainstay of lymphoedema treatment, yet the process of obtaining by prescription is lengthy, governed by funding, involves numerous professionals with little patient value and often involes copious inaccuracies, delays and errors. This service evaluation estimates the potential impact of changing the way compression garments are accessed from a prescription to a procurement process. The main objective was to estimate the impact and costs of altering the process within the NHS Wales setting. A service evaluation was formally supported by Medicine Management and Lymphoedema Wales Strategy Board to compare the prescription process to a new procuring route. A form was devised so that data was could be collected over 12 months by lymphoedema therapists on each compression garment issued to patients attending two lymphoedema services in NHS Wales. The data collected included information on the garment ordered, costs (prescribed compared to procured), timing between garment ordered and received plus a comparison of the processes. All non-patient identifiable data was entered into a database and comparison analysis was completed to identify any correlations between the variables collected. The project was ratified by research and development as service evaluation. There was a total of 5392 completed patient data forms were included, which when compared to the processes indicated that using a prescription route is overwhelmingly more costly than procuring. Overall costs suggest the potential for substantial savings to NHS Wales (£71.10 per patient) were statistically significant (P<0.001). Potential for improved patient outcomes was observed as garments were provided directly on appointment instead of significant delays promoting value-based healthcare.

Effectiveness of Lymphedema Prevention Programs With Compression Garment After Lymphatic Node Dissection in Breast Cancer: A Randomized Controlled Clinical Trial

Background: Patients with breast cancer who undergo axillary lymph node dissection (ALND) are at risk of developing lymphedema, which can negatively impact quality of life. Lymphedema prevention programs, which primarily consist of educational content and exercise, have been shown to reduce the incidence of lymphedema. The addition of compression garments (CG) may increase the effectiveness of these programs.Aim: We aimed to determine whether adding a compression garment to a conventional lymphedema prevention program could improve treatment effectiveness.Design: Randomized clinical trial.Methods: Seventy patients who had undergone ALND for breast cancer were randomized to receive conventional preventative therapy (control arm, n = 35) consisting of a 1-hour educational session and a 12-week exercise program or the same therapy plus upper limb CGs (experimental arm, n = 35). Patients in the experimental arm were instructed to wear the CG ≥ 8 h/day for the first 3 months after surgery and 2 h/day thereafter.Results: At 2-years, the overall incidence of lymphedema in the two groups was 12.3%, with no significant differences between the conventional and experimental arms (12.5 vs. 12.1%). In the experimental arm, the incidence of lymphedema was significantly lower (p = 0.02) in patients who used the CGs daily as recommended compared to patient who did not adhere to this treatment recommendation. Neither exercise (p = 0.518) nor education alone decreased the incidence of lymphedema. Adherence decreased over time.Conclusions: The findings of this RCT show that health education, preventive exercise programs, and patient adherence to therapeutic recommendations all play an important role in preventing lymphedema.Clinical Rehabilitation Impact: Our data demonstrated that the use of a compression garment during the first 3 months after axillary node dissection may reduce the likelihood of lymphedema in high-risk patients.

Customised pressure profiles of made-to-measure sports compression garments

The purpose of this study was to make made-to-measure compression garments that elicit pressures within and below clinical standards. The study also examined whether pressures and gradients can be replicated within and between participants’ legs, and between separate compression garment conditions. Ten males volunteered to participate. Based on three-dimensional scans of the participants’ lower body, three different made-to-measure garments were manufactured: control, symmetrical and asymmetrical. Garment pressures were assessed from the malleolus to the gluteal fold using a pressure monitoring device. A root mean squared difference analysis was used to calculate the in vivo linear graduation parameters. Linear regression showed that peak pressure at the ankle in the left and right leg were: control garment, 13.5 ± 2.3 and 12.9 ± 2.6; asymmetrical garment, 12.7 ± 2.5 and 26.3 ± 3.4; symmetrical garment, 27.7 ± 2.2 and 27.5 ± 1.6 (all mmHg, mean ± standard deviation). Pressure reduction from the ankle to the gluteal fold in the left and right leg were: control, 8.9 ± 3.5 and 7.4 ± 3.0; asymmetrical, 7.8 ± 3.9 and 21.9 ± 3.2; symmetrical, 25.0 ± 4.1 and 22.3 ± 3.6 (all mmHg, mean ± standard deviation). Made-to-measure compression garments can be made to elicit pressures within and below clinical standards, and to elicit equivalent pressures and gradients in different participants.

144 Neck Splint Fabrication

Addressing the neck during burn rehabilitation is challenging, but critical as hypertrophy and contractures can result in adverse psychosocial, functional and cosmetic outcomes. Attention to the neck early in the rehabilitation process is crucial in minimizing scarring and preventing cervical contractures. This video will demonstrate fabrication of a neck splint using silicon lined low-temperature thermoplastic material. The silicone-lined material is durable and has the capability of maintaining optimal pressure and position. It can be utilized alone or in a combination with compression garment to ensure 23 hours of pressure, which is crucial in preventing neck contractures, maintaining good cervical spine alignment and ROM, maximizing function and enhancing aesthetic appearance. Based on our clinical experience, use of silicon lined low temperature thermoplastic splint allows for early and aggressive scar management. Furthermore, patients report improved compliance with wear and ease of care for this splint.

Evaluation of the Accuracy and Practicability of Predicting Compression Garment Pressure Using Virtual Fit Technology

In this study, we evaluated the feasibility of using the virtual fit pressure map in a clothing-specific CAD program to predict pressures applied by sports compression garments by analyzing pressure prediction accuracy and process practicability. In wearer trials with whole-body compression sportswear, we measured in vivo pressures and compared them to virtual pressures recorded from the virtual fit pressure maps of the garments fitted to 13 participants’ body scan avatars. No clear correlations between virtual and in vivo pressures were identified and problems in the virtual fit process became apparent. The CAD software currently lacks a link to physical fabric, seam and component properties, which inhibits its use for predictions in new product development. By considering all simulation settings and assessing the numerical pressure prediction capability of a clothing-specific CAD program, this research provides a step forward in assessing the limitations of virtual fit for technical product development.