Behaviors of the Yukon River Sediment Plume in the Bering Sea: Relations to Glacier-Melt Discharge and Sediment Load

Sediment plumes, released to the Bering Sea from the delta front of the Yukon River, Alaska, are initiated mainly by glacier-melt sediment runoffs in the glacierized regions of the Yukon River drainage basin. The surface sediment plumes are extended around the fan-shaped Yukon River delta, which is followed by the northwestward dispersion. During continuous measurements of the Yukon River discharge and sediment load, behaviors of the sediment plumes were explored by shipboard and coastal observations in the Bering Sea. At the high river sediment load of ca. 2500 kg/s, the plume partially plunged into the sea bottom layer. The plunging probably originated in the nepheloid-layer formation from the flocculation of river-suspended sediment, of which more than 90% wt. is silt and clay (grain size d < 63 μm). In order to numerically obtain the area of the surface sediment plumes, a satellite image analysis was performed by using three near-infrared bands in MODIS/Aqua or MODIS/Terra. The plume area was significantly correlated (R2 = 0.735, p < 0.01) to the sediment load averaged for the two days with time lags of 20 days and 21 days to the date of a certain satellite image. Hence, the dispersion of plume-suspended sediment appears to be controlled by the sediment runoff events in the Yukon River rather than the northward “Alaskan Coastal Water”.

Behaviors of the Yukon River Sediment Plume in the Bering Sea: Relations to Glacier-Melt Discharge and Sediment Load

Sediment plumes, released to the Bering Sea from the delta front of the Yukon River, Alaska, are initiated mainly by glacier-melt sediment runoffs in the glacierized regions of the Yukon River drainage basin. The surface sediment plumes are extended around the fan-shaped Yukon River delta, which is followed by the northwestward dispersion. During continuous measure-ments of the Yukon River discharge and sediment load, behaviors of the sediment plumes were explored by shipboard observations in the Bering Sea offshore from the Yukon delta. At the high river sediment load of ca. 3000 kg/s, the plume partially plunged into the sea bottom layer. The plunging probably originated in the nepheloid-layer formation from the flocculation of river-suspended sediment, of which more than 90 %wt. is silt and clay (grain size d &lt; 0.063 mm). In order to numerically obtain the area of the surface sediment plumes, a satellite image analy-sis was performed by using three near-infrared bands in MODIS/Aqua or MODIS/Terra. The plume area was significantly correlated (R2=0.735, p&lt;0.01) to the sediment load averaged for the two days with time lags of 20 days and 21 days to the date of a certain satellite image. Hence, the dispersion of plume-suspended sediment appears to be controlled by the sediment runoff events in the Yukon River rather than the northward “Alaskan Coastal Water”.

Comparison of Historical Water Temperature Measurements with Landsat Analysis Ready Data Provisional Surface Temperature Estimates for the Yukon River in Alaska

Water temperature is a key element of freshwater ecological systems and a critical element within natural resource monitoring programs. In the absence of in situ measurements, remote sensing platforms can indirectly measure water temperature over time and space. The Earth Resources Observation and Science (EROS) Center has processed archived Landsat imagery into analysis ready data (ARD), including Level-2 Provisional Surface Temperature (pST) estimates derived from the Landsat 4–5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), and Landsat 8 Thermal Infrared Sensor (TIRS). We compared in situ measurements of water temperature within the Yukon River in Alaska with 52 instances of pST estimates between June 2014 and September 2020. Agreement was good with an RMSE of 2.25 °C and only a slight negative bias in the estimated mean daily water temperature of −0.47 °C. For the 52 dates compared, the average daily water temperature measured by the USGS streamgage was 11.3 °C with a standard deviation of 5.7 °C. The average daily pST estimate was 10.8 °C with a standard deviation of 6.1 °C. At least in the case of large unstratified rivers in Alaska, ARD pST can be used to infer water temperature in the absence of or in tandem with ground-based water temperature monitoring campaigns.

Snow Phenology and Hydrologic Timing in the Yukon River Basin, AK, USA

The Yukon River basin encompasses over 832,000 km2 of boreal Arctic Alaska and northwest Canada, providing a major transportation corridor and multiple natural resources to regional communities. The river seasonal hydrology is defined by a long winter frozen season and a snowmelt-driven spring flood pulse. Capabilities for accurate monitoring and forecasting of the annual spring freshet and river ice breakup (RIB) in the Yukon and other northern rivers is limited, but critical for understanding hydrologic processes related to snow, and for assessing flood-related risks to regional communities. We developed a regional snow phenology record using satellite passive microwave remote sensing to elucidate interactions between the timing of upland snowmelt and the downstream spring flood pulse and RIB in the Yukon. The seasonal snow metrics included annual Main Melt Onset Date (MMOD), Snowoff (SO) and Snowmelt Duration (SMD) derived from multifrequency (18.7 and 36.5 GHz) daily brightness temperatures and a physically-based Gradient Ratio Polarization (GRP) retrieval algorithm. The resulting snow phenology record extends over a 29-year period (1988–2016) with 6.25 km grid resolution. The MMOD retrievals showed good agreement with similar snow metrics derived from in situ weather station measurements of snowpack water equivalence (r = 0.48, bias = −3.63 days) and surface air temperatures (r = 0.69, bias = 1 day). The MMOD and SO impact on the spring freshet was investigated by comparing areal quantiles of the remotely sensed snow metrics with measured streamflow quantiles over selected sub-basins. The SO 50% quantile showed the strongest (p < 0.1) correspondence with the measured spring flood pulse at Stevens Village (r = 0.71) and Pilot (r = 0.63) river gaging stations, representing two major Yukon sub-basins. MMOD quantiles indicating 20% and 50% of a catchment under active snowmelt corresponded favorably with downstream RIB (r = 0.61) from 19 river observation stations spanning a range of Yukon sub-basins; these results also revealed a 14–27 day lag between MMOD and subsequent RIB. Together, the satellite based MMOD and SO metrics show potential value for regional monitoring and forecasting of the spring flood pulse and RIB timing in the Yukon and other boreal Arctic basins.

Most distant fastnesses: the photography of the 1887 Yukon Expedition

While there has been an increasing interest in the cultural and historical importance of 19th century survey photography, little attention has been paid to similar work conducted in Canada’s north. This paper examines the photography produced during the Geological Survey of Canada’s 1887 Yukon Expedition and its function as a tool of the Dominion government to exert control over the Yukon River Valley. By returning the photography to its functional roots and situating it within the larger documentary history of Canada’s westward expansion, this thesis argues that the images helped to do three things: prevent the abrogation of the 1825 treaty boundary between Alaska and Canada; collect visual evidence for the public record of the Yukon and Canada’s presence therein; and encourage settlement and development of the region by Canadian citizens.