scholarly journals Comparison of Historical Water Temperature Measurements with Landsat Analysis Ready Data Provisional Surface Temperature Estimates for the Yukon River in Alaska

2021 ◽  
Vol 13 (12) ◽  
pp. 2394
Author(s):  
Carson Baughman ◽  
Jeffrey Conaway
Keyword(s):  
Standard Deviation ◽  
Surface Temperature ◽  
Water Temperature ◽  
In Situ Measurements ◽  
Thematic Mapper ◽  
Landsat 8 ◽  
Yukon River ◽  
Daily Water Temperature ◽  
Daily Water

Water temperature is a key element of freshwater ecological systems and a critical element within natural resource monitoring programs. In the absence of in situ measurements, remote sensing platforms can indirectly measure water temperature over time and space. The Earth Resources Observation and Science (EROS) Center has processed archived Landsat imagery into analysis ready data (ARD), including Level-2 Provisional Surface Temperature (pST) estimates derived from the Landsat 4–5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), and Landsat 8 Thermal Infrared Sensor (TIRS). We compared in situ measurements of water temperature within the Yukon River in Alaska with 52 instances of pST estimates between June 2014 and September 2020. Agreement was good with an RMSE of 2.25 °C and only a slight negative bias in the estimated mean daily water temperature of −0.47 °C. For the 52 dates compared, the average daily water temperature measured by the USGS streamgage was 11.3 °C with a standard deviation of 5.7 °C. The average daily pST estimate was 10.8 °C with a standard deviation of 6.1 °C. At least in the case of large unstratified rivers in Alaska, ARD pST can be used to infer water temperature in the absence of or in tandem with ground-based water temperature monitoring campaigns.

scholarly journals Sensitivity Analysis and Validation of Daytime and Nighttime Land Surface Temperature Retrievals from Landsat 8 Using Different Algorithms and Emissivity Models

2020 ◽  
Vol 12 (17) ◽  
pp. 2776 ◽  
Author(s):  
Aliihsan Sekertekin ◽  
Stefania Bonafoni
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
The United States ◽  
In Situ Measurements ◽  
Surface Radiation ◽  
Radiation Budget ◽  
Sensitivity Analyses ◽  
Landsat 8

Land Surface Temperature (LST) is a substantial element indicating the relationship between the atmosphere and the land. This study aims to examine the efficiency of different LST algorithms, namely, Single Channel Algorithm (SCA), Mono Window Algorithm (MWA), and Radiative Transfer Equation (RTE), using both daytime and nighttime Landsat 8 data and in-situ measurements. Although many researchers conducted validation studies of daytime LST retrieved from Landsat 8 data, none of them considered nighttime LST retrieval and validation because of the lack of Land Surface Emissivity (LSE) data in the nighttime. Thus, in this paper, we propose using a daytime LSE image, whose acquisition is close to nighttime Thermal Infrared (TIR) data (the difference ranges from one day to four days), as an input in the algorithm for the nighttime LST retrieval. In addition to evaluating the three LST methods, we also investigated the effect of six Normalized Difference Vegetation Index (NDVI)-based LSE models in this study. Furthermore, sensitivity analyses were carried out for both in-situ measurements and LST methods for satellite data. Simultaneous ground-based LST measurements were collected from Atmospheric Radiation Measurement (ARM) and Surface Radiation Budget Network (SURFRAD) stations, located at different rural environments of the United States. Concerning the in-situ sensitivity results, the effect on LST of the uncertainty of the downwelling and upwelling radiance was almost identical in daytime and nighttime. Instead, the uncertainty effect of the broadband emissivity in the nighttime was half of the daytime. Concerning the satellite observations, the sensitivity of the LST methods to LSE proved that the variation of the LST error was smaller than daytime. The accuracy of the LST retrieval methods for daytime Landsat 8 data varied between 2.17 K Root Mean Square Error (RMSE) and 5.47 K RMSE considering all LST methods and LSE models. MWA with two different LSE models presented the best results for the daytime. Concerning the nighttime accuracy of the LST retrieval, the RMSE value ranged from 0.94 K to 3.34 K. SCA showed the best results, but MWA and RTE also provided very high accuracy. Compared to daytime, all LST retrieval methods applied to nighttime data provided highly accurate results with the different LSE models and a lower bias with respect to in-situ measurements.

Surface temperature and radiation budget of snow-covered complex terrains

2021 ◽  
Author(s):  
Alvaro Robledano ◽  
Ghislain Picard ◽  
Laurent Arnaud ◽  
Fanny Larue ◽  
Inès Ollivier
Keyword(s):  
Surface Temperature ◽  
Single Channel ◽  
Spatial Variations ◽  
In Situ Measurements ◽  
Surface Energy Budget ◽  
Radiation Budget ◽  
Atmospheric Effects ◽  
Landsat 8 ◽  
The Impact

<p>The temporal evolution of the snowpack is controlled by the surface temperature, which plays a key role in physical processes such as snowmelt. It shows large spatial variations in mountainous areas, where the illumination conditions are variable and depend on the topography. The surface energy budget is affected by the particular processes that occur in these areas, such as the modulation of the illumination by local slope and the re-illumination of the surface from surrounding slopes. These topography effects are often neglected in models, considering the surface as flat and smooth. Here we aim at estimating the surface temperature and the radiation budget of snow-covered complex terrains, in order to evaluate the role of the different processes that control their spatial variations. For this, a modelling chain is implemented to derive surface temperature from in-situ measurements. The main component is the Rough Surface Ray-Tracing (RSRT) model, based on a photon transport algorithm to quantify the impact of surface roughness in snow-covered areas. It is coupled to a surface scheme in order to estimate the radiation budget. To validate the model, we use in-situ measurements and satellite thermal observations (TIRS sensor aboard Landsat-8) in the Col du Lautaret area, in the French Alps. The satellite images are corrected from atmospheric effects with a single-channel algorithm. The results of the simulations show (i) an agreement between the simulated and observed surface temperature for a diurnal cycle in winter; (ii) the spatial variations of surface temperature are on the order of 5 to 10°C between opposed slope orientations; (iii) the agreement with satellite observations is improved when considering topography effects. It is therefore necessary to account for these effects to estimate the spatial variations of the radiation budget and surface temperature over snow-covered complex terrain. </p>

scholarly journals Comparison of Leaf Area Index, Surface Temperature, and Actual Evapotranspiration Estimated Using the METRIC Model and In Situ Measurements

Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1857 ◽  
Author(s):  
Arturo Reyes-González ◽  
Jeppe Kjaersgaard ◽  
Todd Trooien ◽  
David G. Reta-Sánchez ◽  
Juan I. Sánchez-Duarte ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Surface Temperature ◽  
Leaf Area Index ◽  
Leaf Area ◽  
In Situ Measurements ◽  
Actual Evapotranspiration ◽  
Landsat 8 ◽  
Area Index ◽  
Metric Model

The verification of remotely sensed estimates of surface variables is essential for any remote sensing study. The objective of this study was to compare leaf area index (LAI), surface temperature (Ts), and actual evapotranspiration (ETa), estimated using the remote sensing-based METRIC model and in situ measurements collected at the satellite overpass time. The study was carried out at a commercial corn field in eastern South Dakota. Six clear-sky images from Landsat 7 and Landsat 8 (Path 29, Row 29) were processed and used for the assessment. LAI and Ts were measured in situ, and ETa was estimated using an atmometer and independent crop coefficients. The results revealed good agreement between the variables measured in situ and estimated by the METRIC model. LAI showed r2 = 0.76, and RMSE = 0.59 m2 m−2, the Ts comparison had an agreement of r2 = 0.87 and RMSE 1.24 °C, and ETa presented r2 = 0.89 and RMSE = 0.71 mm day−1.

scholarly journals Development of the Statistical Model for Monitoring Salinization in the Mekong Delta of Vietnam Using Remote Sensing Data and In-Situ Measurements

Proceedings ◽  
2018 ◽  
Vol 2 (10) ◽  
pp. 565
Author(s):  
Nguyen Nguyen Vu ◽  
Le Van Trung ◽  
Tran Thi Van
Keyword(s):  
Statistical Model ◽  
Mekong Delta ◽  
Remote Sensing Data ◽  
Principal Component ◽  
Measured Data ◽  
In Situ Measurements ◽  
Landsat 8 ◽  
Spectral Bands ◽  
Component Band

This article presents the methodology for developing a statistical model for monitoring salinity intrusion in the Mekong Delta based on the integration of satellite imagery and in-situ measurements. We used Landsat-8 Operational Land Imager and Thermal Infrared Sensor (Landsat- 8 OLI and TIRS) satellite data to establish the relationship between the planetary reflectance and the ground measured data in the dry season during 2014. The three spectral bands (blue, green, red) and the principal component band were used to obtain the most suitable models. The selected model showed a good correlation with the exponential function of the principal component band and the ground measured data (R2 > 0.8). Simulation of the salinity distribution along the river shows the intrusion of a 4 g/L salt boundary from the estuary to the inner field of more than 50 km. The developed model will be an active contribution, providing managers with adaptation and response solutions suitable for intrusion in the estuary as well as the inner field of the Mekong Delta.

scholarly journals Assessing an Atmospheric Correction Algorithm for Time Series of Satellite-Based Water-Leaving Reflectance Using Match-Up Sites in Australian Coastal Waters

2021 ◽  
Vol 13 (10) ◽  
pp. 1927
Author(s):  
Fuqin Li ◽  
David Jupp ◽  
Thomas Schroeder ◽  
Stephen Sagar ◽  
Joshua Sixsmith ◽  
...  
Keyword(s):  
Coastal Waters ◽  
Atmospheric Correction ◽  
Correction Method ◽  
In Situ Measurements ◽  
Landsat 8 ◽  
Correction Algorithm ◽  
Simple Method ◽  
North East ◽  
The Impact

An atmospheric correction algorithm for medium-resolution satellite data over general water surfaces (open/coastal, estuarine and inland waters) has been assessed in Australian coastal waters. In situ measurements at four match-up sites were used with 21 Landsat 8 images acquired between 2014 and 2017. Three aerosol sources (AERONET, MODIS ocean aerosol and climatology) were used to test the impact of the selection of aerosol optical depth (AOD) and Ångström coefficient on the retrieved accuracy. The initial results showed that the satellite-derived water-leaving reflectance can have good agreement with the in situ measurements, provided that the sun glint is handled effectively. Although the AERONET aerosol data performed best, the contemporary satellite-derived aerosol information from MODIS or an aerosol climatology could also be as effective, and should be assessed with further in situ measurements. Two sun glint correction strategies were assessed for their ability to remove the glint bias. The most successful one used the average of two shortwave infrared (SWIR) bands to represent sun glint and subtracted it from each band. Using this sun glint correction method, the mean all-band error of the retrieved water-leaving reflectance at the Lucinda Jetty Coastal Observatory (LJCO) in north east Australia was close to 4% and unbiased over 14 acquisitions. A persistent bias in the other strategy was likely due to the sky radiance being non-uniform for the selected images. In regard to future options for an operational sun glint correction, the simple method may be sufficient for clear skies until a physically based method has been established.

The importance of the turbulent ship wake regime for pollutant fate and transport

2021 ◽  
Author(s):  
Amanda T. Nylund ◽  
Rickard Bensow ◽  
Mattias Liefvendahl ◽  
Arash Eslamdoost ◽  
Anders Tengberg ◽  
...  
Keyword(s):  
Fate And Transport ◽  
In Situ Measurements ◽  
Ex Situ ◽  
Landsat 8 ◽  
Turbulent Regime ◽  
Near Wake ◽  
Ship Wake ◽  
Spatiotemporal Scales ◽  
The Impact

<p>This interdisciplinary study with implications for fate and transport of pollutants from shipping, investigates the previously overlooked phenomenon of ship induced mixing. When a ship moves through water, the hull and propeller induce a long-lasting turbulent wake. Natural waters are usually stratified, and the stratification influences both the vertical and horizontal extent of the wake. The altered turbulent regime in shipping lanes governs the distribution of discharged pollutants, e.g. PAHs, metals, nutrients and non-indigenous species. The ship related pollutant load follows the trend in volumes of maritime trade, which has almost tripled since the 1980s. In heavily trafficked areas there may be one ship passage every ten minutes; today shipping constitutes a significant source of pollution.</p><p>To understand the environmental impact of shipping related pollutants, it is essential to know their fate following regional scale transport. However, previous modelling efforts assuming discharge at the surface will not adequately reflect the input values in the regional models. Therefore, it is urgent to bridge the gaps between the spatiotemporal scales from high-resolution numerical modeling of the flow hydrodynamics around the ship, mixing processes and interaction of the ship and wake with stratification, and parameterization in regional oceanographic modeling. Here this knowledge gap is addressed by combining an array of methods; in situ measurements, remote sensing and numerical flow modeling.</p><p>A bottom-mounted Acoustic Doppler Current Profiler was placed under a ship lane, for <em>in-situ</em> measurements of the vertical and temporal expansion of turbulent wakes. In addition, <em>ex-situ</em> measurements with Landsat 8 Thermal Infrared Sensor were used to estimate the longevity and spatial extent of the thermal signal from ship wakes. The computational modelling was conducted using well resolved 3D RANS modelling for the hull and the near wake (up to five ship lengths aft), a method typically used for the near wake behaviour in analysing the propulsion system. As this is not feasible to use for a far wake analysis, the predicted wake is then used as input for a 2D+time modelling for the sustained wake up to 30min after the ship passage. These results, both from measurements and numerical models, are then combined to analyse how ship-induced turbulence influence at what depth discharged pollutants will be found.</p><p>This first step to cover the mesoscales of the turbulent ship wake is necessary to assess the impact of ship related pollution. In-situ measurements show median wake depth 13.5m (max 31.5m) and median longevity 10min (max 29min). Satellite data show median thermal wake signal 13.7km (max 62.5km). A detailed simulation model will only be possible to use for the first few 100m of the ship wake, but the coupling to a simplified 2D+time modelling shows a promising potential to bridge our understanding of the impact of the ship wake on the larger scales. Our model results indicate that the natural stratification affects the distribution and retention of pollutants in the wake region. The depth of discharge and the wake turbulence characteristics will in turn affect the fate and transport of pollutants on larger spatiotemporal scales.</p>

scholarly journals RETRIEVAL OF SEA SURFACE TEMPERATURE OVER POTERAN ISLAND WATER OF INDONESIA WITH LANDSAT 8 TIRS IMAGE: A PRELIMINARY ALGORITHM

2015 ◽  
Vol XL-2/W4 ◽  
pp. 87-90 ◽  
Author(s):  
M. A. Syariz ◽  
L. M. Jaelani ◽  
L. Subehi ◽  
A. Pamungkas ◽  
E. S. Koenhardono ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Brightness Temperature ◽  
Sea Surface ◽  
Coefficient Of Determination ◽  
Landsat 8 ◽  
In Situ Data ◽  
The North ◽  
Thermal Band

The Sea Surface Temperature (SST) retrieval from satellites data Thus, it could provide SST data for a long time. Since, the algorithms of SST estimation by using Landsat 8 Thermal Band are sitedependence, we need to develop an applicable algorithm in Indonesian water. The aim of this research was to develop SST algorithms in the North Java Island Water. The data used are in-situ data measured on April 22, 2015 and also estimated brightness temperature data from Landsat 8 Thermal Band Image (band 10 and band 11). The algorithm was established using 45 data by assessing the relation of measured in-situ data and estimated brightness temperature. Then, the algorithm was validated by using another 40 points. The results showed that the good performance of the sea surface temperature algorithm with coefficient of determination (<i>R</i><sup>2</sup>) and Root Mean Square Error (<i>RMSE</i>) of 0.912 and 0.028, respectively.

scholarly journals Evaluation of Seven Atmospheric Profiles from Reanalysis and Satellite-Derived Products: Implication for Single-Channel Land Surface Temperature Retrieval

2020 ◽  
Vol 12 (5) ◽  
pp. 791 ◽  
Author(s):  
Jingjing Yang ◽  
Si-Bo Duan ◽  
Xiaoyu Zhang ◽  
Penghai Wu ◽  
Cheng Huang ◽  
...  
Keyword(s):  
Time Series ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Single Channel ◽  
Landsat 8 ◽  
Atmospheric Profiles ◽  
Atmospheric Profile

Land surface temperature (LST) is vital for studies of hydrology, ecology, climatology, and environmental monitoring. The radiative-transfer-equation-based single-channel algorithm, in conjunction with the atmospheric profile, is regarded as the most suitable one with which to produce long-term time series LST products from Landsat thermal infrared (TIR) data. In this study, the performances of seven atmospheric profiles from different sources (the MODerate-resolution Imaging Spectroradiomete atmospheric profile product (MYD07), the Atmospheric Infrared Sounder atmospheric profile product (AIRS), the European Centre for Medium-range Weather Forecasts (ECMWF), the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA2), the National Centers for Environmental Prediction (NCEP)/Global Forecasting System (GFS), NCEP/Final Operational Global Analysis (FNL), and NCEP/Department of Energy (DOE)) were comprehensively evaluated in the single-channel algorithm for LST retrieval from Landsat 8 TIR data. Results showed that when compared with the radio sounding profile downloaded from the University of Wyoming (UWYO), the worst accuracies of atmospheric parameters were obtained for the MYD07 profile. Furthermore, the root-mean-square error (RMSE) values (approximately 0.5 K) of the retrieved LST when using the ECMWF, MERRA2, NCEP/GFS, and NCEP/FNL profiles were smaller than those but greater than 0.8 K when the MYD07, AIRS, and NCEP/DOE profiles were used. Compared with the in situ LST measurements that were collected at the Hailar, Urad Front Banner, and Wuhai sites, the RMSE values of the LST that were retrieved by using the ECMWF, MERRA2, NCEP/GFS, and NCEP/FNL profiles were approximately 1.0 K. The largest discrepancy between the retrieved and in situ LST was obtained for the NCEP/DOE profile, with an RMSE value of approximately 1.5 K. The results reveal that the ECMWF, MERRA2, NCEP/GFS, and NCEP/FNL profiles have great potential to perform accurate atmospheric correction and generate long-term time series LST products from Landsat TIR data by using a single-channel algorithm.

Sign in / Sign up

Export Citation Format

Share Document