Review of modern flammability reduction methods of constructional foams

Modern methods for reducing the combustibility of novolac, epoxy and epoxy novolac oligomers used for the production of structural foams are considered. The results of studies on the application of chlorinated resins as fi re-resistant matrix, polyphosphates, intumescent carbon, and hallocyde nanotubes as fi re retardants are presented.

Test Method Development and Determination of Three-Dimensional Strength and Failure Modes of Polyvinyl Chloride Structural Foams

A comprehensive study has been conducted to develop proper test methods for accurate determination of failure strengths along different material directions of closed-cell polymer-based structural foams under different loading modes. The test methods developed are used to evaluate strengths and failure modes of commonly used H80 polyvinyl chloride (PVC) foam. The foam's out-of-plane anisotropic and in-plane isotropic cell microstructures are considered in the test methodology development. The effect of test specimen geometry on compressive deformation and failure properties is addressed, especially the aspect ratio of the specimen gauge section. Foam nonlinear constitutive relationships, strength and failure modes along both in-plane and out-of-plane (rise) directions are obtained in different loading modes. Experimental results reveal strong transversely isotropic characteristics of foam microstructure and strength properties. Compressive damage initiation and progression prior to failure are investigated in an incremental loading–unloading experiment. To evaluate foam in-plane and out-of-plane shear strengths, a scaled shear test method is also developed. Shear loading and unloading experiments are carried out to identify the causes of observed large shear damage and failure modes. The complex damage and failure modes in H80 PVC foam under different loading modes are examined, both macroscopically and microscopically.

Structural Foams of Biobased Isosorbide-Containing Copolycarbonate

Isosorbide-containing copolycarbonate (Bio-PC) is a partly biobased alternative to conventional bisphenol A (BPA) based polycarbonate (PC). Conventional PC is widely used in polymer processing technologies including thermoplastic foaming such as foam injection molding. At present, no detailed data is available concerning the foam injection molding behavior and foam properties of Bio-PC. This contribution provides first results on injection-molded foams based on isosorbide-containing PC. The structural foams were produced by using an endothermic chemical blowing agent (CBA) masterbatch and the low pressure foam injection molding method. The influence of weight reduction and blowing agent concentration on general foam properties such as density, morphology, and mechanical properties was studied. The test specimens consist of a foam core in the center and compact symmetrical shell layers on the sides. The thickness of the foam core increases with increasing weight reduction irrespective of the CBA concentration. The specific (mechanical) bending properties are significantly improved and the specific tensile properties can almost be maintained while reducing the density of the injection-molded parts.