The Recovery of Metallic Tin from an Industrial Tin-Bearing By-Product Containing Na2SO4 by Reduction Smelting Process

Tin was recovered in metal from an industrial tin-bearing byproduct containing Na2SO4 by carbothermic reduction smelting, and the effects of basicity (Na2O/SiO2), temperature, and reaction time on the recovery of tin were studied. Na2SO4 was reduced by carbon and formed into sodium silicate slag (Na2O–SiO2) in the presence of SiO2. Tin content in slag decreased with the increase of Na2O/SiO2 ratio in slag, temperature, and reaction time, but the recovery of tin was affected by volatilization of tin in high temperature and high silica region of basicity. In this study, the maximum recovery rate of tin was 94.8% at the experimental condition of 1200 °C, 2 h, and 0.55 of Na2O/SiO2 ratio. The major impurities in produced metal were Bi, Pb, Cu, Fe, and most of Bi, Pb, Cu were distributed to the metal phase, but the distribution of Fe was closely related to basicity.

Settling of Copper Phases in Lime Modified Iron Silicate Slag

Copper in discarded slag decreases the profits and copper recovery during the pyrometallurgical extraction processes. The copper losses to slag can be reduced by using a settling furnace, in which mechanically entrained copper droplets separate from the slag under the action of gravity. The settling rate of entrained droplets can be increased by modifying the slag composition and, thus, the slag properties, which are known to influence the settling rate. The knowledge of industrial CaO slag modification in a reduced iron silicate slag with a Fe/SiO2 ratio close to unity is limited. An industrial trial was thus conducted in an electric settling furnace, where the slag had been pretreated in a fuming furnace, to investigate the effect of CaO slag modification on the final slag copper content. Slag samples were collected from the ingoing and outgoing slag and from within the furnace of batches modified with CaO up to about 16 wt %. The trial was evaluated by comparing the final slag copper content and the copper recovery in the settling furnace. The results indicate that the settling becomes more efficient with the CaO modification as the final slag copper content decreased with increasing CaO content.

Influence of Process Parameters on Copper Content in Reduced Iron Silicate Slag in a Settling Furnace

During the pyrometallurgical extraction of copper, a significant fraction of this metal is lost with discard slag, which decreases profits and overall copper recovery. These copper losses can be reduced by using a settling furnace, in which suspended droplets containing copper separate from slag under the influence of gravity. An industrial trial was conducted in a settling furnace to increase the knowledge of the effect of temperature and settling time on the copper content of slag, and thus enhance the settling process to increase copper recovery. Slag samples were collected from four sample points: the ingoing and outgoing slag stream, within the furnace during settling, and the granulated slag. The chemical composition of the slag samples was analyzed and compared between batches with different temperatures and settling times. The appearance of copper and its associated phases were analyzed using a scanning electron microscope with an energy-dispersive X-ray spectroscopy detector (SEM-EDS). The results indicated that the outgoing slag copper content increased with an increase in temperature, and it was also concluded to be influenced by the attachment of copper to spinels and gas bubbles. The results indicate that regulating the settling furnace temperature to a lower interval could increase copper recovery.

On the Kinetic Behavior of Recycling Precious Metals (Au, Ag, Pt, and Pd) Through Copper Smelting Process

The recycling and recovery of precious metals from secondary materials, such as waste-printed circuit boards, are an important area of circular economy research due to the limited existing resources and increasing amount of e-waste produced by the rapid development of technology. In this study, the kinetic behavior of precious metals Au, Ag, Pt, and Pd between copper matte and iron-silicate slag was investigated at a typical flash smelting temperature of 1300 °C in both air and argon atmospheres. SEM–EDS, EPMA, and LA-ICP-MS-advanced analysis methods were used for sample characterization. The results indicate that precious metals favor the matte phase over slag, and the deportment to matte occurred swiftly within a short time after the system had reached the experimental temperature. With increasing contact times, the precious metals were distributed increasingly into the sulfide matte. The distribution coefficients, based on experimentally measured element concentrations, followed the order of palladium > platinum > gold > silver in both air and argon, and the matte acted as an efficient collector of these precious metals. The obtained results can be applied to industrial copper matte smelting processes, and they also help in upgrading CFD models to simulate the flash smelting process more precisely. Graphical Abstract