Multistage heat treatment and the development of a protective oxide-scale layer on the surface of FeCrAl sintered-metal-fibers

This study investigates the effects of Multistage Heat Treatment (MSHT) on the development of an oxide-scale layer on the surface of FeCrAl sintered-metal-fibers. The oxide-scale layer was developed using an MSHT cycle at 930 °C for 1 h, followed by 960 °C for 1 h, and finally at 990 °C for 2 h. In this study, three samples were considered: Sample 1 was kept without thermal oxidation, while Samples 2 and 3 were exposed to one and eighteen MSHT cycles. Thermo-gravimetric analyses show that the weight gain of the heat-treated sample slows with time, confirming the growth of the protective oxide-scale layer. Scanning electron microscope images, after one MSHT cycle, reveal nonuniform oxide-scale growth with platelet-like on the surface. After eighteen MSHT cycles, however, clumped particles formed on the surface of the fibers. Atomic force microscopy was utilized to study the surface topography of the fibers. The results show that MSHT increases the surface roughness, where the surface roughness of one and eighteen MSHT cycles are the same. The x-ray diffraction analyses of the baseline sample and the sample with one MSHT cycle show pattern peaks of crystalline Fe2CrAl. In contrast, the results of eighteen MSHT cycles displayed diffraction pattern peaks of crystalline Cr and stable α-Al2O3. In summary, the results of this study reveal the changing nature of the oxide-scale layer. The findings of this study form the foundation for new techniques to protect and prepare the FeCrAl fibers as a support for catalysts.

Studies on Initial Stage of High Temperature Oxidation of Fe - 9 to 12%Cr Alloys in Water Vapour Environment

Fe - 9 to 12%Cr alloys are a material for the thick sections boiler components and steam lines of a power plant. The role Fe - 9 to 12%Cr alloys is becoming more prominent in the development of a new generation of Ultra-Supercritical (USC) Power Plant due to the target operating temperature is reaching 620 °C (893 K), in 100% steam condition as well as pressure in excess of 300 bar (30 × 106 Pa). In such condition, the integrity of Fe - 9 to 12%Cr alloys relies on the oxide scale formed during the time of exposure. However due to the high temperature and water vapor condition, it is a well known fact that, the formation of oxide scale is accelerated thus depleting the structural integrity of the Fe - 9 to 12%Cr alloys over the time. Studies show that not only the formation of protective oxide scale was suppressed but the formation of non-protective oxide scale was accelerated instead. Decades of studies done by various groups around the globe has yet to have consensual on the exact mechanism of this phenomenon. Initial stage oxidation of these alloys plays great roles in hope to understand the formation of oxide scale in water vapor condition at high temperature. This paper reviews previous research works to understand the initial stage oxidation of Fe - 9 to 12%Cr alloys at high temperature in water vapor condition.