gentamicin sulfate
Recently Published Documents


TOTAL DOCUMENTS

197
(FIVE YEARS 45)

H-INDEX

23
(FIVE YEARS 5)

Author(s):  
Ladan Nejati ◽  
Nader Shakiba Maram ◽  
Amanollah Zarei Ahmady

Improving permeability and absorption of drugs are critical research challenges in pharmaceutical science. Gentamicin sulfate is an aminoglycoside antibiotic, which is very active against gram-negative bacteria; however, it has very poor bioavailability. This study aimed to prepare gentamicin nanoparticles with the intention of increased bioavailability. Accordingly, Eudragit RS-100 nanoparticles loaded with gentamicin sulfate were prepared by the double emulsification and solvent evaporation method, a proper technique for encapsulating hydrophilic molecules. Nanoparticles’ suspensions with polymer to drug ratios of 1:1 ([Formula: see text] and 2:1 ([Formula: see text]) were prepared, lyophilized and evaluated for their production yield, physicochemical properties and morphology. The mean particle size was 195.67[Formula: see text]nm and 228[Formula: see text]nm for [Formula: see text] and [Formula: see text], respectively. The formulations’ loading efficiencies were relatively high (85.73 for [Formula: see text] and 85.20 for [Formula: see text]). The nanoparticles’ surface charge (+40.5[Formula: see text]mV) was sufficient to inhibit their aggregation and facilitate the nanoparticles’ absorption through the gastrointestinal tract. The results of differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR) revealed that drug and polymer stabilized each other by physical interactions between their functional groups. Both formulations presented an initial burst drug release of nearly 20% after 30[Formula: see text]min in phosphate buffer (pH = 7.4). After 24[Formula: see text]h, [Formula: see text] did not release the drug completely, while [Formula: see text] released the whole drug. Overall, nanoparticles with proper characteristics were obtained. This study puts forward the necessity of conducting further research in order to explore the intestinal absorption of these nanoparticles and the possibility of being utilized for oral administration of gentamicin sulfate.


2021 ◽  
Vol 2 (4) ◽  
pp. 306-319
Author(s):  
Mostafa Essam Eissa ◽  
Engy Refaat Rashed ◽  
Dalia Essam Eissa

Till nowadays microbiological assay is still widely used with several antibiotics that are composed of a mixture of related active compounds. However, obtaining a reasonably valid determination of the potency is dependent on the validity and the suitability of the assay design. The present work aimed to validate an assay design of an aminoglycoside antibiotic (Gentamicin Sulfate) using a two-dose Parallel Line Model agar diffusion assay in a large 8×8 rectangular plate. All preparatory procedures were done following United States Pharmacopeia and the Inhibition Zones were measured using a digital caliper to the nearest 0.01 mm. Analysis of variance of compendial requirements of regression and parallelism were found to be satisfactorily meeting the acceptance criteria. Specificity was achieved for the product under investigation with no detectable IZ that could be found for all components except the antibiotic. The validation method showed acceptable linearity of r2≥0.98. Accuracy and precision parameters showed RSD (%)<2. All relative error value estimates were below 4%. The proposed validation design for 32×32 cm antibiotic plates yielded valid results and can be projected for the routine Quality Control analysis of the antibiotic material, especially which is incorporated into a finished medicinal dosage form. Doi: 10.28991/HIJ-2021-02-04-04 Full Text: PDF


Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6905
Author(s):  
Ewa Stodolak-Zych ◽  
Roksana Kurpanik ◽  
Ewa Dzierzkowska ◽  
Marcin Gajek ◽  
Łukasz Zych ◽  
...  

Electrospinning was used to obtain multifunctional fibrous composite materials with a matrix of poly-ɛ-caprolactone (PCL) and 2 wt.% addition of a nanofiller: montmorillonite (MMT), montmorillonite intercalated with gentamicin sulphate (MMTG) or gentamicin sulphate (G). In the first stage, the aluminosilicate gallery was modified by introducing gentamicin sulfate into it, and the effectiveness of the intercalation process was confirmed on the basis of changes in the clay particle size from 0.5 µm (for MMT) to 0.8 µm (for MMTG), an increase in the interplanar distance d001 from 12.3 Å (for MMT) to 13.9 Å (for MMTG) and altered clay grain morphology. In the second part of the experiment, the electrospinning process was carried out in which the polymer nonwovens with and without the modifier were prepared directly from dichloromethane (DCM) and N,N-dimethylformamide (DMF). The nanocomposite fibrous membranes containing montmorillonite were prepared from the same polymer solution but after homogenization with the modifier (13 wt.%). The degree of dispersion of the modifier was evaluated by average microarray analysis from observed area (EDS), which was also used to determine the intercalation of montmorillonite with gentamicin sulfate. An increase in the size of the fibers was found for the materials with the presence of the modifier, with the largest diameters measured for PCL_MMT (625 nm), and the smaller ones for PCL_MMTG (578 nm) and PCL_G (512 nm). The dispersion of MMT and MMTG in the PCL fibers was also confirmed by indirect studies such as change in mechanical properties of the nonwovens membrane, where the neat PCL nonwoven was used as a reference material. The addition of the modifier reduced the contact angle of PCL nonwovens (from 120° for PCL to 96° for PCL_G and 98° for PCL_MMTG). An approximately 10% increase in tensile strength of the nonwoven fabric with the addition of MMT compared to the neat PCL nonwoven fabric was also observed. The results of microbiological tests showed antibacterial activity of all obtained materials; however, the inhibition zones were the highest for the materials containing gentamicin sulphate, and the release time of the active substance was significantly extended for the materials with the addition of montmorillonite containing the antibiotic. The results clearly show that the electrospinning technique can be effectively used to obtain nanobiocomposite fibers with the addition of nonintercalated and intercalated montmorillonite with improved strength and increased stiffness compared to materials made only of the polymer fibers, provided that a high filler dispersion in the spinning solution is obtained.


Sign in / Sign up

Export Citation Format

Share Document