Investigating cyanogen rich Manihot esculenta efficacy for Ru phytomining and application in catalytic reactions

Effective catalytic transfer hydrogenation of furfural into furfural alcohol was accomplished using a bio-based Ru catalyst, Ru@CassCat. The catalyst was successfully produced from cassava biomass grown in Ru-rich laboratory soils.

Insights into the Kinetics Degradation of Bisphenol A by Catalytic Wet Air Oxidation with Metals Supported onto Carbon Nanospheres

Emerging pollutants are an increasing problem in wastewater globally. Bisphenol A (BPA) is one compound belonging to this group. This work proposes the study of the employment of several metal-supported (2 wt. %) carbon nanospheres (CNS) for BPA degradation by catalytic wet-air oxidation. Several techniques were used for the catalyst characterization: thermogravimetry, X-ray diffractometry (XRD), Fourier transformed infrared spectrometry (FTIR), determination of isoelectric point, elemental analysis, X-ray fluorescence (XRF), scanning electron microscopy (SEM), and N2 adsorption–desorption isotherms. Different loads of Ru in the catalyst were also tested for BPA degradation (1, 2, 5, 7, and 10%), being the first minimum value to achieve a conversion above 97% in 90 min 2 wt. % of Ru in the CNS-Ru catalyst. In the stability test with CNS-Ru and CNS-Pt, CNS-Pt demonstrated less activity and stability. Two potential models were proposed to adjust experimental data with CNS-Ru(2%) at different conditions of BPA initial concentration, catalyst mass, temperature, and pressure of the reaction. Both models showed a high determination coefficient (R2 > 0.98). Finally, the efficiency of CNS-Ru and CNS-Pt was tested in a real hospital wastewater matrix obtaining better results the CNS-Pt(2%) catalyst.

Ru Catalyst Encapsulated into the Pores of MIL-101 MOF: Direct Visualization by TEM

Ru catalyst nanoparticles were encapsulated into the pores of a Cr-based metal-organic framework (MOF)—MIL-101. The obtained material, as well as the non-loaded MIL-101, were investigated down to the atomic scale by annular dark-field scanning transmission electron microscopy using low dose conditions and fast image acquisition. The results directly show that the used wet chemistry loading approach is well-fitted for the accurate embedding of the individual catalyst nanoparticles into the cages of the MIL-101. The MIL-101 host material remains crystalline after the loading procedure, and the encapsulated Ru nanoparticles have a metallic nature. Annular dark field scanning transmission electron microscopy, combined with EDX mapping, is a perfect tool to directly characterize both the embedded nanoparticles and the loaded nanoscale MOFs. The resulting nanostructure of the material is promising because the Ru nanoparticles hosted in the MIL-101 pores are prevented from agglomeration—the stability and lifetime of the catalyst could be improved.