Hybrid Metal-Dielectric-Metal Sandwiches for SERS Applications

The development of efficient plasmonic nanostructures with controlled and reproducible surface-enhanced Raman spectroscopy (SERS) signals is an important task for the evolution of ultrasensitive sensor-related methods. One of the methods to improving the characteristics of nanostructures is the development of hybrid structures that include several types of materials. Here, we experimentally investigate ultrathin gold films (3–9 nm) near the percolation threshold on Si/Au/SiO2 and Si/Au/SiO2/graphene multilayer structures. The occurring field enhanced (FE) effects were characterized by a recording of SERS signal from Crystal Violet dye. In this geometry, the overall FE principally benefits from the combination of two mechanisms. The first one is associated with plasmon excitation in Au clusters located closest to each other. The second is due to the gap plasmons’ excitation in a thin dielectric layer between the mirror and corrugated gold layers. Experimentally obtained SERS signals from sandwiched structures fabricated with Au film of 100 nm as a reflector, dielectric SiO2 spacer of 50 nm and ultrathin gold atop could reach SERS enhancements of up to around seven times relative to gold films near the percolation threshold deposited on a standard glass substrate. The close contiguity of the analyte to graphene and nanostructured Au efficiently quenches the fluorescent background of the model compound. The obtained result shows that the strategy of combining ultrathin nano-island gold films near the percolation threshold with gap plasmon resonances is promising for the design of highly efficient SERS substrates for potential applications in ultrasensitive Raman detection.

Synthesis, Characterization and Photocatalytic Performance of Calcined ZnCr-Layered Double Hydroxides

The development of new materials for performing photocatalytic processes to remove contaminants is an interesting and important research line due to the ever-increasing number of contaminants on our planet. In this sense, we developed a layered double hydroxide material based on Zn and Cr, which was transformed into the corresponding oxide by heat treatment at 500 °C. Both materials were widely characterized for their elemental composition, and structural, morphological, optical and textural properties using several experimental techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, scanning and transmission electron microscopy, Fourier transform infrared spectroscopy, UV-vis spectroscopy and physisorption techniques. In addition, the photocatalytic activity of both materials was analysed. The calcined one showed interesting photocatalytic activity in photodegradation tests using crystal violet dye. The operational parameters for the photocatalytic process using the calcined material were optimised, considering the pH, the initial concentration of the dye, the catalyst load, and the regeneration of the catalyst. The catalyst showed good photocatalytic activity, reaching a degradation of 100% in the optimised conditions and showing good performance after five photodegradation cycles.

Hydrothermal Synthesis and Photocatalytic Performance of Barium Carbonate/tin Dioxide Nanoparticles

Background: Crystal violet dye is stable and difficult to be biodegraded owing to the existence of the multiple aromatic rings of the crystal violet molecules. Removing crystal violet dye from the wastewater is a major challenge. Objective: The aim of the research is to synthesize barium carbonate/tin dioxide nanoparticles and investigate the photocatalytic performance for the degradation of crystal violet. Methods: Barium carbonate/tin dioxide nanoparticles were synthesized via a facile hydrothermal route without any surfactants. The crystal structure, micro-morphology, size and optical performance of the barium carbonate/tin dioxide nanoparticles were investigated by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy and solid ultraviolet-visible diffuse reflectance spectrum. Results : The size of the barium carbonate/tin dioxide nanoparticles is 20 nm to 200 nm with the band gap of 3.71 eV. The photocatalytic activity of the barium carbonate/tin dioxide nanoparticles was measured by the photocatalytic degradation of crystal violet. The crystal violet degradation efficiency reaches 92.1% with the ultraviolet-visible irradiation time of 8 h using 10 mg barium carbonate/tin dioxide nanoparticles. The crystal violet degradation ratio increases to 96.1% when the dosage of the barium carbonate/tin dioxide nanoparticles increases to 20 mg/10 mL crystal violet dye solution. Active species capture photocatalytic experiments showed that the holes, hydroxyl radicals and superoxide ion radicals are the main active species. Reusability experiments displayed that the barium carbonate/tin dioxide nanoparticles are stable for the crystal violet dye degradation. Conclusion: The barium carbonate/tin dioxide nanoparticles show good photocatalytic performance toward crystal violet under ultraviolet light irradiation.