Boomeyong: Embedding Yoyo within Boomerang and its Applications to Key Recovery Attacks on AES and Pholkos

This work investigates a generic way of combining two very effective and well-studied cryptanalytic tools, proposed almost 18 years apart, namely the boomerang attack introduced by Wagner in FSE 1999 and the yoyo attack by Ronjom et al. in Asiacrypt 2017. In doing so, the s-box switch and ladder switch techniques are leveraged to embed a yoyo trail inside a boomerang trail. As an immediate application, a 6-round key recovery attack on AES-128 is mounted with time complexity of 278. A 10-round key recovery attack on recently introduced AES-based tweakable block cipher Pholkos is also furnished to demonstrate the applicability of the new technique on AES-like constructions. The results on AES are experimentally verified by applying and implementing them on a small scale variant of AES. We provide arguments that draw a relation between the proposed strategy with the retracing boomerang attack devised in Eurocrypt 2020. To the best of our knowledge, this is the first attempt to merge the yoyo and boomerang techniques to analyze SPN ciphers and warrants further attention as it has the potential of becoming an important cryptanalysis tool.

On the boomerang uniformity of some permutation polynomials

The boomerang attack, introduced by Wagner in 1999, is a cryptanalysis technique against block ciphers based on differential cryptanalysis. In particular it takes into consideration two differentials, one for the upper part of the cipher and one for the lower part, and it exploits the dependency of these two differentials. At Eurocrypt’18, Cid et al. introduced a new tool, called the Boomerang Connectivity Table (BCT), that permits to simplify this analysis. Next, Boura and Canteaut introduced an important parameter for cryptographic S-boxes called boomerang uniformity, that is the maximum value in the BCT. Very recently, the boomerang uniformity of some classes of permutations (in particular quadratic functions) have been studied by Li, Qu, Sun and Li, and by Mesnager, Tang and Xiong. In this paper we further study the boomerang uniformity of some non-quadratic differentially 4-uniform functions. In particular, we consider the case of the Bracken-Leander cubic function and three classes of 4-uniform functions constructed by Li, Wang and Yu, obtained from modifying the inverse functions.

New Related-Tweakey Boomerang and Rectangle Attacks on Deoxys-BC Including BDT Effect

In the CAESAR competition, Deoxys-I and Deoxys-II are two important authenticated encryption schemes submitted by Jean et al. Recently, Deoxys-II together with Ascon, ACORN, AEGIS-128, OCB and COLM have been selected as the final CAESAR portfolio. Notably, Deoxys-II is also the primary choice for the use case “Defense in depth”. However, Deoxys-I remains to be one of the third-round candidates of the CAESAR competition. Both Deoxys-I and Deoxys-II adopt Deoxys-BC-256 and Deoxys-BC-384 as their internal tweakable block ciphers.In this paper, we investigate the security of round-reduced Deoxys-BC-256/-384 and Deoxys-I against the related-tweakey boomerang and rectangle attacks with some new boomerang distinguishers. For Deoxys-BC-256, we present 10-round related-tweakey boomerang and rectangle attacks for the popular setting (|tweak|, |key|) = (128, 128), which reach one more round than the previous attacks in this setting. Moreover, an 11-round related-tweakey rectangle attack on Deoxys-BC-256 is given for the first time. We also put forward a 13-round related-tweakey boomerang attack in the popular setting (|tweak|, |key|) = (128, 256) for Deoxys-BC-384, while the previous attacks in this setting only work for 12 rounds at most. In addition, the first 14-round relatedtweakey rectangle attack on Deoxys-BC-384 is given when (|tweak| < 98, |key| > 286), that attacks one more round than before. Besides, we give the first 10-round rectangle attack on the authenticated encryption mode Deoxys-I-128-128 with one more round than before, and we also reduce the complexity of the related-tweakey rectangle attack on 12-round Deoxys-I-256-128 by a factor of 228. Our attacks can not be applied to (round-reduced) Deoxys-II.

Boomerang Switch in Multiple Rounds. Application to AES Variants and Deoxys

The boomerang attack is a cryptanalysis technique that allows an attacker to concatenate two short differential characteristics. Several research results (ladder switch, S-box switch, sandwich attack, Boomerang Connectivity Table (BCT), ...) showed that the dependency between these two characteristics at the switching round can have a significant impact on the complexity of the attack, or even potentially invalidate it. In this paper, we revisit the issue of boomerang switching effect, and exploit it in the case where multiple rounds are involved. To support our analysis, we propose a tool called Boomerang Difference Table (BDT), which can be seen as an improvement of the BCT and allows a systematic evaluation of the boomerang switch through multiple rounds. In order to illustrate the power of this technique, we propose a new related-key attack on 10-round AES-256 which requires only 2 simple related-keys and 275 computations. This is a much more realistic scenario than the state-of-the-art 10-round AES-256 attacks, where subkey oracles, or several related-keys and high computational power is needed. Furthermore, we also provide improved attacks against full AES-192 and reduced-round Deoxys.

Boomerang Connectivity Table Revisited. Application to SKINNY and AES

The boomerang attack is a variant of differential cryptanalysis which regards a block cipher E as the composition of two sub-ciphers, i.e., E = E1 o E0, and which constructs distinguishers for E with probability p2q2 by combining differential trails for E0 and E1 with probability p and q respectively. However, the validity of this attack relies on the dependency between the two differential trails. Murphy has shown cases where probabilities calculated by p2q2 turn out to be zero, while techniques such as boomerang switches proposed by Biryukov and Khovratovich give rise to probabilities greater than p2q2. To formalize such dependency to obtain a more accurate estimation of the probability of the distinguisher, Dunkelman et al. proposed the sandwich framework that regards E as Ẽ1 o Em o Ẽ0, where the dependency between the two differential trails is handled by a careful analysis of the probability of the middle part Em. Recently, Cid et al. proposed the Boomerang Connectivity Table (BCT) which unifies the previous switch techniques and incompatibility together and evaluates the probability of Em theoretically when Em is composed of a single S-box layer. In this paper, we revisit the BCT and propose a generalized framework which is able to identify the actual boundaries of Em which contains dependency of the two differential trails and systematically evaluate the probability of Em with any number of rounds. To demonstrate the power of this new framework, we apply it to two block ciphers SKINNY and AES. In the application to SKINNY, the probabilities of four boomerang distinguishers are re-evaluated. It turns out that Em involves5 or 6 rounds and the probabilities of the full distinguishers are much higher than previously evaluated. In the application to AES, the new framework is used to exclude incompatibility and find high probability distinguishers of AES-128 under the related-subkey setting. As a result, a 6-round distinguisher with probability 2−109.42 is constructed. Lastly, we discuss the relation between the dependency of two differential trails in boomerang distinguishers and the properties of components of the cipher.

On the Boomerang Uniformity of Cryptographic Sboxes

The boomerang attack is a cryptanalysis technique against block ciphers which combines two differentials for the upper part and the lower part of the cipher. The dependency between these two differentials then highly affects the complexity of the attack and all its variants. Recently, Cid et al. introduced at Eurocrypt’18 a new tool, called the Boomerang Connectivity Table (BCT) that permits to simplify this complexity analysis, by storing and unifying the different switching probabilities of the cipher’s Sbox in one table. In this seminal paper a brief analysis of the properties of these tables is provided and some open questions are raised. It is being asked in particular whether Sboxes with optimal BCTs exist for even dimensions, where optimal means that the maximal value in the BCT equals the lowest known differential uniformity. When the dimension is even and differs from 6, such optimal Sboxes correspond to permutations such that the maximal value in their DDT and in their BCT equals 4 (unless APN permutations for such dimensions exist). We provide in this work a more in-depth analysis of boomerang connectivity tables, by studying more closely differentially 4-uniform Sboxes. We first completely characterize the BCT of all differentially 4-uniform permutations of 4 bits and then study these objects for some cryptographically relevant families of Sboxes, as the inverse function and quadratic permutations. These two families provide us with the first examples of differentially 4-uniform Sboxes optimal against boomerang attacks for an even number of variables, answering the above open question.

Cryptanalysis on SDDO-Based BM123-64 Designs Suitable for Various IoT Application Targets

BM123-64 block cipher, which was proposed by Minh, N.H. and Bac, D.T. in 2014, was designed for high speed communication applications factors. It was constructed in hybrid controlled substitution–permutation network (CSPN) models with two types of basic controlled elements (CE) in distinctive designs. This cipher is based on switchable data-dependent operations (SDDO) and covers dependent-operations suitable for efficient primitive approaches for cipher constructions that can generate key schedule in a simple way. The BM123-64 cipher has advantages including high applicability, flexibility, and portability with different algorithm selection for various application targets with internet of things (IoT) as well as secure protection against common types of attacks, for instance, differential attacks and linear attacks. However, in this paper, we propose methods to possibly exploit the BM123-64 structure using related-key attacks. We have constructed a high probability related-key differential characteristics (DCs) on a full eight rounds of BM123-64 cipher. The related-key amplified boomerang attack is then proposed on all three different cases of operation-specific designs with effective results in complexity of data and time consumptions. This study can be considered as the first cryptographic results on BM123-64 cipher.