ash leaching
Recently Published Documents


TOTAL DOCUMENTS

36
(FIVE YEARS 5)

H-INDEX

13
(FIVE YEARS 1)

Water ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2402
Author(s):  
Carl Swindle ◽  
Parker Shankin-Clarke ◽  
Matthew Meyerhof ◽  
Jean Carlson ◽  
John Melack

Wildfires can change ecosystems by altering solutes in streams. We examined major cations in streams draining a chaparral-dominated watershed in the Santa Ynez Mountains (California, USA) following a wildfire that burned 75 km2 from July 8 to October 5, 2017. We identified changes in solute concentrations, and postulated a relation between these changes and ash leached by rainwater following the wildfire. Collectively, K+ leached from ash samples exceeded that of all other major cations combined. After the wildfire, the concentrations of all major cations increased in stream water sampled near the fire perimeter following the first storm of the season: K+ increased 12-fold, Na+ and Ca2+ increased 1.4-fold, and Mg2+ increased 1.6-fold. Our results suggested that the 12-fold increase in K+ in stream water resulted from K+ leached from ash in the fire scar. Both C and N were measured in the ash samples. The low N content of the ash indicated either high volatilization of N relative to C occurred, or burned material contained less N.


2021 ◽  
Vol 140 (1) ◽  
pp. 1-22
Author(s):  
Edda E. Falcone ◽  
Cinzia Federico ◽  
Sergio Bellomo ◽  
Lorenzo Brusca ◽  
Walter D'Alessandro ◽  
...  

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 146
Author(s):  
Mirjam Wolffers ◽  
Gisela Weibel ◽  
Urs Eggenberger

In Switzerland, waste wood fly ash (WWFA) must be treated before deposition on landfills due to its high pollutant load (Cr(VI) and heavy metals). Acid fly ash leaching, the process used for heavy metal recovery from municipal solid waste incineration fly ash (MSWIFA), represents a possible treatment for heavy metal depletion and Cr(VI) reduction in WWFA. The co-processing of WWFA with MSWIFA during acid fly ash leaching was investigated in laboratory- and industrial-scale experiments with different setups. Of interest were the effects on heavy metal recovery efficiency, the successful outcome of Cr(VI) reduction and consumption of neutralizing chemicals (HCl, H2O2). Detailed chemical and mineralogical characterization of two WWFA types and MSWIFA showed that MSWIFA has higher concentrations in potentially harmful elements than WWFA. However, both WWFA types showed high concentrations in Pb and Cr(VI), and therefore need treatment prior to deposition. Depending on the waste wood proportion and quality, WWFA showed chemical and mineralogical differences that affect leaching behavior. In all experimental setups, successful Cr(VI) reduction was achieved. However, WWFA showed higher consumption of HCl and H2O2, the latter resulting in a particularly negative effect on the recovery of Pb and Cu. Thus, co-processing of smaller WWFA portions could be expedient in order to diminish the negative effects of Pb and Cu recovery.


2018 ◽  
Vol 189 ◽  
pp. 155-168 ◽  
Author(s):  
Ke Yin ◽  
Wei-Ping Chan ◽  
Xiaomin Dou ◽  
Grzegorz Lisak ◽  
Victor Wei-Chung Chang

2018 ◽  
Vol 163 ◽  
pp. 63-72 ◽  
Author(s):  
Yuchi Chen ◽  
Teng Wang ◽  
Min Zhou ◽  
Haobo Hou ◽  
Yongjie Xue ◽  
...  

TAPPI Journal ◽  
2017 ◽  
Vol 16 (7) ◽  
pp. 383-391
Author(s):  
CARLA CÉLIA ROSA MEDEIROS ◽  
FLÁVIA AZEVEDO SILVA ◽  
SAULO GODOY PIGNATON ◽  
ESTANISLAU VICTOR ZUTAUTAS ◽  
KLEVERSON FIGUEIREDO

There are many points in a kraft mill where the alkaline compounds are purged from the process. Several effluents, solid waste, and air emissions contain alkali, which leads to the necessity of chemical makeups to maintain the liquor balance. The main loss of alkali at the Veracel mill is present in the wastewater from the recovery boiler; more precisely, it is from the ash leaching system, which represents 80% of the total losses. To minimize the alkaline losses while keeping the chloride level in the recovery cycle under control, a project was developed at Veracel. Key actions were taken by adjusting the control loops of the ash leaching system, mainly on the slurry density and purge control. These adjustments led to a decrease in alkali losses and to an increase of treated ash, and kept the chloride level of the recovery boiler dust at 2.6%.


2016 ◽  
Vol 23 (14) ◽  
pp. 14338-14353 ◽  
Author(s):  
J. Cabré ◽  
M. Aulinas ◽  
M. Rejas ◽  
J. L. Fernandez-Turiel

Sign in / Sign up

Export Citation Format

Share Document