Assessing the Electrochemical Performance of Different Nanostructured CeO2 Samples as Anodes for Lithium-Ion Batteries

In this work, six samples of CeO2 are successfully prepared by diverse synthesis routes leading to different microstructures regarding both morphology and particle size. The structural and microstructural characteristics presented by the samples and their influence on the electrochemical response of the prepared anodes are analyzed. In particular, the Ce-CMK3 sample, synthesized from a mesoporous carbon obtained through a CMK3 silica template, displays an enhanced electrochemical response. Thus, capacity values of ~220 mA h g−1 are obtained at a current rate of 0.155 A g−1 after 50 cycles and an excellent cyclability at intermediate current densities. On the other hand, it is observed that the capacity values are satisfactorily recovered at 0.31 A g−1, displaying ~100 mA h g−1 after 550 cycles and efficiencies close to 100%. The electrochemical performance is interpreted considering the microstructural peculiarities of this anode, which are deeply analyzed.

Charge Storage and Solar Rechargeable Battery Devices Based on Electrodes Electrochemically Modified with Conducting Polymer Nanowires

In this work, the use of nanostructured conducting polymer deposits on energy-storing devices is described. The cathode and the anode are electrochemically modified with nanowires of polypyrrole and poly(3,4-ethylenedioxythiophene), respectively, prepared after the use of a mesoporous silica template. The effect of aqueous or ionic liquid medium is assayed during battery characterization studies. The nanostructured device greatly surpasses the performance of the bulk configuration in terms of specific capacity, energy, and power. Moreover, compared with devices found in the literature with similar designs, the nanostructured device prepared here shows better battery characteristics, including cyclability. Finally, considering the semi-conducting properties of the components, the device was adapted to the design of a solar-rechargeable device by the inclusion of a titanium oxide layer and cis-bis(isothiocyanate)-bis(2,2′-bipyridyl-4,4′-dicarboxylate) ruthenium (II) dye. The device proved that the nanostructured design is also appropriate for the implementation of solar-rechargeable battery, although its performance still requires further optimization.

Synthesis of Finely Controllable Sizes of Au Nanoparticles on a Silica Template and Their Nanozyme Properties

The precise synthesis of fine-sized nanoparticles is critical for realizing the advantages of nanoparticles for various applications. We developed a technique for preparing finely controllable sizes of gold nanoparticles (Au NPs) on a silica template, using the seed-mediated growth and interval dropping methods. These Au NPs, embedded on silica nanospheres (SiO2@Au NPs), possess peroxidase-like activity as nanozymes and have several advantages over other nanoparticle-based nanozymes. We confirmed their peroxidase activity; in addition, factors affecting the activity were investigated by varying the reaction conditions, such as concentrations of tetramethyl benzidine and H2O2, pH, particle amount, reaction time, and termination time. We found that SiO2@Au NPs are highly stable under long-term storage and reusable for five cycles. Our study, therefore, provides a novel method for controlling the properties of nanoparticles and for developing nanoparticle-based nanozymes.

Synthesis of Finely Controllable Sizes of Au Nanoparticles on a Silica Template and Their Nanozyme Properties

The precise synthesis of fine-sized nanoparticles is critical for realizing the advantages of nanoparticles for various applications. We developed a technique for preparing finely controllable sizes of gold nanoparticles (Au NPs) on a silica template using the seed-mediated growth and interval dropping methods. These Au NPs, embedded on silica nanospheres (SiO2@Au NPs), possess peroxidase-like activity as nanozymes and have several advantages over other nanoparticle-based nanozymes. We confirmed their peroxidase activity; in addition, factors affecting the activity were investigated by varying the reaction conditions such as concentrations of tetramethyl benzidine and H2O2, pH, particle amount, reaction time, and termination time. We found that SiO2@Au NPs are highly stable under long-term storage and reusable for five cycles. Our study, therefore, provides a novel method for controlling the properties of nanoparticles and for developing nanoparticle-based nanozymes.

Nickel Nanoparticles Immobilized on a Porous Triazine-Thiourea-Sulfonamide as an Efficient Heterogeneous Catalyst for Reduction of Carbonyl Compounds

In order to investigate the role of silica template, polymers and nickel nanoparticles on the reduction of aldehydes/ketones, a novel porous triazine-thiourea-sulfonamide polymeric organic support (TTSA) was prepared via in-situ polymerization of melamine (1,3,5-triazine-2,4,6-triamine), thiourea and benzene-1,3-disulfonyl chloride in the presence of silica nanoparticles as a template led to the synthesize silica TTSA nanocomposite. Next, after removal of the template, the nanocomposite was transformed into mesoporous poly triazine-thiourea-sulfonamide. Ni nanoparticles (Ni NPs) were then decorated on the designed mesoporous polymer support and the resulting TTSA@Ni NPs nanospheres were employed as heterogeneous catalyst in the construction of alchohols from reduction of aldehydes/ketones using formic acid/triethyl amine as a reducing agent in water as solvent. The catalyst is low-cost, non-toxic, and can be reused for several catalytic cycles without decreasing the activity.