profile position
Recently Published Documents


TOTAL DOCUMENTS

19
(FIVE YEARS 2)

H-INDEX

5
(FIVE YEARS 0)

2022 ◽  
Vol 2148 (1) ◽  
pp. 012007
Author(s):  
Mingwen Chi

Abstract In this paper, the technology of profile generation based on 3D model is studied. The main steps are as follows: (1) the location where the profile needs to be generated in 3D model design; (2) Using 3D data cutting technology to realize the generation of geological lines in profile; (3) Read the basic exploration data related to profile position in the database; (4) According to the data generated in the first three steps, the cross-section is automatically drawn after data coordinate transformation. The above method can quickly generate the geological profile of any location according to the 3D geological model, which is helpful for geological analysis and provides reference data for engineering design.


2019 ◽  
Vol 28 (3) ◽  
pp. 417-431
Author(s):  
Yuriy I. Gritsan ◽  
Olga M. Kunakh ◽  
Julia J. Dubinina ◽  
Vadim I. Kotsun ◽  
Yuriy I. Tkalich

In the present investigation catena approaches to assess the landscape diversity of the “Dnipro-Orilsky” natural reserve was developed. Catena which lies in the reserve embraces flood and arena biogeocoenoses. The research was performed during the 2014– 2018. The two profiles were made at the “Dnipro-Orilsky” natural reserve within which main geomorphological landscape elements are presented. There are 29 sampling polygons within these p rofiles. The soil profile description, vegetation investigation, soil and soil animals quantitative assessment was carried out in each of them. In this publication we presented the results of sampling polygons 1–4, 25 and 26. The profile 1 best reflects the traditional view of catena: it goes from the highest places of the sand terrace (arena) to the lowest place (floodplain). But relief diversity is increased by the availability of small river Protich. It floodplain provides an alternative transit and accumulation gradient. It should be noted that the main part of the main slope profile does not fully meet the transit regime, as compiled by sandy soils, which are char- acterized by high filtration capacity. Therefore, the slope profile position is largely corresponded to eluvial regimes. The accumulative part of the profile which corresponds to the floodplain of Dnipro river is significantly influenced by impact of the flood factor than the accumulative part of the profile which corresponds to the floodplain of Protich river. The soils within floodplain of Protich river have more quantity of clay. Clay soils are characterized by capillary properties, as soil salinization is common in the floodplain of Protich river. Alternative profile 2 includes Orlov valley. This element of the landscape is accumulative, but not affected by flood factor. In the biogeocenotic context catena sampling points were considered as being composed of pedocatena, phytocatena and zoocatena. The biogeocenotic approach is the chain that connects the landscape structure, the diversity of soil cover, and diversities of the plant and animal communities. The functional, spatial and temporal properties of ecosystems in landscape context can be expressed by catena. The biogeocoenosis concept is a basis for integration of the pedocatena, phytocatena and zoocatena. Catena approach is the framework for a monitoring system landscape diversity both at the level of individual component biogeocoenosis (edaphotop, phytocenosis, and zoocenosis) and biogeocoenosis level in terms of its horizontal and vertical structure and at the landscape level as a whole intercon- nected system. The traditional idea of catena as a set of eluvial, transit and accumulative positions in a complex and diverse landscape is not able to cover the most important environmental gradients modes. The complexity of the landscape is due to relief diversity and the effects of anthropogenic transformation biogeocenotic cover. Catena therefore can be seen as a multilevel hierarchical system of the biogeocenotic polygons needed to consider the diversity of physiographic conditions and anthropogenic gradients.


Author(s):  
Wei Li ◽  
Daniel A. McAdams

As the advantages of foldable or deployable structures are being discovered, research into origami engineering has attracted more focus from both artists and engineers. With the aid of modern computer techniques, some computational origami design methods have been developed. Most of these methods focus on the problem of origami crease pattern design—the problem of determining a crease pattern to realize a specified origami final shape, but do not provide computational solutions to actually developing a shape that meets some design performance criteria. This paper presents a design method that includes the computational design of the finished shape as well as the crease pattern. The origami shape will be designed to satisfy geometric, functional, and foldability requirements. This design method is named computational evolutionary embryogeny for optimal origami design (CEEFOOD), which is an extension of the genetic algorithm (GA) and an original CEE. Unlike existing origami crease pattern design methods that adopt deductive logic, CEEFOOD implements an abductive approach to progressively evolve an optimal design. This paper presents how CEEFOOD—as a member of the GA family—determines the genetic representation (genotype) of candidate solutions, the formulation of the objective function, and the design of evolutionary operators. This paper gives an origami design problem, which has requirements on the folded-state profile, position of center of mass, and number of creases. Several solutions derived by CEEFOOD are listed and compared to highlight the effectiveness of this abductive design method.


Author(s):  
Wei Li ◽  
Daniel A. McAdams

As the advantages of foldable or deployable structures are being discovered, research into origami engineering has attracted more focus from both artists and engineers. With the aid of modern computer techniques, some computational origami design methods have been developed. Most of these methods focus on the problem of origami crease pattern design — the problem of determining a crease pattern to realize a specified origami final shape, but don’t provide computational solutions to actually developing a shape that meets some design performance criteria. This paper presents a design method that includes the computational design of the finished shape as well as the crease pattern. The origami shape will be designed to satisfy geometric, functional, and foldability requirements. This design method is named computational evolutionary embryogeny for optimal origami design (CEEFOOD), which is an extension of the genetic algorithm (GA) and an original computational evolutionary embryogeny (CEE). Unlike existing origami crease pattern design methods that adopt deductive logic, CEEFOOD implements an abductive approach to progressively evolve an optimal design. This paper presents how CEEFOOD — as a member of the GA family — determines the genetic representation (genotype) of candidate solutions, the formulation of the objective function, and the design of evolutionary operators. This paper gives an origami design problem, which has requirements on the folded-state profile, position of center of mass, and number of creases. Several solutions derived by CEEFOOD are listed and compared to highlight the effectiveness of this abductive design method.


2012 ◽  
Vol 50 (5) ◽  
pp. 815-824 ◽  
Author(s):  
Hoon Cho ◽  
Yu-Mi Choi ◽  
Jin-Hong Lee ◽  
Im-Pyo Cho ◽  
Myung-Wan Han

2012 ◽  
Vol 36 (4) ◽  
pp. 329-334 ◽  
Author(s):  
SY Park ◽  
SC Choi ◽  
BJ Choi ◽  
SJ Kim ◽  
JH Park

Congenitally missing teeth are one of the most common dental anomalies. When permanent teeth are absent, various problems can occur. It is important to consider the facial profile, position of the incisor teeth, skeletal and dental development, and available dental space before planning treatment. Possible treatment methods include preserving and retaining the deciduous tooth, replacing the missing tooth with prosthesis, placing an implant, or performing a transplant after extracting the deciduous tooth. Among these possibilities, autotransplantation combined with orthodontic treatment corrects both function and esthetics. This report describes the case of a 7-year-old girl with multiple congenitally missing teeth and an impacted right mandibular second premolar. Timely autotransplantation of the impacted mandibular tooth to the region of the congenitally missing right maxillary second premolar produced favorable results.


2009 ◽  
Vol 19 (6) ◽  
pp. 932-941 ◽  
Author(s):  
Youngmin Cho ◽  
Bokyung Kim ◽  
Dongpil Kim ◽  
Myungwan Han ◽  
Moonyong Lee

2009 ◽  
Vol 33 (6) ◽  
pp. 1202-1211 ◽  
Author(s):  
Sourabh Gupta ◽  
S. Ray ◽  
A.N. Samanta

2007 ◽  
Author(s):  
Youngmin Cho ◽  
Bokyung Kim ◽  
Dongpil Kim ◽  
Myungwan Han

Sign in / Sign up

Export Citation Format

Share Document