Pre-Bending Motion Strategy Analysis of a 3-DOF UACT Robotic Finger

Motion strategy analysis at the pre-bending stage is a fundamental component of underactuated finger grasp research. This study presents the pre-bending motion strategy and corresponding analysis of cable driving forces a 3-DOF underactuated finger comprising cable truss units. This robotic finger uses a tendon-pulley transmission and parallel four-linkage mechanism to realize the grasp capability. The structure and four motion strategies at the pre-bending stage are illustrated. The equivalent joint-driven and quasi-static motion models are established in the case where one or two cable driving forces drive the finger. In accordance with the virtual work principle, the tendon-pulley transmission is transformed into an equivalent joint-driven system. On the basis of the constraints of maximum motion space of the finger, the joint spring stiffness distributions are discussed and the finger quasi-static motion space is analyzed under the condition of single motor driving force. The unique coupled motion process and corresponding cable driving force of the finger driven by a single motor are assessed. Furthermore, three other typical quasi-static motion strategies and their corresponding cable driving forces are discussed. Valid simulation experiments are conducted to verify the accuracy of the quasi-static motion strategy. The analysis of this study can provide guidance and a theoretical reference for the design of cable-driven underactuated hands and control of the couple-driven underactuated mechanism.

Follow-the-leader motion strategy for multi-section continuum robots based on differential evolution algorithm

Purpose The purpose of this paper is to present a follow-the-leader motion strategy for multi-section continuum robots, which aims to make the robot have the motion ability in a confined environment and avoid a collision. Design/methodology/approach First, the mechanical design of a multi-section continuum robot is introduced and the forward kinematic model is built. After that, the follow-the-leader motion strategy is proposed and the differential evolution (DE) algorithm for calculating optimal posture parameters is presented. Then simulations and experiments are carried out on a series of predefined paths to analyze the performance of the follow-the-leader motion. Findings The follow-the-leader motion can be well performed on the continuum robots this study proposes in this research. The experimental results show that the deviation from the path is less than 9.7% and the tip error is no more than 15.6%. Research limitations/implications Currently, the follow-the-leader motion is affected by the following factors such as gravity and continuum robot design. Furthermore, the position error is not compensated under open-loop control. In future work, this paper will improve the accuracy of the robot and introduce a closed-loop control strategy to improve the motion accuracy. Originality/value The main contribution of this paper is to present an algorithm to generate follow-the-leader motion of the continuum robot based on DE. This method is suitable for solving new arrangements in the process of following a nonlinear path. Then, it is expected to promote the engineering application of the continuum robot.

An inchworm-inspired motion strategy for robotic swarms

Effective motion planning and localization are necessary tasks for swarm robotic systems to maintain a desired formation while maneuvering. Herein, we present an inchworm-inspired strategy that addresses both these tasks concurrently using anchor robots. The proposed strategy is novel as, by dynamically and optimally selecting the anchor robots, it allows the swarm to maximize its localization performance while also considering secondary objectives, such as the swarm’s speed. A complementary novel method for swarm localization, that fuses inter-robot proximity measurements and motion commands, is also presented. Numerous simulated and physical experiments are included to illustrate our contributions.

Design of a hesitant movement gesture for mobile robots

In previous experiments, a back-off movement was introduced as a motion strategy of robots to facilitate the order of passage at bottlenecks in human-robot spatial interaction. In this article we take a closer look at the appropriate application of motion parameters that make the backward movement legible. Related works in distance perception, size-speed illusions, and viewpoint-based legibility considerations suggest a relationship between the size of the robot and the observer’s perspective on the expected execution of this movement. We performed a participant experiment (N = 50) in a virtual reality environment where participants adjusted the minimum required back-off length and preferred back-off speed as a result of the robot size, and the viewpoint of the back-off movement. We target a model-based approach on how appropriate back-off design translates to different sized robots and observer’s viewpoints. Thus, we allow the application of back-off in a variety of autonomous moving systems. The results show a significant correlation between the increasingly expected back-off lengths with increasing robot size, but only weak effects of the viewpoint on the requirements of this movement. An exploratory analysis suggests that execution time might be a promising parameter to consider for the design of legible motion.

Structuring of tactile sensory information for category formation in robotics palpation

This paper proposes a framework to investigate the influence of physical interactions to sensory information, during robotic palpation. We embed a capacitive tactile sensor on a robotic arm to probe a soft phantom and detect and classify hard inclusions within it. A combination of PCA and K-Means clustering is used to: first, reduce the dimensionality of the spatiotemporal data obtained through the probing of each area in the phantom; second categorize the re-encoded data into a given number of categories. Results show that appropriate probing interactions can be useful in compensating for the quality of the data, or lack thereof. Finally, we test the proposed framework on a palpation scenario where a Support Vector Machine classifier is trained to discriminate amongst different types of hard inclusions. We show the proposed framework is capable of predicting the best-performing motion strategy, as well as the relative classification performance of the SVM classifier, solely based on unsupervised cluster analysis methods.